Professional Documents
Culture Documents
Kepware Techonologies 2015
Kepware Techonologies 2015
KEPServerEX ™
Employing the universally accepted OPC standard, KEPServerEX maximizes the promise of OPC and expedites
project development through the use of a single server interface, regardless of the control system in use.
Multiple device drivers can be “plugged in” to one application which centralizes communications and greatly
reduces user learning curves.
Ease of Use r i ve
D
A single server interface that simplifies your projects
lien
Our intuitive interface makes industrial connectivity so easy that within minutes you
Multiple device drivers can be “plugged in”
to one application which centralizes com-
/C ion
can be providing data to your application. KEPServerEX maximizes the promise of munications and greatly reduces user
I
OPC through the use of a single server interface, ensuring shorter product learning learning curves.
HMplicat
curves, reduced system training and maintenance costs, and improved network
reliability, regardless of the control system in use!
Ap
Methods used to manage and configure 3rd party OPC servers may vary from one
manufacturer to the next. This results in a continuous process of learning each new
OPC server when a new PLC or device is used. If the goal of OPC technology is to
provide a single, well defined and reliable interface to share data, then it would
seem only natural that this goal should be matched with a single user interface to
simplify configuration.
rie t P P N
Ov
t a ro e t
Pr r i a
op l P
Se
rie rot
ta oc
r y ol
Pr r n
op e
Et
rie t P
he
ta rot
ry o
r i v
D
Features
r # 3
ve
Dri
Real world features for real world applications
Modem Support:
The server supports the use of dial up modems to connect to remote devices.
Special Modem Tags in KEPServerEX become available at the channel level when
a dial-up network connection has been created. These tags can be used to dial
a remote device, monitor the modem status while connected, and terminate Quick Client:
the call. Modem support is enabled at the Channel level in the server project. We include an OPC Quick Client application to assist you with your initial
connectivity testing. It is a full-featured OPC client application, included free with
Ethernet Encapsulation: the KEPServerEX demo product suite from our website. Using Quick Client, you can
This allows KEPServerEX serial drivers to communicate to devices with serial access all data available to the server application, including System, Diagnostic,
communication over Ethernet. The driver will communicate in Ethernet and User-defined tags. After you’ve created a simple KEPServerEX project, auto
Encapsulation mode over Ethernet to a Terminal or Device Server, which launch Quick Client from the server toolbar to test your device connection.
then provides the serial communications to the device. This allows users
to incorporate legacy serial devices into their Ethernet network. Ethernet Auto Demotion:
Encapsulation is enabled at the Channel level of KEPServerEX. This parameter allows a driver to temporarily place a KEPServerEX device off-scan
in the event that a physical device is not responding. By placing a non-responsive
device off-line, the driver can continue to optimize its communications with
Ethernet Encapsulation is supported directly in other devices on the same channel. The driver will stop communications with
the KEPServerEX which enhances the the non-responsive device for a time specified in your project, then when that
reliability of the connection period is finished, the driver will re-start communications with the device.
regardless of what
terminal server
is in use.
rie t P P N
t a ro e t
r y to w
co o r k
ls
Features
Cont’d
On-Line Fulltime:
KEPServerEX is on-line all the time, allowing
your application to be modified while the server
is communicating with client applications.
Almost all parameters can be changed while the
server is running, including com port and baud rate
configuration, along with tag editing and additions.
NT Service:
KEPServerEX runs as an NT Service under Windows NT/2000/XP/Server 2003.
Service operation is completely user-configurable from the Tools|Options
menu and can be changed at any time, allowing you to move from normal,
stand-alone program operation to NT service mode. Running as an NT
service is crucial for many applications where the server provides data to
OPC clients via DCOM. While running as a service, the server can continue
to supply OPC data across user log-in sessions and can be configured to
interact with the desktop, allowing changes to your server project.
