Agrolog EU - Declaration - of - Conformity - 18092019 - E20 - 220909 - 153922

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

EU declaration of conformity

The manufacturer declaration of conformity with the requirements on:


Equipment intended for use in Potentially Explosive Atmospheres (ATEX) Directive 2014/34/EU
Electromagnetic Compatibility (EMC) Directive 2014/30/EU
Low Voltage (LVD) Directive 2014/35/EU

Manufacturer:
Supertech Agroline ApS
Maltgørevej 7
DK-5471
Denmark
ISO 9001:2015 Certificate registration no.: 19ISO0107

Type of Equipment
Part of Agrolog.io and AgroLog intelligent surveillance solution for grain and crop monitoring

Product name this declaration conforms


TMS 2000 (system must include SB5000 or SB6000)
TMS 2500 (system must include SB5000 or SB6000)
TMS 5000 (system must include NL5000, SL3000/SL5000)
TMS 6000 (system must include NL6000, SL3000/SL5000)

Model name and type with EX-marking


Model  Type  Ex‐marking 
Agrolog Sensorline  SL3000/SL5000  II 1D Ex ia IIIC T150°C Da IP66  Uo: 7,88V  Io:214mA  Po:1,3W  Ci:~0F  Hi:~0H    
Agrolog Netlink  NL5000/NL6000  II 2D Ex ib IIIC T85°C Db IP66  Uo: 7,88V  Io:214mA  Po:1,3W  Ci:~0F  Hi:~0H    
Agrolog Netcontroller  NC5000/NC6000  II (D) [Ex ia Da] IIIC IP66  Uo: 7,88V  Io:214mA  Po:1,3W  Co:114µF  Lo:5mH  Lo/Ro:108µH/Ω 
Agrolog Safety Barrier  SB5000/SB6000  II (D) [Ex ia Da] IIIC IP66  Uo: 7,88V  Io:214mA  Po:0,84W Co:114µF  Lo:5mH  Lo/Ro:337µH/Ω 

Harmonized European standards which have been applied


ISO/IEC 80079-34:2018 “Explosive atmospheres. Application of quality systems for equipment manufacturer”.
EN 60079-0:2012 + A11:2013 “Explosive atmospheres. General requirements”.
EN 60079-11:2012 “Explosive atmospheres. Equipment protection by intrinsic safety ‘i’’.
EN 61000-6-1:2007: “Generic standards - Immunity for residential, commercial and light-industrial environments”.
EN 61000-6-2:2005: “Generic standards - Immunity for industrial environments”.
EN 61000-6-4:2007 + A1:2011: “Generic standards - Emission standard for industrial environments”.
IEC61010-1: “Safety requirements for elec. equipment for measurement, control, and laboratory use - Part 1: General requirements”

ATEX product certificate no.: TÜV CY 16 ATEX 0205760 X


Notified body: ExVeritas ApS
Notified body ID: 2804
Special condition for safe use: “Only suitable certified cable entries may be used”

Date: 18.09.2019  

 
Jimmi Højkilde, Quality Manager

You might also like