Professional Documents
Culture Documents
Tractive Effort - RailElectrica - RailElectrica
Tractive Effort - RailElectrica - RailElectrica
Tractive Effort - RailElectrica - RailElectrica
RailElectrica Topics Railway Job Test Preparation Rail News About RailElectrica Contact Us
Tractive Effort
Mahesh Kumar Jain May 12, 2013
Tractive effort is the force required to haul a load. Tractive effort, when multiplied with speed at which the train is required to run, gives the
HorsePower. Importance of Tractive effort lies with its capability to start a train on the gradient and run it up to a speed of around 30 kmph whereas
that of Horse Power is its ability to achieve and run at the maximum permissible speed. The most important source to provide Traction Mechanics –
Train, grade, curve and Acceleration Resistance power in the locomotive is Traction Motor. Tractive Motor is a class of Electric Motor which has the
characteristics to match the load requirement of traction such as high starting tractive effort and self-corrective action with variable load.
Traction Motor used for traction purpose is DC Series Motor, Separately Excited DC Series Motor, Three Phase Induction Motor, Synchronous Motor and
Permanent Magnet Synchronous Motor. Whatever may be source or principle of working of traction motor, all provide Tractive effort characteristics to
encounter train resistance and provide acceleration.
AB This is constant tractive effort line generally up to a speed of 30-50kmph. Point B is the maximum power point. OA is decided basedTOP
on the
continuous rating of Traction Motor and adhesion limits. This curve is lifted upward by overloading traction motor utilising the thermal capacity of the
https://www.railelectrica.com/traction-mechanics/tractive-effort/ 1/4
12/12/22, 11:21 AM Tractive Effort | RailElectrica : RailElectrica
traction motor.
BC This is a constant power line in which tractive effort drops with increasing speed in inverse proportion. For passenger locos, need for the
tractive effort is less as compared to speed therefore tractive effort characteristics at the lower end is at reduced power.
CD Maximum limit of speed is imposed on the mechanical design of the traction motor and mechanical transmission.
TR This is train resistance curve. Point of intersection determines the speed at which tractive effort equals train resistance. Acceleration reserve
exists up to the point of intersection. The curve TR moves up and down while running on up and downgradient.
EF This line gives the limit of adhesive weight and Tractive effort has to be within this limit.
It is possible to overload a motor for a short period because the temperature rise is slow as compared to the time period required for
acceleration. This time period is in the range of 2, 10 and 30-minute overloading capability of 150, 120 and 110% during which the temperature rise is
within the class of insulation for which the traction motor is designed. This helps in taking advantage during the start of the motor when it has to exert
high tractive effort where current drawn is more than the continuous rating and thereafter for some more time when it provides higher acceleration
effort.
Driving force of Traction motor is transmitted to wheel through the reduction gearing arrangement to meet the requirement of high tractive effort and
low speed as compared to high speed and a low tractive effort of the traction motor. Transmission may be either through only reduction gear called
partly suspended motor and via flexible coupling and reduction gear called fully suspended motor.
Let the number of teeth & rpm of traction motor pinion and wheel gear are t & Ntm and T & Nw (note t is always smaller than T) respectively, wheel
diameter is Dw in meter and Ntm in rpm then we get
Where ɳ is efficiency, τ= torque produced by TM, Dw is wheel diameter and Gris called gear ratio
The function of gearing is similar to a transformer in an electrical circuit where voltage and current represent torque and speed respectively.
A high gear ratio locomotive produces more tractive effort at the start as compared to low gear ratio locomotive and decides the suitability of
locomotive for freight and passenger application with the same rating of the traction motor.
TOP
Comparison of Gear ratio for a different class of locomotive and Electrical Multiple units
https://www.railelectrica.com/traction-mechanics/tractive-effort/ 2/4
12/12/22, 11:21 AM Tractive Effort | RailElectrica : RailElectrica
Ad
Post a Comment
Your email address will not be published. Required fields are marked *
Comment
Name *
Email *
TOP
https://www.railelectrica.com/traction-mechanics/tractive-effort/ 3/4
12/12/22, 11:21 AM Tractive Effort | RailElectrica : RailElectrica
Website
Save my name, email, and website in this browser for the next time I comment.
Post Comment
qwer
January 18, 2019 at 10:32 am
Reply
K.S.Rawat
May 31, 2020 at 12:18 pm
कृ पया यह बताए,कि TE limit Switch ऑन करने से लोको पर क्या प्रभाव पड़ता हैं?
Reply
« Prev Next »
RailElectrica
© 2022 RailElectrica. All rights reserved. This blog or any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission
of the publisher.
TOP
https://www.railelectrica.com/traction-mechanics/tractive-effort/ 4/4