Performance
Reliable connectivity for industrial applications
ROVED
APP
Technical Support:
207-775-1660 or 1-888-Kepware extension 211
technical.support@kepware.com
Product Updates:
Available for download from the Kepware website:
www.kepware.com
Sales:
Pricing, Quotes and Pre-Sales Support
207-775-1660 or 1-888-Kepware extension 208
sales@kepware.com
Orders:
online: www.kepware.com
email: orders@kepware.com
phone: 207-775-1660 or 1-888-Kepware extension 228
Support Online fax: 207-775-1799
As with any Kepware product, technical mail: Kepware Technologies
Attn: Sales Dept.
support is available from before the purchase P.O. Box 579
right through commissioning and beyond! Portland, ME 04112
Upgrades and demo software are available Note: With all purchases please include Company Name, Your Name, Daytime Phone Number, Shipping
for download directly from the Kepware and Billing Addresses, Your Email Address, Product Description, Product ID and Product Quantities.
System Requirements:
Complete product and system requirements and recommendations available at: www.kepware.com
This computer program is protected by copyright law and international treaties. Unauthorized use, reproduction or distribution of these programs, or any portion of them, may result in severe civil and criminal
penalties, and will be prosecuted to the maximum extent possible under the law. Modicon, U-CON, BACnet, Allen-Bradley, Yokogawa, Mitsubishi, and Siemens are registered trademarks or trademarks of their
respective owners. All other marks are the properties of their respective owners.
EXBRCH-MAR06
KEPServerEX v5 OPC and Communications Server Features Page 1 of 2
Features:
Process Mode
This parameter allows the user to specify which CPUs the 1. More features: User and Tag Management, NIC
server can be executed on when it is run on PCs containing Selection, Modem Support
more than one. 2. Application Connectivity
3. Auto Demotion
Host Name Resolution 4. Automatic Tag Database Generation
5. Communication Serialization
KEPServerEX allows for host name resolution which is an alias 6. Ethernet Encapsulation
assigned to identify a TCP/IP host or its interfaces. Host 7. Modem Support (PDF)
names are used in all TCP/IP environments and user can 8. Media Level Redundancy
specify host name instead of an IP address when using 9. Multiple Tag Generation
KEPServerEX v5. 10. OPC Quick Client
OPC AE (Events)
http://www.kepware.com/Products/kepserverex_features.asp 4/27/2015
KEPServerEX v5 OPC and Communications Server Features Page 2 of 2
Ability to manage device and application read requests. 1. Select a driver to create channel
Overrides client application read requests. 2. Specify the device or system to communicate with
3. Select the items or tags for your database
http://www.kepware.com/Products/kepserverex_features.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 1 of 23
Kepware has developed relationships with many hardware vendors to specify, develop,
test, and maintain our product to their standards. We call these our "Vendor Integrated
Protocols"; they are highlighted below with a "Vendor Endorsed" designation.
Select a Driver Suite, choose a specific driver and then click "Go to Overview" for details.
::Go to Overview::
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
U-CON
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 2 of 23
DNP3 Ethernet
DNP3 Serial
Custom Interface Driver - CID
IEC 61850 MMS
Modbus Ethernet
Modbus RTU Serial
Modbus ASCII
U-CON
Oil and Gas OPC Server Suite Supported Devices
ABB Totalflow
Bristol/IP
Enron Modbus
Fisher ROC Serial
Fisher ROC Plus
Custom Interface Driver - CID
Lufkin Modbus
Modbus Ethernet
Modbus RTU Serial
Modbus ASCII
Omni Flow Computer
U-CON
Weatherford 8500
Return to Top
ABB Totalflow
ABB Totalflow OPC Server Supported Devices Premium Driver
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 3 of 23
ControlLogix 5000
MicroLogix 1000
MicroLogix 1100
MicroLogix 1200
MicroLogix 1400
MicroLogix 1500
SLC 500 Fixed I/O
SLC 5/01
SLC 5/02
SLC 5/03
SLC 5/04
PLC-5 Family excluding the PLC5/250 series
Allen-Bradley Ethernet OPC Server
Supported Devices Standard Driver
Allen-Bradley Micro850
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 4 of 23
Allen-Bradley Micro810
Allen-Bradley Micro830
Allen-Bradley Micro850
Allen-Bradley Unsolicited Ethernet Supported Devices Standard Driver
Allen-Bradley PLCs programmed to send PLC-2 type commands. Devices need not be
PLC-2's. Consult your hardware programming manual.
