Professional Documents
Culture Documents
Autocad-Individual Mini Project
Autocad-Individual Mini Project
Autocad-Individual Mini Project
The development assessment project is about 3D designing. In this project, you are required
to 3D design a part/object/building of your choice in AutoCAD. The concept of the selected
part must the futuristic such as flying cars, drones, airplanes, smart buildings, trains, etc. The
project reflects class learning outcome four and contains a weightage of 35% of the total, 20%
is for 3D design in AutoCAD, and 15% is for a report.
Learning Outcome
In summary, part of the coursework you are expected to carry out the following:
1. Produce a 3D CAD of a part/object/building.
2. Produce a report.
3D CAD (20%)
• The complexity of the design (5%)
• Utilization of commands (5%)
• Creativity (5%)
• Software Skills (5%)
Report (15%)
This coursework is to be carried out individually. You are required to submit a report. Details
are given below.
Report – this should consist of the following
• Executive summary (3%)
• Design procedure (5%)
• Commands used (2%)
• Picture of parts in different views (2%)
• Conclusion (3%)
• AutoCAD file (Upload at google classroom)
Examples