The document describes a 7-step water filtration process. Muddy water is poured into a container to allow sediments to settle. Then, it passes through multiple filtration layers including pebbles, coarse and fine dirt, and a filter paper. Next, chlorine disinfects the filtered water to kill any remaining bacteria. Finally, the clean drinking water is collected after 10-15 minutes. The purpose is to filter out impurities and provide clean drinking water through physical and chemical purification processes. However, water filters cannot remove all micrometer-sized impurities, so additional disinfection methods are needed.
The document describes a 7-step water filtration process. Muddy water is poured into a container to allow sediments to settle. Then, it passes through multiple filtration layers including pebbles, coarse and fine dirt, and a filter paper. Next, chlorine disinfects the filtered water to kill any remaining bacteria. Finally, the clean drinking water is collected after 10-15 minutes. The purpose is to filter out impurities and provide clean drinking water through physical and chemical purification processes. However, water filters cannot remove all micrometer-sized impurities, so additional disinfection methods are needed.
The document describes a 7-step water filtration process. Muddy water is poured into a container to allow sediments to settle. Then, it passes through multiple filtration layers including pebbles, coarse and fine dirt, and a filter paper. Next, chlorine disinfects the filtered water to kill any remaining bacteria. Finally, the clean drinking water is collected after 10-15 minutes. The purpose is to filter out impurities and provide clean drinking water through physical and chemical purification processes. However, water filters cannot remove all micrometer-sized impurities, so additional disinfection methods are needed.
container for about 15-30 minutes at most.It results in the sediments and particles settling at the bottom. 2. Water is then transferred to the filter. 3 . Upon reaching the beaker it goes through a layer of pebbles or gravel where larger particles can not go through. 4.Followed by coarse dirt and fine dirt which further XXX it. 5.The final layer then consists of filter paper where it is filtered and goes through the small pores through the cotton.Into another container. 6.After passing through the filter it enters a container where a substance of Chlorine disinfects it and kills off any remaining bacteria. 7.It is Stirred to make and left for about 10- 15 minutes for Clean drinking water. Hypothesis
Water filters works at a certain level but can
not get rid of all the impurities which are sized at micrometer(0.001 Millimeter)so you need various disinfection methods like:
Chlorination, ultraviolet (UV) radiation,
Ozonation and other alkanes and alkali.
Purpose:
Water filtering is a method used to filter out
undesired chemical compounds, organic and inorganic materials, and biological contaminants from water. The purpose of water filtration is to provide clean drinking water to every individual household. Purpose: The purpose of this project is to filter and clean muddy and dirty water using a fine physical barrier, a chemical process, or a biological process.These processes usually have microscopic holes that remove and filter out undesired chemical compounds, organic and inorganic materials, and biological contaminants from water.The smaller the holes, the less it allows to pass through and the cleaner the water is.The purpose of water filtration is to provide clean drinking water.It prevents water- related illnesses and diseases. Infants, elderly adults, and people with poor immune systems who are more highly susceptible to experiencing adverse effects due to contaminated water. transon two goes through a layer of rocks an bthe water filter then the water will be clearer after filtration because materials like charcoal, dirt and carbon will clean the water and remove the dirt.
Water filters would work at a certain level
but can not get rid of all the impurities which are sized at micrometer(0.001 Millimeter)so you need various disinfection methods like:
Chlorination, ultraviolet (UV) radiation,
Ozonation and other alkanes and alkali.
Purpose:
Water filtering is a method used to filter out
undesired chemical compounds, organic and inorganic materials, and biological contaminants from water. The purpose of water filtration is to provide clean drinking water to every individual household. It takes Water purification takes place on small and large scales, and water filtering can provide clean and potable water for industrial applications, in addition to individual households.
The filtration process reduces the concentration of contaminants
such as: suspended particles, parasites, bacteria, algae, viruses, and fungi. Proced ure Purpo se Hypoth esis