Return to Top
Return to Top
FP0 C10
FP0 C14
FP0 C16
FP0 C32
FP0 T32
FP1 C14
FP1 C16
FP1 C24
FP1 C40
FP1 C56
FP1 C72
FP2
FP2SH
FP3
FP10SH
FPM C20R
FPM C20T
FPM C32T
Return to Top
H2 EBC or EBC-F
H4 EBC or EBC-F
Terminator I/O
GS1 Drive
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 5 of 23
GS2 Drive
DURAPULSE (GS3) Drive
Return to Top
DL-05
DL-06
DL-230
DL-240
DL-250
DL-260
DL-430
DL-440
DL-450
AutomationDirect DirectNET OPC
Supported Devices Standard Driver
Server
DL-05
DL-06
DL-230
DL-240
DL-250
DL-260
DL-330
DL-340
DL-350
DL-430
DL-440
DL-450
AutomationDirect K Sequence OPC
Supported Devices Standard Driver
Server
SG Series PLCs
SL Series PLCs
DL-05
DL-06
DL-105
DL-230
DL-240
DL-250
DL-260
DL-350
DL-430
DL-440
DL-450
AutomationDirect Productivity 3000
Supported Devices Standard Driver
Ethernet OPC Server
P3-550
Return to Top
This driver can be used successfully with devices that use the BACnet/IP (Annex J)
protocol, are visible on or from an Ethernet network, and support the objects,
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 6 of 23
properties, and services supported by this driver. You should consult the Protocol
Implementation Conformance Statement (PICS), available from your hardware
vendor.
Return to Top
E200-FB00
E201-8B00
E290-FB00
E151-FB00
E190-8B00
E250-FB00
E300-FB00
E191-CB00
M200-FB00
M290-FB00
M151-FB00
M190-8B00
M181-4B00
M250-8B00
M300-8B00
Return to Top
M-Cut
M-Drive
M-Rotary
M-Shuttle
M-Track
M-Traverse
M-Trim
ML-Drive
ML-Trim
Return to Top
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 7 of 23
Return to Top
All ISOLYNX SLX100 data acquisition systems that support the ISOLYNX protocol.
Return to Top
The DDE Client Driver is capable of communicating with any server that
supports standard "CF TEXT" DDE Data Format.
Return to Top
Any DNP3 slave device using the Distributed Network Protocol (DNP3)
Any DNP3 slave device using the Distributed Network Protocol (DNP3)
Return to Top
Enron Modbus
Enron Modbus OPC Server Supported Devices Premium Driver
Return to Top
ROC809
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 8 of 23
ROC827
ROC809L
ROC827L
Return to Top
GE Intelligent Platforms (GE Fanuc) OPC Server Suite - Vendor Endorsed Protocol
GE CCM OPC Server Supported Devices Standard Driver
9030-311
9030-313
9030-331
9030-341
9070-731
9070-732
9070-771
9070-772
9070-781
9070-782
Series Five
Series Six
9030-311
9030-313
9030-331
9030-341
9030-350
9030-360
9070-731
9070-732
9070-771
9070-772
9070-781
9070-782
GE OPEN
Horner OCS
Versamax Family
PACSystem RX3i
PACSystem RX7i
GE Ethernet Global Data (EGD)
Supported Devices Standard Driver
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 9 of 23
9030-311
9030-313
9030-331
9030-341
9030-350
9030-360
9070-731
9070-732
9070-771
9070-772
9070-781
9070-782
GE Micro
GE OPEN
9030-311
9030-313
9030-331
9030-341
9030-350
9030-360
9070-731
9070-732
9070-771
9070-772
9070-781
9070-782
GE Micro
GE OPEN
Return to Top
FANUC Series 0i
FANUC Series 15
FANUC Series 15i
FANUC Series 16
FANUC Series 16i
FANUC Series 18
FANUC Series 18i
FANUC Series 21
FANUC Series 21i
FANUC Series 30i
FANUC Series 31i
FANUC Series 32i
FANUC Power Mate i
Open Addressing
GE Focas HSSB OPC Server Supported Devices Standard Driver
FANUC Series 0i
FANUC Series 15
FANUC Series 15i
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 10 of 23
FANUC Series 16
FANUC Series 16i
FANUC Series 18
FANUC Series 18i
FANUC Series 21
FANUC Series 21i
FANUC Series 30i
FANUC Series 31i
FANUC Series 32i
FANUC Power Mate i
Open Addressing
Return to Top
Return to Top
HC Hybrid Controller
Micro1
Micro3
MicroSmart
OpenNet Controller
Fa2
Fa2j
Fa3s-cp11
Fa3s-cp12
Return to Top
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 11 of 23
Return to Top
Return to Top
Return to Top
53MC1000
53MC2000
53MC2002
53MC4000
53MC5000
Return to Top
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 12 of 23
A Series Ethernet
Q Series Ethernet
FX3U
Mitsubishi FX OPC Server
Supported Devices Standard Driver
FX
FX0
FX0N
FX2N
FX3U
Mitsubishi FX Net OPC Server
Supported Devices Standard Driver
FX
FX2C
FX0N
FX2N
Return to Top
Modbus ASCII
Flow Computers
Flow Automation
Modbus Ethernet OPC Server
Supported Devices Standard Driver
Modbus
TIO Module
Modbus Serial OPC Server
Supported Devices Standard Driver
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 13 of 23
Return to Top
Microsoft Access
Microsoft SQL
Oracle
Sybase
MySql
The ODBC Client Driver is capable of communicating with any application that
supports the standard "ODBC" data source format.
Required: MDAC - Microsoft Data Access Components (it consists of several core
components that provide various database technologies; including ODBC and its
drivers).
Return to Top
C200
C200H
C200HE
C200HE-Z
C200H-Z
C200HG
C200HG-Z
C200HS
C200HX
C200HX-Z
C500
C1000
C1000H
C2000
C2000H
CJ1G
CJ1H
CJ1M
CV500
CV1000
CV2000
CVM1-CPU01 v2
CVM1-CPU11 v2
CVM1-CPU21 v2
CS1
Omron FINS Serial OPC Server
Supported Devices Standard Driver
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 14 of 23
C200
C200H
C200HE
C200H-Z
C200HG
C200HG-Z
C200HS
C200HX
C200HX-Z
C500
C1000H
CJ1G
CJ1H
CJ1M
CS1G
CS1H
CV500
CV1000
CV2000
CVM1-CPU01
CVM1-CPU11
CVM1-CPU21
Omron Host Link OPC Server
Supported Devices Standard Driver
C20H
C200
C200H
C500
C1000
CQM1
QM1
OPEN
Omron NJ Ethernet OPC Server Supported Devices Standard Driver
E5AX-A
E5AX-AH
E5AX-DAA
E5AX-PRR
E5AX-VAA
E5AF-A
E5AF-AH
E5AJ-A
E5EJ-A
E5CN-PT
E5CN-TC
E5GN-PT
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 15 of 23
E5GN-TC
Omron Toolbus OPC Server Supported Devices Standard Driver
CJ1G-H
CJ1H-H
CJ1M
CJ1G
CS1G
CS1H
Return to Top
The OPC DA Client Driver provide an easy and reliable way to connect disparate 3rd
Party OPC DA Servers to your Client applications, including HMI, SCADA, Historian,
MES, ERP, and countless custom applications.
OPC UA Client Driver Standard Driver
Return to Top
OL4054
OL4058
OL2208
OL2211
OL2201
OL2108
OL2109
OL2111
OL2408
OL2418
OL2252
OL3406
OL3420
OL3440
OL3850
Return to Top
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 16 of 23
Return to Top
Philips P8
MC30 (using the CI30 card)
MC31
MC41
ISCOS 10
ISCOS 60
ISCOS 70
Philips PC20
Return to Top
SattCon 200
SC05-25SB
Any device that supports the application protocol "SattBus" and has the SattBus
Ethernet interface/module present will be supported.
SattBus Serial OPC Server Supported Devices Standard Driver
SattCon 05
SattCon 15
SattCon 31
SattCon 35
SattCon 200
Satt Control OP45
Return to Top
DSA3200
DTS3250
Return to Top
90U
95U
100U-100
100U-101
100U-103
101U
115U-941
115U-942
115U-943
115U-944
115U-945
135U-921
135U-922
135U-928
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 17 of 23
155U-946
155U-947
Siemens S5 (3964R) OPC Server Supported Devices Standard Driver
Any device that supports 3964 or 3964R protocol and uses the RK 512 computer link
program.
Siemens S7-200 OPC Server
Supported Devices Standard Driver
Siemens S7-212
Siemens S7-214
Siemens S7-215
Siemens S7-216
Siemens S7-224
Any Siemens S7-200
Siemens S7 MPI OPC Server
Supported Devices Standard Driver
Siemens S7-300
Siemens S7-400
Siemens TCP/IP Ethernet OPC
Supported Devices Standard Driver
Server
Siemens S7-200
Siemens S7-300
Siemens S7-400
Siemens S7-1200
Siemens S7-1500
Siemens TCP/IP Unsolicited OPC
Supported Devices Standard Driver
Server
Simulated S7-300
Return to Top
Simulation Suite
Advanced Simulator OPC Server Supported Devices Standard Driver
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 18 of 23
Microsoft Access
Microsoft SQL
Oracle
Sybase
MySQL
The Advanced Simulator Driver is capable of communicating with any application that
supports the standard "ODBC" data source format.
Required: MDAC - Microsoft Data Access Components (it consists of several core
components that provide various database technologies; including ODBC and its
drivers).
Memory Based OPC Server Supported Devices Standard Driver
The Memory Based Device Driver enables you to retain tag values between server
runs. When the driver's Item Persistence is activated, all D register addresses and
string values will be saved when the OPC server shuts down. The values are restored
the next time you open the project.
Return to Top
Master Open
Slave
SIXNET EtherTRAK I/O modules (firmware version 2.10 or later)
SIXNET RemoteTRAK I/O modules (firmware version 2.01 or later)
SIXNET RemoteTRAK I/O connected through an EtherTRAK I/O module. (Both the
RemoteTRAK and EtherTRAK must have firmware version 2.01 or later.)
SIXNET VersaTRAK RTUs (firmware version 2.12 or later)
SIXNET SIXTRAK gateways (firmware version 2.12 or later)
Return to Top
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 19 of 23
TSX 07
TSX 17
TSX 37
TSX 47
TSX 57
Small Frame
Large Frame
Return to Top
Return to Top
T2
T3
S2
S3
Toshiba Serial OPC Server Supported Devices Standard Driver
EX100
EX200
T1-16
T1-28
T1-40
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 20 of 23
T1 Super
T2
T3
T3H
Return to Top
Return to Top
Tricon
Trident
Return to Top
750-342
750-842
Return to Top
WellPilot RPOC
WellPilot/ePIC VSD
ePIC RPC
M2000
8800
8750
8500/8650
Return to Top
Return to Top
This driver can import tags defined in a Wonderware InTouch project. Devices are
dependent on the Wonderware InTouch application.
