Professional Documents
Culture Documents
TP Villanueva
TP Villanueva
BSIT-301
The transmitter is responsible for sampling, quantization, and encoding the signal. Low pass filters
allows a continuing message to be transmitted by a signal to flow through it. The low pass filter sends
samples to the sampler.
so that each sample is rounded to the closest discrete level. As a result of the sampler's continuous
range signal,
Still analog, the signal. The quantizer approximates each sample while allocating a specific discrete level.
The encoder then converts the quantized signal into binary format.
A digitally encoded signal is the result of this module's modulated binary pulse output.
It is transmitted via the transmission path. To restore the signal after being affected by undesirable
The transmission line includes a regenerative receiver to reduce background noise. Equalization circuits
change the
once the PCM signal has been tuned for the repeater, a distorted signal will result. Finally, the recipient
Section first encodes the signal at the receiver before decoding it.
In order to receive a precise signal, the regenerative repeater is likewise fitted on the receiving end.
transmission of the PCM signal. Digital-to-analog converters employ scanners to convert digital
Roger VI Villanueva
BSIT-301
to analog format the signals. A low pass filter is used by the sampler to produce an analog signal, which
is not the same as the
first message indication. The process utilized on the original analog message signal to produce the
On the receiving side, the sending side is somewhat flipped. A is impacted by the number of bits per
sample.