Professional Documents
Culture Documents
PRD LC 300
PRD LC 300
Liquid Chromatography
Key Features:
• Enhanced ease-of-use and
operational simplicity
• High visibility color display for immediate
assessment of system status
• Integrated solvent containment and column
oven for reduced system complexity
• Precise, repeatable solvent delivery
• Outstanding injection reproducibility – even at
low volumes
• Automated sample dilution and derivatization
• Wide range of detectors: PDA,
Multi-Wavelength UV/Vis,
Single wavelength UV/Vis, FL and RI
• Robust and easy to maintain system
• Fully controlled by PerkinElmer
Simplicity™Chrom and other leading
CDS platforms
• Instrument control and data acquisition via
Ethernet communication
High sensitivity detection is essential for most LC applications. and easily to the system via Ethernet communication to provide
The PerkinElmer LC 300 system can be configured with either a robust control and secure data transfer. All detectors feature
single detector, or multiple LC detection options to meet all of an integrated solvent and waste tubing management system,
your needs, even if they evolve or change in the future. Whether while the PDA, MWD and UV/Vis detectors also feature a built-
its photodiode array (PDA), multi-wavelength UV/Vis (MWD), in solvent organizer to reduce the number of modules in the LC
single wavelength UV/Vis, fluorescence (FL) or refractive index stack, thus reducing asset management complexity.
(RI) detection, the LC 300 family of detectors connect quickly
3
LC 300 PHOTODIODE ARRAY DETECTOR (PDA)
The LC 300 PDA detector is ideal for laboratories balancing allows for one-motion installation and exchange, enabling greater
high sample throughput requirements with methods that flexibility and ultimately higher productivity in your lab. To
demand high levels of sensitivity. Additionally, the PDA further improve your sensitivity, an optional 50 mm flow cell
detector’s qualitative capabilities of spectral identification and is available. The combination of sampling rates up to 200 Hz,
confirmation reduce risk and increase confidence in analysis. low optical dispersion, and the benefits of spectral identification
make the LC 300 PDA detector the perfect solution for almost
The LC 300 PDA’s wide linear dynamic range (up to 2.0 AU
any application.
with less than 3% deviation) rivals or exceeds that of even
conventional UV detectors. Low baseline noise coupled
with high linear dynamic range provides for the ultimate in
analyte concentration tolerance. This allows detection from
very low concentrations (those previously lost in the noise)
to high concentrations, with no need to dilute samples. An
interchangeable, modular, novel patented* flow cell design Patented light guided 50 mm flow cell.
The LC 300 Multi-Wavelength UV/Vis detector (MWD) is dilute samples. Borrowing from the LC 300 PDA design, the
designed for laboratories that require more than one single MWD also features an interchangeable modular flow cell that
wavelength to be monitored, processed and stored per analysis. allows for quick and easy one-motion installation and exchange,
In fact, the LC 300 MWD allows for the collection of up to eight enabling greater flexibility and higher productivity in your lab.
channels simultaneously at any desired wavelength or sampling To further improve your sensitivity, an optional patented 50 mm
rate. The LC 300 MWD offers a wide linear dynamic range flow cell is available. To future-proof your investment should
(up to 2.0 AU, with less than 3% deviation), very low baseline your analysis needs change, you can upgrade your MWD to a
noise, and sampling rates up to 200 Hz. This allows detection full-featured photodiode array detector with spectral analysis
from very low to very high concentrations, with no need to capabilities.
The LC 300 UV/Vis detector was designed to achieve a for high sensitivity in the visible region – a sacrifice many
high level of sensitivity and stability through innovative other detectors make when using a single, universal source
engineering. The LC 300 UV/Vis features a proven dual-beam lamp design. The LC 300 UV/Vis can be optimized for any
optical design for ultimate stability and sensitivity. Utilizing an application, and supports sample rates up to 100 Hz for
optional tungsten lamp, the LC 300 UV/Vis can be configured UHPLC application needs.
The LC 300 Fluorescence detector enables the selective temperature-controlled cell body design. The LC 300
detection of fluorescing compounds, with sensitivity that Fluorescence detector can simultaneously collect data at two
can be up to 1,000 times greater than UV detection, which sets of wavelengths (excitation and emission) for additional
is critical in many applications. The LC 300 Fluorescence chromatographic confirmation. An integrated mercury
detector was designed to achieve a high level of sensitivity and lamp is provided to check wavelength accuracy, ensuring
stability through innovative engineering, including low noise confidence in performance.
electronics, an axially irradiated flow cell, and a dynamically
*US Patent Numbers US8797528, US8947654, and US9025142; Chinese Patent Number CN204945029; EU Patent Allowed EP13780024.9
4
LC 300 REFRACTIVE INDEX DETECTOR
The LC 300 Refractive Index (RI) detector enables the system mounted within a precisely temperature-controlled
detection of compounds that do not absorb in the UV/Vis housing, reducing the impact of even subtle changes in
range, and do not naturally, or cannot be made to fluoresce. ambient temperature. The LC 300 RI detector contains a
RI detection is commonly employed in the analysis of long-life LED light source for the ultimate in uptime and
carbohydrates and sweeteners. The LC 300 RI detector was productivity.
designed to achieve outstanding stability through an optical
The LC 300 Waste Management Module allows for switch allows for easy and efficient powering on and off
increased flexibility with the option to drain from the front of the entire system. A standalone solvent organizer is also
or the back of this module. An integrated power strip built available for the LC 300.
into the instrument streamlines operation, and reduces
external power outlet requirements. Further, a single power
Key Features Include:
• Drainage from front or back
• Built-in power strip
• Easily accessible single power switch for the entire system
PerkinElmer, Inc.
940 Winter Street
Waltham, MA 02451 USA
P: (800) 762-4000 or
(+1) 203-925-4602
www.perkinelmer.com
Copyright ©2020, PerkinElmer, Inc. All rights reserved. PerkinElmer® is a registered trademark of PerkinElmer, Inc. All other trademarks are the property of their respective owners.
73766 PKI