2 Color Scrub Cap With Ponytail - PDF Pattern - My Hall Closet

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 11

TWO COLOR SCRUB CAP WITH PONYTAIL

NO BUTTONHOLES – NO ELASTIC

www.myhallcloset.com email: nath@myhallcloset.com


BEFORE YOU GET STARTED
Before printing, check your printer settings. Print the pattern to “ACTUAL SIZE”
NOT “Fit to Page”.
To save ink you can also select “GRAYSCALE” instead of printing in color.

SUPPLY LIST
• MAIN FABRIC – 1/3 YARD 42-45” WIDE
100% COTTON
• SECOND COLOR – ¼ YARD 42-45” WIDE
100% COTTON
• THREAD TO MATCH
• BUTTONS FOR MASKS (OPTIONAL)
• SCISSORS FOR FABRIC
• SCISSORS FOR PAPER
• PINS, SAFETY PIN
• TAPE

This pattern does not need elastic or buttonholes.

Before cutting - wash your fabric in hot water to pre-shrink. Press the fabric.

¼” seam allowance is included in the pattern. To make the cap smaller, use ½” seams.
***NOTE*** if you do that make sure you adjust the Band Top and Band Bottom
appropriately.

Be sure and check out my other Scrub Cap videos on my YouTube Channel -
https://www.youtube.com/user/mywithallmyart

www.myhallcloset.com email: nath@myhallcloset.com


.
CROWN

Note: This pattern is for YOUR personal instruction use only. YOU CAN make caps using my
pattern and YOU CAN sell the actual hats that YOU make and YOU CAN donate the caps.

Pattern is NOT for resale in any way. You are not granted permission to share in any way online or
otherwise, in whole or in part for free or for sale. Do not to rewrite the instructions and sell them
as though they belong to you. I trust that you won’t do that. If you do, that is called Intellectual
Property Rights Infringement and is illegal.

DO NOT SELL THE PATTERN. God Bless You!!!!


1
CUTTING INSTRUCTIONS

Match the double marks and


Download and print Cut out. Leave about ½” heavy lines. Tape the pattern
pattern to “Actual Size” at the bottom of #1 together.

Fold fabric over 17 ½” on cross grain. On the extra fabric, fold over Cut a tiny notch in the center
Not edge to edge. Cut along the outer so you can cut the Crown on of the top of the Crown and
edges. Mark the dot in the dip. the fold. Mark the dot at the at the fold on the back of #1.
bottom of the crown These will be matched during
stitching.

Cut a tiny notch in the center Fold the second color in half Cut the Band Top and the
of the fold on the front & and cut the tie on the fold. Band Bottom on the fold.
back of the Front Band.

www.myhallcloset.com email: nath@myhallcloset.com


2
STITCHING INSTRUCTIONS

Mark the seam opening on Use a Marks-B-Gone or a Cut a tiny notch in the center
the Band Top – both sides. light pencil mark of the fold on both edges of
the Band Top and Band
Bottom.

With right sides together, Leave an opening between the On both sides of the seam,
stitch the Band Top to the marks. Be sure to back stitch top stitch 1/8” from the
Band Bottom. at the beginning and the end seam line.
of each row of stitching

This is how it looks on the Match the dot at the bottom of the Pin all around. (Image is
wrong side. Crown with the dot in the dip. different because I
Match the notch at top of the borrowed it from another
crown to the back of the Front pattern.
Band.

www.myhallcloset.com email: nath@myhallcloset.com


3

Using a ¼” seam, start at the Ease around the crown. You Serge or zigzag around the
dot in the dip, stitch and back can stretch the bottom fabric a edge.
stitch at the beginning. Then little bit as you go. Stitch to the
stitch around the crown. dot in the dip. Back stitch.

Starting at the straight edge Match the notches at the top Wrong side of Front Band (leaves)
at the bottom, stitch using a of the wrong side of Front to the right side of the Band Top
¼” seam. Stitch all the way to Band (leaves) to the notch at (orange). *** The opening in the
the dot in the dip. Serge or the center of the right side of orange band needs to be away
zigzag edges. the Band Top (orange). from this seam.*** (See photo #2
on page 4)

Note the seam of the orange Pin all around. Using ¼” seam, stitch all the
Band. It goes against the way around.
wrong side of the leaves
fabric.

www.myhallcloset.com email: nath@myhallcloset.com


4

Fold the orange band in half Pin in place, close to the fold. Fold edge of the orange Band
all the way around. ***Note the Band opening under ¼”. Pin in place, close
for the tie is on the outside to the edge.
of the cap.***

Top stitched. Note the opening for the tie is


Top stitch close to the edge. on the top (arrow).
Be careful. Go slow, if you
need to.

Press the tie fabric in half Stitch across ends and along Pin a large safety pin to one
lengthwise. Press the edges the edge, close to the edge. end of the tie.
in to meet at the center.

www.myhallcloset.com email: nath@myhallcloset.com


5

Thread the tie into the hole Adjust the tie through the Smooth everything out.
in the Band Bottom, around until it is evenly distributed. Position the middle of the tie
the bottom of the ponytail to the center seam at the
part and out the other side. bottom of the ponytail part.
Pin in place.

Stitch the tie in place at the Add buttons CONGRATULATIONS!!! YOU


bottom center. Stitch and DID IT!!! I AM PROUD OF
back stitch several times. YOU.

Note: This pattern is for YOUR personal instruction use only. YOU CAN make caps using my
pattern and YOU CAN sell the actual hats that YOU make, and YOU CAN donate the caps.

Pattern is NOT for resale in any way. You are not granted permission to share in any way online or
otherwise, in whole or in part for free or for sale. Do not to rewrite the instructions and sell them
as though they belong to you. I trust that you won’t do that. If you do, that is called Intellectual
Property Rights Infringement and is illegal.

DO NOT SELL THE PATTERN. God Bless You!!!!

www.myhallcloset.com email: nath@myhallcloset.com

You might also like