Professional Documents
Culture Documents
TCD Maintenance Blg. Boq
TCD Maintenance Blg. Boq
ROOF SLAB
01 Apply APP modified bituminious membrane
min.thickness not less than 4mm slated finish
water proofing or equivalentmaterial for
concrete roof slab of office building all
as per the manufacturer's instruction. The cost
shall include cleaning of all dirts and dust
materials. The work shall be done on
sub-contractual base with the supplier
of the material which will give material
and construction guarantee to the client .
The work shall include tasting of roof
leakage after completion of the work. m2 438
WET AREA
02 Apply Cementious water proofing material
which shall seal void by crystallization as per
the manufacturer's instruction all toilet floors
and walls at the height of 500mm from floor
finish level.The cost shall include cleaning of all
dirts, trace of grease,oil and loose particles.
the supplier of the material which will give
material & construction gurantee to the client. m2 108
AMOUNT
ITEM DESCRIPTION UNIT QTY RATE AMOUNT
SANITARY INSTALLATION
SOAP HOLDER
02 Supply and fix approved quality soap holder made of
white vitreous china (150x150mm). No 25
WATER CLOSET
04 Supply and fix water closet,of wash down action,
floor mounted, bottom outlet (floor drainage), close
coupled, made of white virteous china. The fixture
shall conform to BS3402 or equivalent institution.
The waste fittings, connecting pieces, fixing and
supporting element and other accessories which
complete the set shall comply with the relevant
clauses of BS standards. No 21
BIDET SHOWER
06 Supply and fix approved quality bidet shower, with
adjustable chrome plated pressure shut off valve, a
bracket used to attach it to the wall, a stainless steel
hose, complete with all the necessary accessories.
The set shall comply with the relevant clauses of BS
standards or equivalent institution. Min. length 1.2m No 21
URINAL
07 Supply and fix approved quality wall mounted
urinal in vitreous china unitback in id spreader,
concealed steel hanger,concealed flush pipes,
50cmx70cm,15mm thick ceramic urinal partition
wall complete with all necessary accessories. Nº 5
SHOWER TRAY
08 Supply and fix Shower trays made from
vitreous enameled sheet steel, slip resistant
with adjustable shower head and all other
necessary accessories.The fixture shall
conform to BS6340-7:1983 or equivalent
institution. The waste fittings, connecting
pieces, fixing and supporting element shall
comply with the relevant clauses of BS
standards or equivalent institution.
Size:- 700 x 700 mm. No 2
TOWEL HANGER
09 Supply and fix towel hanger 610 x 25 mm with
chrome plated tubular towel rail complete with
the necessary accessories. No 2
KITCHEN SINK
10 Supply and fix stainless steel Sink ,double bowl,
complete with trap,drain connection,drainage
and over flow, heavy duty mixing faucet, plug,
chain, etc. and all other necessary accssories.
Size:- 1200 x 500 x150mm (bowl depth) Nº 2
FLOOR DRAIN
LABORATORY SINKS
12 Supply and fix vulcathene laboratory sink. The
fixture shall conform to BS EN ISO9001 or
equivalent institution. Size 492 x 241 x171 mm.
With swivel swan neck nozzle outlet, with water
controller, (anti-rotation pin ), bench mounted, per
standard of ISO9001 or equivalent institution.
The waste fittings shall include anti-syphone bottle
dilution recovery trap ,standing waste tube, plug,
chain assembly, standard support, angle valves
and all accessories nessacary to complete the set. Nº 12
TAPS
15 Supply and install PN-20 garden Taps of approved
quality and brand of Brass type water nozzle,UBM
or equivalen ended with hose connection.
Diameter 20mm Nº 2
FIRE EXTINGUISHER
PPR-PIPES
20 Supply, lay and connect outer diameter 20mm
POLYPROPYLENE RANDOM CO-POLYMER
(PP-R TYPE3) pressure pipes ,(PN16),for cold
water supply system to sanitary fixtures which
comply with BS 6920:part 2&3 or DIN 8078 and
equivalent institution complete with all the necessary
connecting pieces such as bends, Ys, Tees, reducers,
nipples,teflon, unions, threaded male or female with
de-zincification resistance (DZR) brass inserts
complying with BS 6920 or equivalent institution,
hangers(as per manufacturer's recommendation) &
supporters (if any) etc…
The installation shall be tested at a pressure of
10kgf/cm2 or DIN 1988 part 2 or BS 6700 .
Unit price shall include ,disinfection of the pipes with
Chlorine, painting all exposed PP-R pipes with UV
Reflexive oil paint, installation works any all additional
works there to . ml 76
ANGLE VALVE
25 Supply and fix chrome plated service (angle)valves,
of approved standared, before sink,shower and other
fixtures complete with unions, elastic water proofing,
hand wheels of normal quality and with all other
necessary accessories.
Diameter:1/2''(20mm OD) Nº 96
HDPE-PIPES
26 Supply, lay , test and commision diameter
32mm (Nominal outside diameter) HDPE /High
Density Polyethelyne Pipe/ (PN16) for roof water supply
system as shown on the drawing.The HDPE pipes shall
be supplied complete with all the necessary
accessories connecting pieces such as bends, Ts,
reducers, adaptors,sockets,unions ,thrust or
hangers blocks & supporters . Unit price shall
include provision of thrust blocks construction
at where it is necessary, excavation of trench
(min.depth 60cm),back fill with selected material,
compacting and all the necessary assistance to the
installation works ...etc The installation shall be
tested at a pressure of 10kgf/cm2.The HDPE
pipes,accessories ,fittings & method of welding
shall comply with the requirement BS 6437 &
BS 6730 or equavalent institution. ml 12
VENT CAPS
36 Supply and install vent caps made of rigid uPVC
to be connected to the roof terminal of vent pipe
diameter 80mm, with min. wall thickness of 3.0mm No 3
uPVC PIPE
38 Supply and fix Diameter 110mm uPVC Downpipes,
min. wall thickness 3.2mm ,with mass concrete
support at ground level & complete with UV reflective
oil painting, basket strainer at inlet ,galvanized clips
at every 1.0meters interval and all accessories .
The pipes ,accessories,fittings &method of welding
shall comply with the requirement of BS 4514or
equivalent Institution.Unit price shall include all the
necessary assistances to the installation works there to. ml 325
GROUND RESERVOIR
03 Supply and fix 20m³ Glass Reinforced
Plastic water tank (GRP) made of
SMC(Sheet Molding Compound)
using stainless steel for interior structure
& plated steel for exterior that should be
completely opaque including level indicator,
truss foot,scour drain,anti-corrosion anode,
roof ventilator,with intenal ladder and
aluminium external access ladder ,scour basin
and all other necessary accessories all as per
the manufacturer's instruction.
Unit cost shall include water supply pipes,fitting and
accessories, excavation and preparation of
for installation,leveling and compacting of sand
and all necessary works there to.
maximum tank height is 4m. Nº 1 320,000 320,000.00
PUMP
04 Supply and install and commission CALPEDA
or equivalent electric driven centrifugal booster water
pump where one is standby complete with all
accessories such as pressuregauge, non- return valve,
bronze gate valves protection IP54 (according to ICE60034),
etc the pump shall be made of stainless/tempered
steel empeller and shaft with bus- chrome plated
steel feet.
Price shall include provision of gate valves
non-return valve and all assistance works there
to.
Discharge , Q = 100litre/minute
Head, H = 25-30 meter
Suction end diameter size = 50mm
Delivery end diameter size = 40 mm
Efficiency > 65% Nº 2 21,500 43,000.00