Professional Documents
Culture Documents
SX100
SX100
200-Watt 12-Inch
Two-Way Portable
Speaker System
• High efficiency/High output
• Ring-Mode Decoupling (RMD™)
• Pure titanium compression driver
• 65° x 65° coverage
• Molded in rigging points
• Available in white or black
• Stand mountable
with an unusually durable Thiele-Small- ough knowledge of the techniques and cure construction of horizontal arrays, using
aligned vented enclosure. The result is clear regulations of rigging objects overhead. Mb200’s to support the enclosure.
and articulate, high-quality sound. Electro-Voice strongly recommends that
Power-Handling Capacity
the Sx100+ be suspended taking into ac-
Frequency Response
count all current national, federal, state To our knowledge, Electro-Voice was the
The combination of a 12-inch woofer, wide- and local regulations. It is the responsibil- first U.S. manufacturer to develop and pub-
bandwidth high-frequency driver and an ity of the installer to ensure the Sx100+ is lish a power test closely related to real-life
equalized crossover results in the wide and safely installed in accordance with all such conditions. First, we use a random-noise in-
smooth overall response shown in Figure 1. regulations. If the Sx100+ is suspended, put signal because it contains many frequen-
This response was measured at 10 feet, us- Electro-Voice strongly recommends that the cies simultaneously, just like real voice or
ing a 4-volt input in an anechoic chamber, system be inspected at least once a year. If instrument program. Second, our signal con-
and was measured using a swept sine-wave any sign of weakness or damage is detected, tains more energy at extremely high and low
input. No external equalization was used. remedial action should be taken immedi- frequencies than typical actual program, add-
Figure 1 has been averaged and corrected ately. ing an extra measure of reliability. Third, the
for 1 watt at 1 meter. A manual entitled Suspending System 200TM test signal includes not only the overall
Loudspeakers is included with every Sx100+ “long-term average” or “continuous” level—
Constant-Directivity Speaker System system. It gives a summary of the suspen- which our ears interpret as loudness—but
The crossover frequency and speaker com- sion kits available and an idea of how each also short-duration peaks which are many
ponent geometries have been selected so that kit is used. A brief overview, which illus- times higher than the average, just like ac-
the directional characteristics of the woofer trates some approaches for single and mul- tual program. The long-term average level
and constant-directivity horn match at the tiple suspension, is given here for the ben- stresses the speaker thermally (heat). The in-
crossover frequency to create a special sys- efit of the system designer. Please refer to stantaneous peaks test mechanical reliabil-
tem type—the constant-directivity system. individual suspension kit engineering data ity (cone and diaphragm excursion). Note
Response within the 65° rated coverage angle sheets for full details and safety information. that the sine-wave test signals sometimes
is uniform, which means dependable audi- The first approach is to suspend an indi- used have a much less demanding peak value
ence coverage without “hot spots” or dead vidual Sx100+ enclosure. The four metric relative to their average level. In actual use,
zones at certain frequencies. The 65° disper- M8 x 1.25 inserts (see Figures 5 and 6) long-term average levels exist from several
sion characteristic also helps avoid early re- which are built into the enclosure allow seconds on up, but we apply the long-term
flections from nearby floor or side-wall sur- the system to be suspended using eyebolts average for several hours, adding another
faces which could degrade performance. The (Mb100 Eyebolt Attachment Kit). Typi- extra measure of reliability.
controlled directivity of the high- and low- cally it will be necessary to attach two cables Specifically, the Sx100+ is designed to
frequency transducers also eliminates re- to the top eyebolt and “pull up” on the rear. withstand the power test described in the
sponse irregularities caused by diffraction off The Mb200 bracket (see Figure 7) encom- ANSI/EIA RS-426-A 1980. The EIA test
nearby enclosure edges and, in combination passes the top and bottom of the enclosure spectrum is applied for eight hours. To ob-
with an essentially flat on-axis frequency re- and has additional features to make suspend- tain the spectrum, the output of a white-noise
sponse, produces a total acoustic power out- ing the Sx100+ easier and more flexible. generator (white noise is a particular type
put that is uniform with frequency. Electro-Voice recommends the use of the of random noise with equal energy per band-
Mb200 in all but the simplest situations. The width in Hz) is fed to a shaping filter with
Directivity Mb200 has supplementary holes to allow the 6-dB-per-octave slopes below 40 Hz and
Sx100+ to be attached to a wall or ceiling above 318 Hz. When measured with the
A unique feature of the Sx100+ is the con-
and aimed at an audience. usual constant-percentage bandwidth ana-
stant-directivity dispersion provided by the
The Mb200 Installation Kit also allows the lyzer (one-third-octave), this shaping fil-
65° x 65° horn. The polar response of the
use of OmniMount® Series 100 mounting ter produces a spectrum whose 3-dB-down
system at selected one-third-octave band-
hardware by providing three-hole-pattern points are at 100 Hz and 1,200 Hz with a
widths is shown in Figure 2. These polar re-
groups compatible with these support sys- 3-dB-per-octave slope above 1,200 Hz.
sponses were measured in an anechoic envi-
tems. When OmniMount® Series 100 mount- This shaped signal is sent to the power ampli-
ronment at 10 feet using one-third-octave
ing hardware is specified, the Mb200 Instal- fier with the continuous power set at 200 watts
pink-noise inputs. The frequencies selected
lation Kit must first be attached to the speaker into the 7.1-ohm EIA equivalent impedance
are fully representative of the polar response
enclosure. (37.6 volts true rms). Amplifier clipping sets
of the system. Beamwidth of the system uti-
The second approach is to suspend multiple instantaneous peaks at 6 dB above the con-
lizing the complete one-third-octave polar
Sx100+ enclosures. The Sx100+ enclosure tinuous power, or 800 watts peak (75.3 volts
data is shown in Figure 3. Rθ and directivity
is not designed to suspend multiple enclo- peak). This procedure provides a rigorous
index (Di) are plotted in Figure 4.
2
Sx100+ 200-Watt Two-Way Portable Speaker System
test of both thermal and mechanical failure controller. The loudspeaker shall meet the fol- the product by anyone other than Electro-
modes. lowing performance criteria: frequency re- Voice or any of its authorized service repre-
sponse of 80 to 25,000 Hz, –3 dB; power sentatives. Obtaining Warranty Service:
Amplifier Power Recommendations handling of 200 watts long term and 800 watts To obtain warranty service, a customer must
As noted in the Power-Handling Capac- short term, with a shaped random-noise in- deliver the product, prepaid, to Electro-Voice
3
Sx100+
Sx100+
200-Watt
200-Watt
Two-Way
Two-Way
Portable
Portable
Speaker
Speaker
System
System
4
Sx100+
Sx100+
200-Watt
200-Watt
Two-Way
Two-Way
Portable
Portable
Speaker
Speaker
System
System
190 mm
(7.5 in.)
429 mm
(16.9 in.)
76 mm
(3.0 in.)
341 mm
(13.4 in.)
190 mm
(7.5 in.) 65.0°
312 mm
(12.3 in.)
5
Sx100+ 200-Watt Two-Way Portable Speaker System
_____________________
1. Available through OmniMount Systems, Inc. OmniMount®
is a registered trademark of OmniMount Systems, Inc.