Professional Documents
Culture Documents
Clutch Power Point From Eaton - Compress
Clutch Power Point From Eaton - Compress
Maintenance
1) Friction material
2) Surface area
3) Clamp load
Cover Assemblies
V.C.T. ™
Clutch Brakes
1-3/4 and 2.00”
Single piece “Torque Limiting”
Two piece - non torque limiting
How They Work Together
How They Work Together
What Wears and Why Adjust for
It?
When to Replace the Clutch
Eaton clutches should be replaced
when internal adjustment can not
correct for a loss of free-pedal or can
not compensate for a slipping clutch
15.5” HD Eaton
Spicer Solo
14” MD Eaton
Spicer Solo
Spicer Solo Heavy-Duty
Spicer Solo Medium-Duty
How It Works
Cam Spring Release Bearing
Bracket
Cams
Shipping
Bolt Plate
Spacer
Pressure Plate
How It Works
Plate Spacer Controlled Gap
Engine Flywheel
Retainer
Release Bearing
Intermediate Plate
Pressure Spring
Adjusting ring
Clutch Failure analysis
Yoke Bridge Rubbing into Cover
•By using the adjusting ring, because each of the 6 levers has more
than one witness mark (or lever fulcrum point).
Bent/Broken Kwik-Adjust
Mechanism
•From not releasing the load from the pressure plate before
making an adjustment.
Release Bearing Assembly
Broke Away from Release
Sleeve
•Engine torsionals/vibration.
Rear Disc Interfering with the
Retainer Assembly