Professional Documents
Culture Documents
Power Boos 300-9
Power Boos 300-9
Power Boos 300-9
Option Bucket
Arm 1 Arm
regeneration
Boom 2 Arm 2
Swing Boom 1
Travel(RH) Travel(LH)
Main relief
valve
PS
P1 P2
pressure pressure
PS
Power boost
solenoid valve
Engine
ECM
Main pump Pilot pump
Power boost Pump power
button
shift EPPR
CAN
Signal
LH control
lever
Drive signal
Power max button signal
Pressure signal
MCU
Accel dial signal CN-16A CN-16
Normal
CN-16B
Emergency
Accel dial
Power mode sw signal
Power max
pilot lamp
Cluster 3009A5MS06
· When the power boost switch on the left control lever knob is pushed ON, the power mode is set P
mode and maximum digging power is increased by 10 %.
· When the power boost function is activated, the power boost solenoid valve pilot pressure raises the
set pressure of the main relief valve to increase the digging power.
Description Condition Function
- Power mode : P
- Accel dial power : 9
Power boost switch : ON
Activated - Power boost solenoid : ON
Accel dial : over 8
- Power boost pilot lmap : ON
- Operating time : max 8 seconds
- Pre-set power mode
Canceled Power boost switch : OFF - Power boost solenoid : OFF
- Power boost pilot lamp : OFF
※ When the auto power boost is set to Enable and power mode is set to P mode on the cluster, the
digging power is automatically increased as working conditions by the MCU. It is operated max 8
seconds.
5-7