Professional Documents
Culture Documents
Qed422 23
Qed422 23
August 2005
QED422, QED423
Plastic Infrared Light Emitting Diode
Features Description
■ λ= 880 nm The QED422/423 is an 880 nm AlGaAs LED encapsulated in a
■ Chip material = AlGaAs clear, purple tinted, plastic TO-46 package.
■ Package type: Plastic TO-46
■ Matched Photosensor: QSD722/723/724
■ Medium Wide Emission Angle, 30°
■ High Output Power
■ Package material and color: clear, purple tinted, plastic
Package Dimensions
0.190 (4.83)
REFERENCE 0.178 (4.52)
SURFACE
0.220 (5.59)
0.030 (0.76)
NOM
0.800 (20.3)
MIN
0.050 (1.27)
CATHODE
0.100 (2.54)
NOM
Ø 0.215 (5.46)
NOM
R 0.022 (0.56)
ANODE
NOTES:
1. Dimensions for all drawings are in inches (mm). CATHODE
2. Tolerance of ± .010 (.25) on all non-nominal
dimensions unless otherwise specified.
Notes:
1. Derate power dissipation linearly 2.67 mW/°C above 25°C.
2. RMA flux is recommended.
3. Methanol or isopropyl alcohols are recommended as cleaning agents.
4. Soldering iron 1/16" (1.6 mm) minimum from housing
2 www.fairchildsemi.com
QED422, QED423 Rev. 1.0.0
QED422, QED423 Plastic Infrared Light Emitting Diode
Fig. 1 Normalized Radiant Intensity vs. Forward Current Fig. 2 Forward Voltage vs. Ambient Temperature
10 2.0
Ie - NORMALIZED RADIANT INTENSITY
Normalized to: IF = 50 mA
IF = 100 mA Pulsed
tpw = 100 µs
IF = 20 mA IF = 10 mA
0.1 1.0
0.001 0.0
1 10 100 1000 -40 -20 0 20 40 60 80 100
IF - FORWARD CURRENT (mA) TA - AMBIENT TEMPERATURE (°C)
0.9
100 90 80
0.8 110 70
120 60
0.7
130 50
0.6
140 40
0.5
150 30
0.4
0.3 160 20
0.2
170 10
0.1
180 0
775 800 825 850 875 900 925 950 1.0 0.8 0.6 0.4 0.2 0.0 0.2 0.4 0.6 0.8 1.0
λ(nm)
3 www.fairchildsemi.com
QED422, QED423 Rev. 1.0.0
QED422, QED423 Plastic Infrared Light Emitting Diode
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™ FAST ISOPLANAR™ PowerSaver™ SuperSOT™-8
ActiveArray™ FASTr™ LittleFET™ PowerTrench SyncFET™
Bottomless™ FPS™ MICROCOUPLER™ QFET TinyLogic
Build it Now™ FRFET™ MicroFET™ QS™ TINYOPTO™
CoolFET™ GlobalOptoisolator™ MicroPak™ QT Optoelectronics™ TruTranslation™
CROSSVOLT™ GTO™ MICROWIRE™ Quiet Series™ UHC™
DOME™ HiSeC™ MSX™ RapidConfigure™ UltraFET
EcoSPARK™ I2C™ MSXPro™ RapidConnect™ UniFET™
E2CMOS™ i-Lo™ OCX™ µSerDes™ VCX™
EnSigna™ ImpliedDisconnect™ OCXPro™ SILENT SWITCHER Wire™
FACT™ IntelliMAX™ OPTOLOGIC SMART START™
FACT Quiet Series™ OPTOPLANAR™ SPM™
PACMAN™ Stealth™
Across the board. Around the world.™
POP™ SuperFET™
The Power Franchise
Power247™ SuperSOT™-3
Programmable Active Droop™
PowerEdge™ SuperSOT™-6
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY
PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY
ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT
CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Advance Information Formative or This datasheet contains the design specifications for
In Design product development. Specifications may change in
any manner without notice.
No Identification Needed Full Production This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Rev. I16
4 www.fairchildsemi.com
QED422, QED423 Rev. 1.0.0