The trial frame usage instructions document provides information on adjusting the trial frame for optimal refraction including:
1) Adjusting the monocular pupillary distance and binocular PD by rotating the knobs above each lens well.
2) Inserting the highest powered trial lens closest to the cornea for clear vision.
3) Using a Jackson Cross Cylinder and adjusting the cylindrical lens axis to find the clearest vision and correct astigmatism.
4) Adjusting additional frame features like the temple length, nose pad position, and cylinder axis marking.
The trial frame usage instructions document provides information on adjusting the trial frame for optimal refraction including:
1) Adjusting the monocular pupillary distance and binocular PD by rotating the knobs above each lens well.
2) Inserting the highest powered trial lens closest to the cornea for clear vision.
3) Using a Jackson Cross Cylinder and adjusting the cylindrical lens axis to find the clearest vision and correct astigmatism.
4) Adjusting additional frame features like the temple length, nose pad position, and cylinder axis marking.
The trial frame usage instructions document provides information on adjusting the trial frame for optimal refraction including:
1) Adjusting the monocular pupillary distance and binocular PD by rotating the knobs above each lens well.
2) Inserting the highest powered trial lens closest to the cornea for clear vision.
3) Using a Jackson Cross Cylinder and adjusting the cylindrical lens axis to find the clearest vision and correct astigmatism.
4) Adjusting additional frame features like the temple length, nose pad position, and cylinder axis marking.
The trial frame usage instructions document provides information on adjusting the trial frame for optimal refraction including:
1) Adjusting the monocular pupillary distance and binocular PD by rotating the knobs above each lens well.
2) Inserting the highest powered trial lens closest to the cornea for clear vision.
3) Using a Jackson Cross Cylinder and adjusting the cylindrical lens axis to find the clearest vision and correct astigmatism.
4) Adjusting additional frame features like the temple length, nose pad position, and cylinder axis marking.
PD Adjustment Insertion of Lenses Astigmatic Refraction
Monocular pupillary distances can be For optimal optical clarity, insert the least With the previous spherical lens in place, adjusted by rotating the adjusting knob of number of lenses possible to create the use a Jackson Cross Cylinder (JCC) to each eye, located above each lens well. The desired power. The highest powered lens determine the amount of cylinder in the arrows above the lens wells indicate each should be placed closest to the cornea (in patient’s refractive error. Place the JCC in monocular pupillary distance. Adding the the back lens clamp.) Always replace the front of the patient’s eye. To correct the axis PD values for each eye equals the binocular trial lenses in the case when not in use. position, center the two axes of the JCC PD value. Insert the lens quickly and accurately. around the patient’s current cylindrical lens axis. Then turn the JCC and check the visu- Adjustment of the Temple Length al acuity at the two opposite positions. If the The temple length may be adjusted by loos- Trial Frame Refraction visual acuity is better at one position, the ening the knob on top of the temple and Spherical Refraction: Start with a spherical axis of the cylindrical lens can be turned pulling on the end of the temple. When the lens approximately equal to the amount of slightly in the direction of the position mark of correct temple length has been established, the patient’s prescription. Then using +/- the clearer one. Then test again until the dif- the knob may be tightened to secure the 0.25 or +/- 0.50 lenses as test lenses, ask ference of visual acuity at the two positions length. the patient to determine which lens appears can no longer be distinguished. Turn the clearer. Then change the spherical lens in JCC lens 90° counterclockwise and deter- Adjustment of the Nose Pad the trial frame to equal the power of the pre- mine the change in visual acuity. If no There are two knobs that control the position vious spherical lens plus the clearer test change in visual acuity is noted, the degree of the nose pad. The knob at the top of the lens. Continue until the patient can not tell a of cylindrical lens used can be considered frame controls the height of the nose pad. difference between the two test lenses. suitable. Otherwise, the degree of cylindrical The angle of the frame in relation to the lens would be adjusted according to the vari- patient’s face is controlled by the knob on the ant results. The cylindrical lens is then in the front of the frame. When adjusting the nose correct position. pad, remember that the standard distance from the lens to the cornea is 12mm. Also 1-800-255-6161 remember to center the patient’s eyes with Fax 1-800-397-0013 the optical centers of the lenses. www.amconlabs.com Technical Information: Maintenance: • Range of Binocular Pupil Distance This product should be used at normal tem- (PD) Adjustment: 48-80mm peratures. Keep the room well ventilated and prevent the trial frame from damp and cold • Range of Monocular PD Adjustment: 24-40mm environments. • Minimum Calibration Value: 1mm Do not dismantle the trial frame. Precise • Axial Calibration for Right Eye: 45° adjustment has been made before delivery. through 180° to 135° In order to guarantee the service life of this AMCON • Axial Calibration for Left Eye: 120° product, avoid impact to prevent the compo- TRIAL FRAME MANUAL through 0° to 60° nents from damage or deformation. EQ-6005 • Axial calibration increases counterclockwise Keep the calibration disc and PD rod clean. along the lens frame in increments of 5° Wipe off dirt and blot with a soft cloth when needed. The trial frame is used for examination • Inner Diameter of Lens Frame: 32.5mm of patients in institutional settings, such as nursing homes and hospitals. Trial • Four lenses may be inserted in each frame refraction can also help with side of frame simultaneously. examining uncooperative children who may not sit behind the phoropter. • Each lens may be rotated around the entire 360° It may also be used to confirm a patient’s prescription after the refraction is com- • Displacement of the lens in relation to the position of lens frame geometric center: < 0.3mm pleted, by allowing the patient to walk around wearing the new prescription • Nose pad adjustment length: 0-14mm before glasses are made.