Professional Documents
Culture Documents
Cchd72 Carcamone HD Manual en
Cchd72 Carcamone HD Manual en
Cchd72 Carcamone HD Manual en
( )
Manual Download
as PDF
www.camonetec.com
CamOne, FlyCamOne, CarCamOne and the CarCamOne Logo are registered Trademarks of ACME the game company, Germany
© copyright 2013 by ACME the game company GmbH
Version: 2.0
Content of the box
Please make sure that the set is complete before starting
Do not remove the micro SD Card while recording or saving. Do not switch off or take out the
battery before the recording has been stopped or as long there is access to the memory,
indicated by a rotating circle.
Protect the unit from extreme temperatures. Stop recording at temperatures less than 0°C and
higher than 60°C. Remove the camera from the windshield/suction cup in case
extreme temperatures might be possible!
It is known that forged accumulators which remarkably look like the original product are
offered for the sale again and again.
Some of these rechargeable batteries are not equipped with a proper protection circuit which would
satisfy the regulations of the prevailing safety regulations. These accumulators can perhaps lead to
fires or explosions. We assume no liability for accidents, damages or failures which result from the
use of a forged accumulator.
Battery charging
The integrated battery is not fully charged when being purchased.
Please charge the battery before you are going to use the camera the first time!
Battery lock
Battery cover
4
Functional diagramm
On/Off switch
Power/Charging LED
Eyelet
10-Pin ComPort
Mini USB 2.0
Micro-SD-Card slot
Reset button
Fixing slots
Battery case
180° pivot able head
Lens
Due to limitations in the technology of the display production, single or few dark or light dots might
appear. This is not a defect and will not have any impact to the recorded video or photo!
5
Compatible memory cards
Only use Micro-SDHC-Cards rank „Class4“ or higher.
The camera can be used with cards up to 32GB.
The recommended cards are „FCO Rapid Rush” cards
at a minimum size of 8GB.
The panel
Zoom in
Zoom out
Up
Start / Stop / OK
Left / 3 seconds for full screen
Right / 3 seconds to flip the picture 180°
Menu / 3 seconds for setup
down
The buttons placed at the right side of the camera will guide you through the functions of the
camera - „Left” and „Right” as well as the button „M” do have a double key mapping.
Press those for 3 seconds to get the second command.
6
Permanent recording inside a car
First clean the window carefully from inside to avoid dirt and crudity on the windshield. Now pull
off the protective film from the suction cup and moisten the slightly rubberized surface. Press
the suction cup on the windshield and pull the lever down. Make sure that there are not too large
temperature differences between the external environment, the internal temperature of the car
and the wheel, since the suction cup cannot be mounted otherwise.
Now insert the micro SD card. Push together the fixation brackets of the suction cup
and put on the camera following the notches.
Adjust the camera by moving the suction cup arm. Then plug in the car cable.
By starting the engine, the camera launches automatically and the integrated LED flashes green.
After stopping the engine, rotating bars appear and the recording will be finished.
The CarCamOne records in 15 Minutes blocks. If the remaining memory for the next recording
is not sufficient, the first recording will be deleted automatically. This causes a minimal gap of 3
seconds between the videos.
Make sure that the camera does not reduce your reactivity in dangerous situations!
Don’t let the device distract you! Don’t use the camera while driving!
If your car has a power saving function (automatic Start- Stop), it is necessary to close the
jumper (bridge) inside the car adaptor.
Twist off the plugs lock nut, remove the metal ring and pull off the sticker. The half casings can
be opened now.
To close the jumper, open the adaptor first. On the PCB you will find the
jumper covering one pin only - the default setting to detect the generator.
Remove the Jumper and easily put it on both pins to activate the
start of the camera by „ignition” once served with power.
The box uses the same fixture as the cam and is made
of high- quality acryl. It´s possible to adjust the cameras
head before inserting. For usage in combination with the
CarcamOne-cable the marked area has to be reamed.
7
Usage as a regular camera
A Flip 180°
Changing the direction of the head requires to flip the
picture by 180°. Press the „right” button for 3 seconds
A to adjust the direction according to your requirements.
Can’t be changed once the recording has been started.
Full screen
The camera is not displaying the full frame as
recorded. This setting allows focusing to the center.
A A
To get the full screen press „left” for 3 seconds.
On-screen icons
[1] At the top on the right, the tripartite battery status is indicated. If this status is marked red,
the internal battery needs to be charged! [2] The box besides it shows the activated timestamp.
[3] Next to the „A” for automatic exposure the chosen preset is displayed here. [4] The red spot
indicates the recording. [5] Leftmost you can check the selected mode. The camera symbol for
photo mode (followed by a „S“ for serial pictures) – the video camera for video mode (followed
by an „E“ for external mode). [6] Below the capacity is indicated in form of a bargraph. Red is
the used memory, green shows the remaining capacity.