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 21 of 23
Return to Top
Return to Top
CX1006
CX1206
CX2010
CX2020
CX2210
CX2220
CX2410
CX2420
CX2610
CX2620
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 22 of 23
DA100-1
DA100-2
DR130
DR131
DR231
DR232
DR241
DR242
DC100-1
DC100-2
Yokogawa DX Ethernet OPC Server
Supported Devices Standard Driver
DX102
DX104
DX106
DX112
DX204
DX208
DX210
DX220
DX230
MV100
MV200
DX1002
DX1004
DX1006
DX1012
DX2004
DX2008
DX2010
DX2020
DX2030
DX2040
DX2048
Yokogawa DX Serial OPC Server
Supported Devices Standard Driver
AX100
DX102
DX104
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
OPC Driver List for KEPServerEX - over 150 Drivers Page 23 of 23
DX106
DX112
DX204
DX208
DX210
DX220
DX230
MV100
MV200
Yokogawa DXP OPC Server
Supported Devices Standard Driver
DXP100
DXP200
Yokogawa HR OPC Server Supported Devices Standard Driver
HR2400(10 Channels)
HR2400(20 Channels)
HR2400(30 Channels)
Yokogawa MW OPC Server Supported Devices Standard Driver
MW100
MX100
Return to Top
Return to Top
http://www.kepware.com/Products/products_OPCServers.asp 4/27/2015
DataLogger Plug-In for KEPServerEX OPC Server Page 1 of 1
• Support for any ODBC-compliant database • Runs as a Windows Service and Interactive User
management system • Scalability through support of multiple concurrent
• User-friendly installation and configuration logging processes (threads)
• Drag and drop support for adding OPC data items • Supports both automatic table creation and the
(tags) ability to append data to an existing table
• Support for dynamically created tags • Data is logged directly from the local item list, no
• Flexible triggering reliance on external OPC servers
• Deadband support for logged items • Error recovery: Auto reconnect if a DSN connection
• Support for an optional NumericID field for logged is lost
items • Optional automatic configuration backup (most
• Ability to use Start/Stop Snapshots without recent copy of configuration file is saved)
requiring that the Log on Static Interval or Log on
Data Change Trigger behaviors be enabled
• Contains a "_LogDataBit" system tag that allows
client applications to trigger DataLogger
• Support for the CSV Import/Export for logged items
• Support for store and forward, which prevents data
loss when the SQL server is unavailable
• Simulator Driver for simulating live data
• Two-hour demo for evaluation
http://www.kepware.com/Products/OPC_Data_Logger.asp 4/27/2015
Security Policies Plug-In OPC Server - KEPServerEX OPC Server Page 1 of 1
http://www.kepware.com/spec-sheets/security-policies-plugin.asp 4/27/2015
OPC Alarms and Events (OPC A&E) for KEPServerEX OPC Server Page 1 of 3
http://www.kepware.com/Spec_Sheets/alarms_and_events.asp 4/27/2015
OPC Alarms and Events (OPC A&E) for KEPServerEX OPC Server Page 2 of 3
• MULTI_LEVEL
The multilevel condition supports multiple sub-conditions. This condition is used if the source has multiple states of
interest and there is a need to know the transition between the condition states. For example, if you have a temperature
tag with multiple temperatures of interest, use this condition. The HIGH_HIGH sub-condition has the highest priority and
the LOW_LOW sub-condition has the lowest.
• ROC_HIGH, ROC_LOW
The Rate of Change (ROC) condition compares the source data to a static or dynamic ROC. For example, if you have a
source tag that represents production output and you want to trigger the condition if the output falls below 100 units a
minute, use this condition. Note: use ROC_HIGH for high priority conditions and ROC_LOW for low.
• DEV_HIGH, DEV_LOW
The Deviation conditions are used to monitor the deviation of the source data. The condition is triggered if the condition
of the source is outside the limits set. The limits can be either a percentage or a static value. For example if you have a
source that monitors power consumption and you want to trigger the condition if the power consumption is outside of
100W ±20%, use a deviation condition.
CSV Import/Export
Import and export tag data into a Comma Separated Variable (CSV) file. When using. CSV import and export, tags are created
quickly in the desired application.
Definitions:
An alarm is an abnormal condition and is thus a special case of a condition.
http://www.kepware.com/Spec_Sheets/alarms_and_events.asp 4/27/2015
OPC Alarms and Events (OPC A&E) for KEPServerEX OPC Server Page 3 of 3
A condition is a named state of the Event Server, or of one of its contained Items (if it is also an OPC Data Access Server), which
is of interest to its Client. An alarm is merely a special case of a condition, which is deemed to be abnormal and requiring special
attention.
An event is a detectable occurrence which is of significance to the Event Server, the device it represents, and it's OPC Clients. An
event may or may not be associated with a condition, such as set point changes, informational messages, logins and operator
requests.
An area is a grouping of plant equipment configured by the user, typically according to areas of operator responsibility.
