Professional Documents
Culture Documents
What's The Difference Between Parallel Flow, Counter Flow and Crossflow Heat Exchangers
What's The Difference Between Parallel Flow, Counter Flow and Crossflow Heat Exchangers
Request a Quote
One of the most critical factors in the efficiency and effectiveness of a shell and tube heat exchanger is flow pattern.
https://www.enerquip.com/whats-the-difference-between-parallel-flow-counter-flow-and-crossflow-heat-exchangers/ 1/7
12/13/22, 5:00 PM What's the difference between parallel flow, counter flow and crossflow heat exchangers?
A tube in pipe exchanger can have either a parallel or counter flow pattern.
One of the most critical factors in the efficiency and effectiveness of a shell and tube heat exchanger is flow pattern. Flow pattern refers to the
direction that the tubeside fluid runs in relation to the shellside fluid. There are several distinct patterns engineers can choose from:
Parallel flow.
Counter flow.
Cross flow.
https://www.enerquip.com/whats-the-difference-between-parallel-flow-counter-flow-and-crossflow-heat-exchangers/ 2/7
12/13/22, 5:00 PM What's the difference between parallel flow, counter flow and crossflow heat exchangers?
But while each is unique and has its own pros and cons, there are many times when a combination of multiple flow patterns is beneficial, or even
necessary. Here’s what you need to know about these three flow patterns for shell and tube heat exchangers:
A parallel flow pattern, also referred to as a cocurrent flow, is one in which the shellside and tubeside fluids flow in the same direction. This is widely
seen in double-pipe heat exchangers and can be replicated in shell and tube heat exchangers as well, according to Bright Hub Engineering.
“The dramatic temperature difference at the inlet can cause thermal stress in parallel flow heat exchangers.”
The inlet temperatures of the two fluids may be significantly different, but by the conclusion of the process they’re relatively the same temperature.
With parallel flow, the wall temperatures throughout the exchanger will be more uniform than with other flow patterns, Thermopedia noted. When the
goal is to wind up with two fluids that have a relatively insignificant temperature gap, a parallel flow shell and tube heat exchanger may be the ideal
solution, Engineers Edge explained. When there is a notable temperature gap, the cold-fluid temperature will always be colder than the hot-fluid
temperature, Marine Notes pointed out.
It’s important to note that because the heat exchange rate isn’t as high as other flow patterns, parallel flow heat exchangers need greater heat transfer
surface area. As such, it’s critical that facility executives ensure they have the available floor space for their parallel flow shell and tube heat
exchangers, as they may be larger than another exchanger with a different flow rate.
Additionally, the dramatic temperature difference at the inlet can cause thermal stress, which may result in vibrations that lead to equipment damage.
A counter flow or countercurrent shell and tube heat exchanger’s construction is in many ways identical to that of a parallel flow shell and tube heat
exchanger. The main difference is that the tubeside fluid enters the exchanger at the opposite end of the shellside fluid. This results in the two fluids
running against each other rather than in the same direction.
“The counter flow pattern in shell and tube heat exchangers is the most efficient.”
The counter flow pattern is the most common in shell and tube heat exchangers, primarily because it’s the most efficient. This flow pattern allows for
the greatest temperature change between fluids. Additionally, unlike in parallel flow exchangers, the cold-fluid can reach the hottest temperature of
the hot-fluid since it exits at the end where the hot-fluid enters.
The temperature difference in counter flow configurations is more uniform throughout the entire exchanger, which reduces thermal stress that can
lead to shaking or motions that can become damaging to the equipment. Further, since the temperature difference is more consistent, the heat
exchange rate is also more consistent throughout the exchanger.
It’s easiest to achieve “true” counter flow, in which both fluids travel perfectly parallel to one another in opposite directions, in double-pipe heat
exchangers, although shell and tube heat exchangers can get remarkably close. The baffles typically included in construction causes the shellside fluid
to travel up and down within the shell as well as from the front to back (or vice versa), which lends to a somewhat cross flow pattern. The bigger the
length-to-diameter ratio of the exchanger, the closer to “true” counter flow the exchanger will experience, Bright Hub Engineering pointed out.
A crossflow heat exchanger is designed so that the two fluids flow perpendicular to one another. This is typically utilized when one fluid is a liquid and
the other is a gas, as in a car radiator in which hot water flowing left and right is cooled by air moving up or down, Bright Hub Engineering explained.
https://www.enerquip.com/whats-the-difference-between-parallel-flow-counter-flow-and-crossflow-heat-exchangers/ 3/7
12/13/22, 5:00 PM What's the difference between parallel flow, counter flow and crossflow heat exchangers?
Crossflow exchangers are also common in steam condensers, in which a liquid transforms into a gas by the end of the process.
In practice, shell and tube heat exchangers are highly complex pieces of equipment, which are integrated into complicated processes. As such, many
heat exchangers utilize a combination of multiple flow patterns to accommodate limits related to:
A common combination is counter flow and cross flow, as seen in many multipass shell and tube heat exchangers. As the tubeside fluid flows back and
forth between the two bonnets, the shellside fluid runs up and down, guided by baffles installed at regular intervals throughout the equipment. One
advantage of this is maximizing the heat transfer rate while also minimizing the floorspace taken up by the exchanger.
When you’re looking to either add or replace a shell and tube heat exchanger in your operation, it’s important to understand the significance of
different flow patterns. The engineers at Enerquip are experts at determining the most beneficial flow pattern for various processes. Reach out to
them to get advice, discuss a project or request a quote.
Contact Us Today!
Email *
Company
https://www.enerquip.com/whats-the-difference-between-parallel-flow-counter-flow-and-crossflow-heat-exchangers/ 4/7
12/13/22, 5:00 PM What's the difference between parallel flow, counter flow and crossflow heat exchangers?
Phone
Message
I would like to receive future marketing updates from Enerquip Thermal Solutions
Captcha *
Submit
Recent Posts
Thermal Fluid Heaters from Enerquip [Videos]
By Topic
About Us
https://www.enerquip.com/whats-the-difference-between-parallel-flow-counter-flow-and-crossflow-heat-exchangers/ 5/7
12/13/22, 5:00 PM What's the difference between parallel flow, counter flow and crossflow heat exchangers?
Asphalt
Cannabis
Chemical
Dairy
Equipment Design
Heat Exchangers
Industrial
Industrial Heating
News
Pharmaceutical
Project Management
Refining
Renewable Energy
Sanitary
Tank Heating
Videos
Solutions
https://www.enerquip.com/whats-the-difference-between-parallel-flow-counter-flow-and-crossflow-heat-exchangers/ 6/7
12/13/22, 5:00 PM What's the difference between parallel flow, counter flow and crossflow heat exchangers?
Vapor Condensers
Industrial Heaters
Custom Fabrication
Company Links
Our Process
About Us
Industries
Blog
Catalog
Sitemap
Terms of Service
Privacy Policy
Contact Information
© Copyright 2022 Enerquip Thermal Solutions | Site created by Thomas Marketing Services
https://www.enerquip.com/whats-the-difference-between-parallel-flow-counter-flow-and-crossflow-heat-exchangers/ 7/7