Professional Documents
Culture Documents
Fabrication of A Single Unit Screw Retained Implant
Fabrication of A Single Unit Screw Retained Implant
of a single unit screw
retained implant provisional
restoration
Ibrahim Duqum DDS, MS
Assistant Professor
University of North
Carolina at Chapel Hill
Laboratory exercise
• Fabrication of a single unit screw retained
provisional restoration using the Zimmer
implant system and the Zimmer Temporary
abutment
Abutment seated
(large portions of prep may be done on or off of the
model)
Mark for vertical / occlusal reduction
Initial cuts for reduction
Scoring for retention
Prepped abutment on cast
Lubricate very well and block
undercuts
Remove retaining screw
Fill voids & shorten screw
Adjusting, trimming and contouring
Initial contouring
Try Provisional on cast
Finishing of contoured provisional
Polishing of Provisional
Try provisional on cast after finishing
Polished and completed provisional
Clinical Example
• Single Screw retained implant provisional for a
maxillary right lateral incisor using the Astra
Tech implant system and the Astra Tech
Titanium temporary abutment
Tooth # 7 with a vertical root fracture
Single Edentulous space after tooth
extraction
Endosseous implant to replace tooth # 7
Diagnostic Wax Up
Temporary Abutments seated intra‐orally
Temporary abutment Prepared
Thermoplastic Index Fabricated from Wax
up seated intra‐orally to fabricate
provisional restoration
Screw retained provisional made using
Bis‐acryl provisional material
Completed Provisional
Thank You