Professional Documents
Culture Documents
Ardex P 51 - GB
Ardex P 51 - GB
Type:
Solvent-free, blue synthetic resin dispersion, that signifi-
cantly prevents the penetration of water after drying.
Substrate:
Substrate must be dry, firm and free of dust and release
agents.
Working:
Pour ARDEX P 51 Bonding and Priming Dispersion into a
clean vessel and mix with the volume of water specified
by the mixing ratio.
Apply undercoat evenly with a broom, brush or roller and
allow to dry to a clear thin film, before beginning with the
subsequent work.
Substrate Undercoat Dilution To be observed:
ARDEX P 51/
ARDEX P 52 : For the application on old substrates it is to be ensured,
Water that the filling compounds and adhesive residues are
Smooth and dense substrates, ARDEX P 51 1:½ waterproof, are adequately capable of bearing the future
such as prefabricated concrete ARDEX P 52 loads and bond well to the substrate. Allow film of under-
floors, especially compacted ce- ARDEX P 4 1:½
mentscreeds, toughened calci- ARDEX P 82 coat to dry overnight. Water-soluble filling compounds and
um sulfatescreeds, Terrazzo, - adhesive residues (e.g. containing sulfite lye) are to be
sandstone, tile- and slab sur-
faces, old substrates with removed completely.
bonded filler compounds and
adhesive residues, when using With adhesive residues based on polyurethane, epoxy
filler compounds and thin bed
mortars resin and bitumen, ARDEX P 82 is to be used as adhesion
bridge.
Bare concrete floors and ARDEX P 51 1:1
ceilings ARDEX P 52
ARDEX P 4 1:1
Note:
Cement screeds, porous, ARDEX P 51 1:3 Product contains: 5-Chlor-2-methyl-isothiazolin-3-on and
strongly absorbent, between ARDEX P 52 2-Methyl-isothiazolin-3-on (3 : 1). May cause allergic
filler- and smoothing 1:3
compounds reactions
Calcium sulfate screeds and ARDEX P 51 1:3 GISCODE: D1
Calcium sulfate flow screeds, ARDEX P 52
absorbent and sanded 1:3 Marking according to
GHS/CLP: none
Smooth concrete walls and ARDEX P 51 1:3
ceilings for gypsum-bonded ARDEX P 52 Marking
filler compounds 1:3
after ADR: none
Gypsum wall building panels ARDEX P 51 1:3
and gypsum plaster for wall Packaging: Canister with 5 kg and 25 kg net
filling compounds or cement- Bottles with 1 kg net,
based thin bed mortar
Storage: Can be stored frost-free for approx. 12
Woodchip panels for tiled ARDEX P 51 undiluted
surfaces with highly flexible thin ARDEX P 52 months in original sealed container.
bed mortar ARDEX P 82 undiluted Store standing up.
-
We provide a warranty for the perfect quality of our products. .Our processing recommenda-
tions are based on trials and practical experience; however they can only be regarded as
general information without assurance of properties, as we have no influence on the building
site conditions and the execution of the work. Country-specific rules that are based on
regional standards, building regulations, processing or industrial guidelines may lead to
specific processing recommendations.
15.02.2018/GN/GB