Professional Documents
Culture Documents
1 Nov, David 9 Penabur 7
1 Nov, David 9 Penabur 7
1. An ammeter and an 18 Ω resistor are connected in series with a battery. The reading on the
ammeter is 0.50A. The resistance of the battery and the ammeter can be ignored.
3. A student investigates a circuit that contains two parallel resistors. The circuit includes meters R, S
and T which are all connected correctly.
4. The diagram shows a circuit containing three lamps and three switches S1, S2 and S3.
Lamp 1 and lamp 3 are lit, but lamp 2 is not lit. Which switch or switches is/are closed?
A S1 only
B S1 and S2
C S1 and S3
D S2 and S3
6. The diagram shows a 10Ω resistor and a 20Ω resistor connected in a potential divider circuit.
7. The circuit diagram shows a 4.0Ω resistor and an 8.0Ω resistor connected to a 6.0V battery.
8. A student has wires of different lengths and different diameters. The wires are all made of the
same metal. The student measures the resistance of one wire. Which wire has a greater resistance
than the wire he has measured?
A a shorter wire with a larger diameter
B a shorter wire with the same diameter
C a wire of the same length with a larger diameter
D a wire of the same length with a smaller diameter
A charge of 4.0C flows through the lamp in 2.0s. What is the direction of the electron flow in the
lamp and what is the current in the lamp?
10. The circuit shows a 2.0Ω resistor and a 1.0Ω resistor connected to a 12V battery.
12. A voltmeter and an ammeter are used to measure the resistance of a resistor. Which diagram
shows the voltmeter and the ammeter correctly connected?
Structure Question
1. In the circuit shown below
a. Mark the direction of conventional current
b. Mark the direction of electron flow
2. A current of 0.55 A flows through a small immersion heater for 1 minute and 20 second.
Calculate the total number of charge transferred. (e= 1,6 x 10-19 C)