Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

To,

The Electrical Inspector (Lift Mumbai)


I.E. & L. Dept.
Chembur,Mumbai.

Dear Sir,
Sub: - Lift Installation at-----------------------------------------------------------
---------------------------------------------------------------------------------
Ref: - 'A' Form No._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

This is to certify that equipment’s supplied & erected by our company are in accordance
with the following items mentioned below:

1. The Lift buffers confirms with IS 14665 (Part 4/Sec.1):2001


2. The Lift Guide Rails & Guide shoes confirms with IS 14665 (Part 4/Sec.4):2001
3. The Lift Car Frame, car gate/doors, roof of the complete enclosures & counterweight &
suspension confirms with IS 14665 (Part 4/Sec.3):2001
4. The Lift Safety Gears & Governors confirm IS 14665 (Part 4/Sec.4):2001
5. The Lift doors looking develops & contacts confirm IS 14665(Part 4/Sec.6):2001
6. The Lift Machine & Brakes confirm IS (Part 4/Sec.7):2001
7. The Lift wire ropes confirm IS 14665 (Part 4/Sec.8):2001
8. The Controller & Operating devices to lift confirm IS 14665(Part 4/Sec.9):2001
9. The Lift Retiring earn confirm IS (Part 4/Sec.5):2001
10. The Trailing cable confirm with the regulation at Bombay Fire Insurance Association &
B.S.S. 977
11. The Lift machine motor is earned by two separate earthing and earth resistance is _ _ _
_ _ _ _Ohms.
12. The fastening of the main suspension ropes are capable of sustaining a lead of not less
than 80% of ultimate strength of the undisturbed rope which is 522814500 Kg.
13. The equalizer & its fastening's. In its several parts & assembly have strength of more
than 10% in excess of the strength of the cable.
14. The speed governor is set to cause the application of the safety gear at a speed of not
more than 40% not less than 15% above the contract speed.
15. The loads on overhead beams & their supports & the factor of the safety have been
calculated in accordance with clause 20 (B)
16. The insulation resistance of the electrical parts of all operating devices is capable of
withstanding for a minute a pressure of 2000 volts A.C.
17. Lift Motor is manufactured as per Indian Standards.

You might also like