Professional Documents
Culture Documents
Bow Mast Model - 3
Bow Mast Model - 3
F F
25 730.26
25 ROD
310
400
E E
25
100
D 1 D
R25
300
25
75
R7
50
69.27
132.75 25
C 2 C
1 QTY.1 No
335
10
10
NOTE 1:
1. Material of construction: Stainless steel SS 316 L 32.5
10
B 2. Rod shall be bend as per drawing 32.5 B
R10
3. Stiffeners shall be machined and welded on ros as per the IS standard fine tolerance.
4. Stiffener and rod shall be welded on the interfacing plate. 2
5. Weld should be carried out as per IS standard. QTY.4 Nos LIFTING HOOK
6. All surface should be cleaned and buffed after machinig/welding process. INITIAL DATE Indian National Centre for Ocean
7. Shackle 1" (Crosby/Gunnebo), qty - 02 nos. shall be supplied along with the cage. DRAWN Information Services (INCOIS),
8. All dimensions are in mm. CHEC'D.
Hyderabad.
APPR'D.
MATERIAL: WEIGHT:
ISSUED
PROJECTION All dimensions SCALE: SHEET: SIZE:
A are in mm unless DRG NO: REV: A
otherwise specified.
INCOIS/LADCP FRAME/MECH/PART-08
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF INCOIS, HYDERABAD AND SHALL NOT BE COPIED, REPRODUCED OR COMMUNICATED TO OTHERS WITHOUT PROPER AUTHORIZATION
8 7 6 5 4 3 2 1