Professional Documents
Culture Documents
TRAMMELS
TRAMMELS
TRAMMELS FOR ENGINEERING
V.Ryan © 2019
PDF FILE - CLICK HERE FOR PRINTABLE WORKSHEET
Trammels are available in a range of sizes and allow for the scribing of large arcs, beyond the capacity of
spring dividers. They are also ideal of transferring measurements. The knurled grips can be loosened and
tightened, allowing them to slide along the round section bar. This means that a distance can be set quickly
and the fine adjuster used for a more accurate measurement.
Using a trammel to scribe an arc on the surface of sheet metal, is shown below. A centre punch ‘indentation’,
is at the centre of the arc, ensuring that the trammel does not slip on the surface, during scribing.
This diagram shows a trammel being used, to determine the distance between two points of an engine
component. Once the distance has been set on the trammel, it can be transferred to a ruler, so that the mm
measurement can be read accurately.
CLICK HERE FOR EQUIPMENT AND PROCESSES INDEX PAGE
Search
Web www.technologystudent.com