Professional Documents
Culture Documents
Operating Manual of 20 30 50BW BSL2021 2022.6.10
Operating Manual of 20 30 50BW BSL2021 2022.6.10
Operating Manual of 20 30 50BW BSL2021 2022.6.10
for DC-GP-20/30/50BW
Laser Marking Machine
with BSL 2022
1. Power On / Off
1.1 Power on
* Connect machine to AC 220V power supply with ground.
* Check emergency stop, if not pressed need clockwise rotate to release.
* Clockwise rotate key switch, then powered on.
Key Switch
1 /
17
* Counterclockwise rotate key switch to disconnect power
* Unplug
Note: Must be in order!
Don’t unplug directly, will easy to cause damage to the screen
2. Operations
2.1 Editing of file
* Import of LOGO file, Click on “vector”, find the file, select and click “confirm”.
2 /
17
* Size modification, If too large, click “zoom-” below
3 /
17
* Click X or Y to modify size ( recommended to modify Y)
4 /
17
* Click “area“, check LOGO showing well or not.
* Directly click “edit” to modify. If there is no text, click “text” on right side to add.
5 /
17
(Note: Add a space to separate words that needs to be added later)
Space
6 /
17
space
7 /
17
space
8 /
17
Suitable for
requesting
modification
9 /
17
* If need Timer Jump Code, click " Shift", set parameters and click “confirm”.
10 /
17
* Edit Font
Click “font” on the right, showing “font preview”, one is single line, another is TTF fonts
(TTF fonts can be filled). Select a suitable one.
* Click "apply all" on the right after modified, to make.all contents.fonts.be same.
11 /
17
* Move Content, Click content, adjust “step” parameter, click four arrows (up and down,
left and right) to move. (step: unit of every move, larger value, faster movement)
* Filled in words, Click “sel-all” or select content to be filled individually, click “Fill” to
showing Fill Setting page.
12 /
17
* Choose "Fill Enable", “space” is generally 0.1, “Angle” is 90 degrees, click OK
* Document saving, Click “Save” above, give file a name and click.”confirm”.
13 /
17
File name
Blue arrow is the direction line, Click “flow line” below: select “left to right”
14 /
17
* Focal length adjustment, Normal field lens is 210-150, distance from product surface
to bottom of black lens around 220mm, adjust up and down slightly, to make best effect.
* Marking position
Click "red light", red indication box will appear on product, which is where laser marking.
15 /
17
If marking position is not on product, adjust in two ways below.
* Adjust by mechanical (front/rear and up/down);
* Adjust upper/lower position of document in software, check red box indicated on
product or not.
3. Login
* Technician Password Login
Login password: 1111111
Permissions: operate "mode", "pipeline", "encoder", "pen number", "other"
Note:Not required Login for regular operations, don’t change relevant settings.
16 /
17
Please contact us if you have any questions.
17 /
17