Professional Documents
Culture Documents
NA To Sls en 1993-1-2 2018
NA To Sls en 1993-1-2 2018
NA to SLS EN 1993-1-2:2018
Gr. 2
© SLSI 2018
All right reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm, without permission in writing from the SLSI.
The preparation of this National Annexe was entrusted by the Working Group on
Formulation of National Annexes to Eurocode 3 - Design of Steel Structures, appointed by
the Sectoral Committee on Building & Construction Materials, upon which the following
members were represented:
Introduction
This National Annexe was approved by the Sectoral Committee on Building and Construction
Materials and was authorized for publication as a Sri Lanka National Annexe by the Council of
the Sri Lanka Standards Institution on 2018-04 -26.
In the preparation of this standard the assistance derived from the publications of the European
Committee for Standardization (CEN) and British Standards Institution (BSI) are gratefully
acknowledged.
NA.1 Scope
• 2.3 (1)
• 2.3 (2)
• 4.1(2)
• 4.2.3.6 (1)
• 4.2.4 (2)
NA.2.1 General
The decisions for the Nationally Determined Parameters described in
SLS EN 1993-1-2:2016 are given in clauses NA.2.2 to NA.2.6.
NA.2.2 Partial factor for the fire situation - Mechanical properties, M,fi
[SLS EN 1993-1-2:2016, 2.3(1)]
Use recommended values.
NA.2.3 Partial factor for the fire situation - Thermal properties, M,fi
[SLS EN 1993-1-2:2016, 2.3(2)]
Use recommended value.
NA.2.6 Table 4.1- default values for critical temperatures [SLS EN 1993-1-2:2016,
4.2.4(2)]
The critical temperatures given in Table NA.1 should be used.