Protocol
OPC AE v1.10
The Alarms and Events OPC Server is a plug-in device driver for KEPServerEX. A
"Plug-in" is a software program (.dll) that extends the capabilities of KEPServerEX
to fit the communication requirements of a specific device or system. The plug-in
driver handles all of the proprietary communications between the device/system
and the OPC layer, KEPServerEX. The KEPServerEX core then handles all OPC and
Proprietary Client communications between the plug-in driver and the Client
application. For a complete list of features and capabilities please visit the
KEPServerEX overview page.
http://www.kepware.com/Spec_Sheets/alarms_and_events.asp 4/27/2015
OPC Tunneling - Create an OPC Tunnel using the OPC UA Client Driver and OPC UA S... Page 1 of 3
Benefits Features
• Eliminate DCOM Configurations • OPC Tunneling for OPC DA 1.0, 2.05a and 3.0
http://www.kepware.com/Spec_Sheets/opc_UA.asp 4/27/2015
OPC Tunneling - Create an OPC Tunnel using the OPC UA Client Driver and OPC UA S... Page 2 of 3
Use Case 1: OPC UA Client and OPC UA Servers Use Case 2: OPC Tunneling
Aggregate Data from Multiple Remote Systems Remove the need for DCOM
Click to Enlarge
Click to Enlarge
The OPC UA Client Driver OPC Server is a plug-in device driver for KEPServerEX. A
"Plug-in" is a software program (.dll) that extends the capabilities of KEPServerEX
to fit the communication requirements of a specific device or system. The plug-in
driver handles all of the proprietary communications between the device/system
and the OPC layer, KEPServerEX. The KEPServerEX core then handles all OPC and
Proprietary Client communications between the plug-in driver and the Client
application. For a complete list of features and capabilities please visit the
KEPServerEX overview page.
http://www.kepware.com/Spec_Sheets/opc_UA.asp 4/27/2015
OPC Tunneling - Create an OPC Tunnel using the OPC UA Client Driver and OPC UA S... Page 3 of 3
http://www.kepware.com/Spec_Sheets/opc_UA.asp 4/27/2015
LinkMaster OPC Bridging Software - Server / Client Page 1 of 2
LinkMaster Features:
Diagrams:
http://www.kepware.com/Products/products_linkmaster.asp 4/27/2015
LinkMaster OPC Bridging Software - Server / Client Page 2 of 2
http://www.kepware.com/Products/products_linkmaster.asp 4/27/2015
Oracle Connectivity Suite for KEPServerEX OPC Server Page 1 of 2
• Connectivity to 1,000s of Devices Over 130 • Powerful Math - collect and aggregate plant floor
Protocols data into the key parameters forming the
• Data Aggregation foundation of your business analytics. Basic math
• Data Analytics operators, counters, timers, accumulators, etc,.
• Basic RDB Connectivity Advanced Tags in KEPServerEX will generate the
• Oracle MES Connectivity exact data you need for Oracle analytics.
• Oracle MOC Connectivity • Powerful Logic - Logic operators and data test
enable you to generate and store variables based
on times or conditions ensuring you have the exact
Plant Floor Communications parameters, collected under the exact
circumstances necessary for Oracle analytics.
• Standard Communications to thousands of devices
via over 130 protocols
Oracle Connectivity
http://www.kepware.com/Products/Oracle_Connectivity_Suite.asp 4/27/2015
Oracle Connectivity Suite for KEPServerEX OPC Server Page 2 of 2
• Custom Communications to virtually any simple • Oracle MES Connector - provides a direct interface
serial or Ethernet protocol through the use of the into Oracle's MES solution. No configuration
UCON (User Configurable) Device Driver. necessary other than the selection of variables to
• OPC Client Driver to enable data collection from any send.
third party OPC Servers. • Oracle MOC (Manufacturing Operations Center)
Connector - provides a direct interface into the
Oracle MOC solution. No configuration is necessary
Additional Information and Resources: other
Related than the selection of variables and the
Products:
selection of the MOC interface table.
• KEPServerEX Home • Manufacturing Suite
• KEPServerEX OPC Server Features • LinkMaster OPC Bridging Software
• Oracle Connectivity Suite Revision History • DataLogger Option for KEPServerEX
• Kepware Blog • Advanced Tag Option for KEPServerEX
• Whitepapers • RedundancyMaster OPC Redundancy Software
• Connecting Visual Basic to Oracle Connectivity Suite • Support and Maintenance Agreement
• System Requirements • Support and Maintenance Agreement Pricing
• OPC Compliancy Testing • Legacy Pricing Policy
• KEPServerEX v5 Licensing • Security Policies Plug-In
• Upgrade Pricing
The Oracle Connectivity Suite is a plug-in device driver for KEPServerEX. A "Plug-
in" is a software program (.dll) that extends the capabilities of KEPServerEX to fit
the communication requirements of a specific device or system. The plug-in driver
handles all of the proprietary communications between the device/system and the
OPC layer, KEPServerEX. The KEPServerEX core then handles all OPC and
Proprietary Client communications between the plug-in driver and the Client
application. For a complete list of features and capabilities please visit the
KEPServerEX overview page.
http://www.kepware.com/Products/Oracle_Connectivity_Suite.asp 4/27/2015
RedundancyMaster - OPC Redundancy Software Page 1 of 4
Ease of Use
RedundancyMaster can be a drop-in application that does not
require you to make any changes to your OPC client or
server applications. Its intuitive configuration takes only
minutes and will allow you to have a Redundant OPC system
running with no headaches. Simply browse and select your
primary and secondary OPC servers, and the system is up Single Point of Failure
and running. We have built in features such as email
notification, object and link monitoring, and diagnostics Two OPC Servers Paired with RedundancyMaster
logging. In the situation where you need multiple redundant As can be seen in the diagram below, the original OPC system
OPC server pairs that utilize the same OPC server vendor, we has been redesigned using two OPC servers instead of a single
have added the capability to alias* the ProgID (Program ID) OPC server. To facilitate the redundant operation of the OPC
of the OPC server. servers, each OPC client has been paired with
RedundancyMaster.
*Note: Aliasing may require minor OPC client modifications
Using the configurable options within RedundancyMaster, the
Reliability use of either the Primary or Secondary OPC server can be
There are a many variables that could impact the quality and controlled directly. Based on the modes selected,
reliability of your data and even more ways an OPC system RedundancyMaster will keep both servers active or if
can lose a connection to an OPC server. The most common configured to do so, start the secondary server only when the
are: primary server fails.
http://www.kepware.com/Products/RedundancyMaster.asp 4/27/2015
RedundancyMaster - OPC Redundancy Software Page 2 of 4
Connection Mode
The connection mode defines how and when the
redundancy application should connect to the underlying
primary and secondary servers. The mode in which you
operate affects the amount of time it takes to fail over
from one OPC server to the other. Some modes allow you
to automatically promote communications to the primary
when it is available. The following summarizes connection
modes:
http://www.kepware.com/Products/RedundancyMaster.asp 4/27/2015
RedundancyMaster - OPC Redundancy Software Page 3 of 4
http://www.kepware.com/Products/RedundancyMaster.asp 4/27/2015
RedundancyMaster - OPC Redundancy Software Page 4 of 4
http://www.kepware.com/Products/RedundancyMaster.asp 4/27/2015
ClientAce - OPC .NET Toolkit Page 1 of 3
Call to Purchase
The DA Junction control is a customized .NET control that The Channel Settings control provides functionality to view and
enables Visual Basic .NET and C# programmers to easily make certain changes to the properties of a channel and devices
develop OPC client applications that access any OPC UA, OPC within an OPC server provided by Kepware Technologies. The
DA, and XML DA servers. No detailed knowledge of OPC Data ability to write to System level tags must be enabled in the
Access interfaces is required. The DA Junction will perform the server.
connection handling procedure between your custom client
application and the OPC server, as well as monitor and
reconnect when necessary.
http://www.kepware.com/Products/OPC_ClientAce.asp 4/27/2015
ClientAce - OPC .NET Toolkit Page 2 of 3
Quick Links
http://www.kepware.com/Products/OPC_ClientAce.asp 4/27/2015
ClientAce - OPC .NET Toolkit Page 3 of 3
http://www.kepware.com/Products/OPC_ClientAce.asp 4/27/2015