Mode selection
The camera starts in external mode that can be used directly for recording.
Use the cross pad’s „up“and „down“buttons to change the mode.
Mode Select the mode with the cross pads up and down, confirming by
External pressing “Start”. For details in the selected mode go further on
Video pressing the “M“ button.
Photo
Play
8
Following menus appear:
Video recording
When switching on the camera you can start
recording immediately pressing the „Start”
Release button. To stop press the button again.
button
„START” Never remove the SD card or battery when
the cam is recording or still operating -
displayed by a rotating circle!
Photo shooting
Use the cross pad to get to the photo mode. Press the release button once to make a single
shot. To activate the serial photo function, press „M” to select the sequence.
Confirm you selection by pressing the “Start” button again. With next press of “Start” the cam
starts the serial photo mode, taking photos for instance every 5 seconds.
Playback at the TV
Connect the included RCA-cable to you TV and set it to „AV”
9
Setup
Press the „M“-button for 3 seconds to enter the setup.
The setup shows up the installed firmware version.
By using the keypanel, you can switch through the menu and choose the modes by pressing the
Record/OK- button.
Please note that some menu items may not appear before a firmware-/software update.
Check „SoftwareUpdate (Firmware Update)“.
10
Playback at the computer (MS Windows)
The videos can be displayed at the PC in an easy way.
11
Different type of mount
The line-Up of the FlyCamOne HD contains different type of fixing systems
Tripod adaptor
The tripod adaptor fixes the camera to every standard
tripod. (Art.-Nr.: FCHD25)
Pendulum mount
The pendulum mount can be screwed or glued to a RC
model - it enables the pan movement by a servo. The
pendulum function can be locked - but is mandatory when
fixed to a sport kite (Kite Surfing). This time the mount is
fixed by straps.
(Art.-Nr.: FCHD26)
Belt mount
Fix the camera to your belt or jacket using the belt clip
furthermore with some tape almost anywhere.
(Art.-Nr.: FCHD29)
Universal mount
The mount for the wrist is fixing the screen, but can be
adjusted to the cam as well to use it as a universal fixing,
also for a helmet.
(Art.-Nr.: FCHD30)
Exchangeable lenses
Fast replaceable lenses for the right field of view. Attention:
The 96° and 133° lenses are not suitable for the DiveBox
use!
(Art.-Nr.: FCHD49 - 96°, FCHD09 - 133°, FCHD10 - 170°)
Docking station
For battery charging, data transfer on the PC or mounting
the camera on the dashboard of your car.
(Art.-Nr.: FCHD13)
12
Connecting the optional screen
The optional 2,5” screen will be plugged into the cam
directly. Different mounts allow fixing it individually. At
the wrist when the camera is mounted at the helmet,
inside the car, at the handle bar of a bike.
(Art.-Nr.: FCHD02)
13
Firmware update
To make the best out of your camera, make sure your firmware is up to date, which is displayed
by pressing the M button for several seconds.
Compare your firmware version with the currently listed version on our website.
Website: www.CamOneTec.com
When needed, the most recent firmware version can be downloaded here.
To update the camera software (firmware update), copy the needed file from our website in the
root of your memory card.
Go to the main camera menu (Setup) and select the step „Update”.
The update process takes about 1 minute. The status is indicated on the display.
Do not switch off the camera while updating!
Make sure that the battery is fully charged
Technical data
Power: 5V (USB / 10Pin Port) / 3,7V (LiPo-battery, 600mAh)
Consumption: 320mAh
Size: 95 x 52 x 21mm
Weight: 53g incl. battery
Battery: 3,7V 600mAh LiPo
Format: MPeg
Sensor: 5MPix CMOS
Lens: 55° (exchangeable)
Zoom: 4times digital
Screen: 1“ / 2,54mm OLED
Microphone: yes
AV-Out: yes
USB: Hi-Speed USB (2.0)
Operation temperature: 0°C to 60°C
Humidity 10% to 80% (non-condensing)
Micro SD/SDHC-Card: Micro SD <= 32GB – Class 4 or higher
14
Troubleshooting
Please note: the camera will record when the engine runs only.
Key position “Ignition” will start the camera only when the red jumper inside the
adaptor has been removed!
The Video jerks when The card, the USB connection or Download the file to the PC
playing at the PC. the PC is too slow first. Stop other applications.
Date and time will not be Wrong Settings Change Settings in the Setup
displayed in a correct way
Display shows „Error“ The camera cannot get space – Download the file to the PC
too many small files. first. Format the SD-Card.
Display shows „Memory“ No more free memory left. Download the file to the PC
first. Format the SD-Card.
