Professional Documents
Culture Documents
JC Ceiling Paint
JC Ceiling Paint
JC Ceiling Paint
901
DAICEC JOB CARD APPLICATION OF WATER BASE ENAMEL PAINT Rev. No. 00
Page 01 of 02
Sector & Zone: C,D L 03, ZONE C,D C09,C10,D07,D10 Date of Inspection: 6/15/2019
1.901.2.1 Accessibility : Safe access to area visually (Evaluate and write 1 to 5) 2 Safe Access
1.901.2.2 Safety: Adequate Safety precautions being taken (Evaluate and Write 1 to 5) 3 comply safety requirement
1.901.2.3 Lighting : Provision of ambient task lighting facility (evaluate 0 or 1) 3 Non-Critical lighting
1.901.2.6 Moisture content : Check for Moisture content of substrate (Record moisture content in %) 3 Max. 15%
1.901.3.2 Consistency : Stir with spindle mechanically for homogeneity (evaluate and write 1 to 5) 2 Consistent homogeneity
Surface preparation: Smoothen the surface by filling dents with ICI Acrylic wall putty up Sand with emery paper 180
1.901.3.5 2
to maximum thickness of 3-4 mm . (write 0 or 1) if irregularities are observed
1.901.3.6 Application : Apply ICI acrylic wall putty on surface (evaluate and write 1 to 5) 2 With Putty blade uniformly
Surface preparation: Sand the surface with emery paper 180 and wipe clean. (Write 0 or Uniform surface shall be
1.901.3.9 2
1) achieved
1.901.3.10 Application : Apply ICI acrylic wall putty on surface (evaluate and write 1 to 5) 2 With Putty blade uniformly
Sector & Zone: C,D L 03, ZONE C,D C09,C10,D07,D10 Date of Inspection: 6/15/2019
Surface preparation: Sand the surface with emery paper 180 and wipe clean. (Write 0 or Uniform surface shall be
1.901.3.13 2
1) achieved
1.901.3.15 Consistency : Stir with spindle mechanically (evaluate and write 1 to 5) 2 Consistent homogeneity
Surface preparation: Sand the surface with emery paper 380 and wipe clean. (Write 0 or Uniform surface shall be
1.901.3.18 2
1) achieved
Mixing : Mix Dulux Satin stay bright (SPL OC 65) with water and stir with spindle In ratio of 1:0.25
1.901.3.19 2
mechanically (Write 0 or 1) (Emulsion : Water)
Application : Apply Dulux Satin stay bright (Colour : SPL OC 65) (evaluate and write 1 to Uniform Coverage 100-120
1.901.3.20 3
5) sqft/ half litre
1.901.3.21 Drying time : Check for drying time (Write 0 or 1) 2 Min 6 hours as per TDS
Mixing : Mix Dulux Satin stay bright (SPL OC 65) with water and stir with spindle In ratio of 1:0.25
1.901.3.23 2
mechanically (Write 0 or 1) (Emulsion : Water)
Application : Apply Dulux Satin stay bright (Colour : SPL OC 65) (evaluate and write 1 to Coverage 100-120
1.901.3.24 3
5) sqft/ half litre
1.901.3.25 Drying time : Check for drying time (Write 0 or 1) 2 Min 6 hours as per TDS
1.901.3.26 Post two coats of Dulux Satin stay bright (Colour : SPL OC 65)
Final Finish : undulations shall be minimised and shall match to mock up (Evaluate and
1.901.3.27 3 match to SPL OC 65
write 1 to 5)
Uniformity of shade : Check colour shade comparing with approved sample in provided
1.901.3.28 3 no change in shade
lighting. (Evaluate and write 1 to 5)
Joint marks : Check for joint mark between adjacent coated area in provided lighting.
1.901.3.29 3 no joint mark
(Evaluate and write 1 to 5)
Overall workmanship
No Objection by the Samsung C&T's Representative shall not relieve SIL of its obligation to complete all the work in accordance with Contract Documents.
Comments: