Professional Documents
Culture Documents
O2 Conc SOP-WPS Office
O2 Conc SOP-WPS Office
O2 Conc SOP-WPS Office
Fill and attach the humidifier bottle with distilled water or sterilized water (you can boil water for 3
minutes and let it cool).
Place the mask or nasal cannula on the patient and check to be sure they have air flow.
The patient must use a pulse oximeter to check their oxygen level. Place the pulse oximeter on the
finger and wait a few second to get a reading.
Continue to check the machine periodically during use and note any alarm that may sound.
An alarm will sound when the machine turns on. An alarm may also signal one of the
following situations (see the user’s manual for specific alarms on your unit):
• Power failure
• Low or no flow
• low battery
• high temperature.
Check the power cord. If there is any breakage or damage, change the cable.
Check the alarm. It should give audible sound when you power on the unit.