Professional Documents
Culture Documents
A Technical Report Jerry
A Technical Report Jerry
ON
HELD AT:
PREPARED BY
SUBMITTED TO:
DEPARTMENT OF GEOLOGICAL TECHNOLOGY, SCHOOL OF ENGINEERING
TECHNOLOGY
MARCH, 2019
ABSTRACT
This report covers broadly the various aspects of my practical engagement during my
industrial training at. The theoretical knowledge obtained in my institution of learning served
as the basis that I related with practically.
CERTIFICATION
This is to certify that this report was carried out by BADEJO ADEMOLA JERRY with
MATRIC NUMBER (GE201700318), department of Geological Technology, the Federal
Polytechnic Ede, Osun State, at OLAFOLA NIGERIA ENTERPRISES within the stipulated
period in the collaboration with the school “The Federal Polytechnic Ede” and Industrial
Training Fund [ITF] from august 2018 to December 2018
____________________ _____________________
Students Name Signature & Date
____________________ _____________________
Supervisor Name Signature & Date
____________________ _____________________
HOD Geological Technology Signature & Date
The Federal Polytechnic, Ede.
DEDICATION
This report is dedicated to Almighty Allah, the giver of knowledge, wisdom, understanding,
mercy and grace. It is also dedicated to my parent MR and MRS BADEJO for their support
throughout the industrial training.
ACKNOWLEDGMENT
My appreciation goes to almighty god for his mercy and grace upon me for given me
the opportunity and successful to partake in the industrial training from the beginning to the
end.
Also my big thanks goes to my wonderful parent MR and MRS BADEJO whom have
been actor and actress in my life since all these years and for their morally, financially
support on me. May God continue to bless and may you eat the fruit of your labour
(AMEEN).
Finally to my wonderful H.O.D MR JOHN UGWOKE and all my lecturers may God
continue to bless and be with you all (AMEEN).
TABLE OF CONTENT
TITLE PAGE
ABSTRACT I
CERTIFICATION II
DEDICATION III
ACKNOWLEDGMENT IV
CHAPTER ONE
1.0 INTRODUCTION 1
1.1 AIM AND OBJECTIVES 1
1.1.0 AIM 1
1.1.1 OBJECTIVES 1
1.2 HISTORICAL BACKGROUND OF THE FIRM 2
1.3 ORGANOGRAM OF THE SECTOR 3
CHAPTER TWO
2.0 MOISTURE CONTENT TEST 4
2.1.0 LIQUID LIMIT DETERMINATION 4
2.1.1 APPARATUS 4
2.1.2 PROCEDURE 4
2.2.0 PLASTIC LIMIT DETERMINATION 6
2.2.1 APPARATUS 6
2.2.2 PROCEDURE 6
2.3.0 SHRINKAGE LIMIT 7
2.3.1 APPARATUS 7
2.3.2 PROCEDURE 7
2.4.0 SIEVE ANALYSIS DETERMINATION 8
2.4.1 APPARATUS 8
2.4.2 PROCEDURE 8
2.5.0 IN-SITU DENSITY USING SOUND BOTTLE REPLACEMENT METHOD 9
2.5.1 APPARATUS 10
2.5.2 PROCEDURE 10
2.6.0 AGGREGATE CRUSHING VALUE 10
2.6.1 APPARATUS 11
2.6.2 PROCEDURE 11
2.7.0 TRIAL MIX DESIGN 12
2.7.1 APPARATUS 12
2.7.2 PROCEDURE 12
2.8.0 CALIFORNIA BEARING RATIO 14
2.8.1 APPARATUS 14
2.8.2 PROCEDURE 14
2.9.0 CHALLENGES FACED 15
CHAPTER THREE