Professional Documents
Culture Documents
2835smd 240leds 10mm Specification
2835smd 240leds 10mm Specification
Note: LEDYI may change product specifications and installation guidance without prior notice.
2835SMD 240LEDs LED STRIP
Very good color reproduction with CRI>90. “One Bin Only” within 3 MacAdam
25 2.1 4.2
10
5000
Red/black wire L=150mm, 18AWG Unit:mm
R min =50mm
Product Specification
TM-30-15
CCT Lumen Efficacy CRI R9
(K) (lm/m) (lm/w) Rf Rg
(Fidelity) (Gamut)
Bining
ONE
BIN
ONLY
Today and tomorrow
IP20: bare, max. light output and the best color consistency, indoor use.
IP52: Silicone coating, ~5% less output and 3rd best color consistency, indoor use, for damp environments.
IP65: Silicon tube / Heat shrink tube / Extrusion tube / U milky tube + clear cover, ~3% less output and 2nd
best color consistency, Indoor use or semi-outdoor use, for raining environments.
IP67: Silicone tube + silicon filling , ~7% less output and 4th best color consistency, outdoor use, max length
is 10 meters.
IP67E: Solid silicone extrusion, ~7% less output and 4th best color consistency, outdoor use, max length up
to 50 meters.
IP68: PU(Polyurethane),~7% less output and 4th best color consistency, under the water, within 2 meters deep.
1215.00lx
306.75lx
241.9
485.9
728.8 137.56lx
969.8
1211.7
76.69lx
1211.7
969.8
728.8
49.44lx
485.9
241.9
35.64lx
Beam Angle:113.60°
Sticker
CAUTION
THIS BAG CONTAINTS
MOISTURE AND ELECTROSTATIC
SENSITIVE DEVICES
Attention
1. Storage Temperature: -40°C~80°C,
Operating Temperature: -25°C~60°C.
2. Installation surface must be smooth, clean and dry.
3. The part of LED components can not be fixed on the surface of the sharp edge.
4. Strip should not be collided or crushed.
5. Strip can be cut following the cutting lines.
6. The LED strips, must not exceed 5 meters, when used in the DC series circuit.
RoHS