Professional Documents
Culture Documents
Rebooting
Rebooting
Rebooting
01932 340384
Home
Vacancies
Peugeot BSi reboot
How to find
us
procedure
directions
and maps
Peugeot BSi reboot procedure
Contact
information Some of you will have already come across a strange problem when programming
keys on 2002 onwards Bsi equipped Peugeot. This usually presents
Servicing itself as a complete instrument cluster failure after the keys have
been programmed when the customer comes to collect the car.
MoT BSI Unit
The BSI unit is basically a computer which
Tyres handles a multitude of functions such as
odometer value, central locking, lights and
Tyre Laws immobiliser. Some later Bsi units are liable
to corrupt their own software program if
not “woken up” in a specific way after
Air programming keys or battery disconnection.
conditioning The details of this are explored
thoroughly in a Peugeot TSB but I will
Exhausts summarise for you briefly.
Procedure for Initialising the BSI after key learning
Brakes 1. Disconnect the diagnostic tool.
2. Put the driver’s window down, lift the bonnet and ensure all
Clutches equipment is switched off.
3. Ensure all doors are closed and remove key from the
Tuning ignition.
4. Wait for 3 minutes, disconnect the vehicle battery and wait
15 seconds.
24 hour 5. Reconnect the vehicle battery, wait a further 10 seconds (do
breakdown not open doors.)
recovery 6. Switch on the side lights through the driver's window.
7. Switch on the ignition and check system’s functionality.
Photos 8. Hold lock button on key down for 10 seconds.
9.remove key open & close door test central locking system
Diagnostics 10. Start the engine and complete the system’s check.
Failure to follow this procedure could result in incorrect operation of many
Links BSI related items.
It did take three attempts following this procedure before it worked.
Cars for
sale
1 of 2 11/11/2022, 4:15 AM
Peugeot BSi reboot procedure https://www.petercoopercarrepairs.co.uk/peugeot_bsi_reboot_procedu...
The BSi must be allowed to go to SLEEP ie into "power save mode". Do not operate
any equipment on the vehicle during this time. Remember, even opening the
bonnet will wake the BSi on a vehicle fitted with alarm.
If the battery is under the bonnet, open the bonnet first and leave it up. 807
batteries can be dis-connected through the drivers window, remove floor cover
first.
ALWAYS disconnect any DIAG equipment and do not operate any plips from other
vehicles during the 3 minute waiting period.
Home
PROCEDURE FOR BATTERY RECONNECTION
Unless otherwise instructed by Peugeot or Product Service, you must always carry
Trade out the following procedure, often referred to as a "soft re-boot", to minimise the
possibility of the BSi corrupting its own software when reconnecting the vehicles
battery supply.
Ensure the procedure for battery disconnection has been adhered to and
importantly all BSi functions were switched off with the drivers window left down.
NOTE: Upon reconnection, if any vehicle function controlled by the BSi i.e . interior
light is switched on,the internal operation of the BSi has the potential to spike or
corrupt its configuration and software program......
Back to diagnostics
2 of 2 11/11/2022, 4:15 AM