An incident occurred during the unloading of an iron pellet wagon at a steel plant. While the automated unloading system was operating, the tippling command was not executed and the robotic arm collided with the shuttle car that transports the pellets, pushing the robotic arm to its home position. The collision resulted in equipment property damage and halted operations at the warehouse terminal until concerns were addressed.
An incident occurred during the unloading of an iron pellet wagon at a steel plant. While the automated unloading system was operating, the tippling command was not executed and the robotic arm collided with the shuttle car that transports the pellets, pushing the robotic arm to its home position. The collision resulted in equipment property damage and halted operations at the warehouse terminal until concerns were addressed.
An incident occurred during the unloading of an iron pellet wagon at a steel plant. While the automated unloading system was operating, the tippling command was not executed and the robotic arm collided with the shuttle car that transports the pellets, pushing the robotic arm to its home position. The collision resulted in equipment property damage and halted operations at the warehouse terminal until concerns were addressed.
An incident occurred during the unloading of an iron pellet wagon at a steel plant. While the automated unloading system was operating, the tippling command was not executed and the robotic arm collided with the shuttle car that transports the pellets, pushing the robotic arm to its home position. The collision resulted in equipment property damage and halted operations at the warehouse terminal until concerns were addressed.
Incident No : IN00156389 On : 1/5/2023 12:00:00 AM At : WT-2 post tippling side.,WT-1,2,3,4 TH-
1&2 TT-1,2,3&4, New TT Category : Near Miss Consequence : Equipment Property Damage Current Status : Incident Title : During unloading of 27th nos wagon (Rake no-2523, Iron Pellet) in Automode with ROBOT and without WDA tippling command was not executed by the system. SAC operator took SAC in local mode and he was moving the SAC in FW direction and simultaneously ROBOT was moving towards SAC side as system was in Automode with ROBOT. Both ROBOT and SAC collided ,and SAC pushed ROBOT to the home position. Wt2 operation stopped and informed to the all concerned. Type of Incident : Property Damage Classification Equipment Property Damage Contractor responsible :