The camera stops recording Your car has power saving Close the red jumper inside
at every traffic light or when system and stops the engine. the CarCamOne-cable adaptor.
stopping the car.
The camera stops during normal Your car has power saving Close the red jumper inside the
drive and starts after 10, 15 system and stops the generator CarCamOne-cable adaptor.
minutes again. when cars battery is charged.
Please note that permanent improvements of the firmware cause adjustments on this manual.
On our website www.CamOneTec.com the latest version is available. Please pay attention on
the version.
15
CarCamOne HD Accessories
Please note: CarCamOne HD shares accessories of the FlyCamOne HD 720p marked with „720”
Docking station!
Compatible
Art-No.: EAN Item Camera
FCHD02 4260033049520 FlyCamOne HD Screen 2,5”; 150cm cable 720 & 1080
CCHD02 4260033049544 FlyCamOne HD / CarCamOne HD cable; 12-24V 720 & 1080
FCHD16 4260033049667 FCHD Rapid Rush 16GB Micro SD-card 720 & 1080
FCHD32 4260033049827 FCHD Rapid Rush 32GB Micro SD-card 720 & 1080
FCHD07 4260033049575 FlyCamOne HD PIR Tube with 120cm cable 720 & 1080
FCHD09 4260033049599 FlyCamOne HD Lens 133° 720 & 1080
FCHD10 4260033049605 FlyCamOne HD Lens 170° 720 & 1080
FCHD15 4260033049650 FlyCamOne HD GPS modul 720 & 1080
FCHD17 4260033049674 FlyCamOne HD LiPo-battery; 3,7V 600mAh 720
FCHD59 4260033047595 FlyCamOne HD Cable 120cm 720 & 1080
FCHD24 4260033049742 FlyCamOne HD Cable 200cm 720 & 1080
FCHD25 4260033049759 FlyCamOne HD Tripod mount 720 & 1080
FCHD03 4260033049537 FlyCamOne HD Transmission set 5.8GHz 720 & 1080
FCHD05 4260033049551 FlyCamOne HD RX cable 720 & 1080
FCHD06 4260033049568 FlyCamOne HD Battery; Li-Ion 900mAh 1080
FCHD08 4260033049582 FlyCamOne HD V-Eyes set; incl. 2,4GHz remote 720 & 1080
FCHD11 4260033049612 FlyCamOne HD 1080p myopia lens set 720 & 1080
FCHD12 4260033049629 FlyCamOne HD V-Eyes base 720 & 1080
FCHD13 4260033049636 FlyCamOne HD Docking station 720
FCHD14 4260033049643 FlyCamOne HD Remote 1080
FCHD21 4260033049711 FlyCamOne HD AV cable 720 & 1080
FCHD22 4260033049728 FlyCamOne HD Screen cable 720 & 1080
FCHD23 4260033049735 FlyCamOne HD 5.8GHz adapter cable 720 & 1080
FCHD26 4260033049766 FlyCamOne HD Pendulum mount (planes and kites) 720 & 1080
FCHD64 4260033047649 FlyCamOne HD Handle bar mount 720 & 1080
FCHD28 4260033049790 FlyCamOne HD Suction cup 720 & 1080
FCHD29 4260033049797 FlyCamOne HD Belt clip 720 & 1080
FCHD30 4260033049803 FlyCamOne HD Wrist mount (screen) spare 720 & 1080
FCHD31 4260033049810 FlyCamOne HD DiveBox (up to 20m depth) 720
FCHD33 4260033049834 FlyCamOne HD Sportster headset 720 & 1080
FCHD37 4260033049865 FlyCamOne HD Neoprene wristband for screen 720 & 1080
FC3104 4260033048721 5.8GHz Shield antenna + 500m 720 & 1080
16
Space for your notes
17
Safety advice
Read the manual before using the product.
! When a battery is incorrectly replaced, there is danger of explosion. Replace the battery only
by a battery that is recommended by the manufacturer of the same or equivalent type. Dispose
used batteries according to the manufacturer’s instructions- Risk of fire, explosions and burns.
Do not disassemble the battery. Do not heat the batteries above the following temperatures or
incinerate them.
This product contains a LiPo battery. Dispose this batteries at a designated collection
place only.
We hereby declare that this model meets the essential requirements and other relevant
provisions of Directive 2004/108/EC. A copy of the Declaration of Conformity can be
obtained from the address (p. 19).
18
Service & Support
Boikweg 24
33129 Delbrück
Germany
E-Mail: service@camonetec.com
http://www.camonetec.com
http://www.camonetec.com/service
CamOne, FlyCamOne, CarCamOne and the CarCamOne Logo are registered Trademarks of ACME the game company, Germany
© copyright 2013 by ACME the game company GmbH
19
CamOneTec.com