Professional Documents
Culture Documents
DR Rana
DR Rana
DR Rana
QUALIFICATION DESCRIPTION:
1|Page
Bhopal Professor 2006 10 AGP:6000
2|Page
Characterization of Basalt
based hybrid fiber
reinforced polymer
composite
3|Page
13. Study of Mechanical and tribological Anuj Singh Baghel 2015
properties of ADC-12, SiC reinforced
composites with and without heat
treatment.
4|Page
26. Mechanical properties analysis of waste Siddarthpatel 2016
activated carbon from water filter
cartridge composite with LM24
aluminium alloy.
27. Synthesis and Characterization of Sinkadar Yadav 2016
mechanical properties of low cost
environmental friendly epoxy.
28. Characterization of Mechanical ViveksinghTakur 2016
properties of Epoxy-Kevlar Fiber and
Milled Carbon reinforced Hybrid
Composites.
29 Development and analysis of high Shubham Mishra 2017
density polyethylene nano SiO2 and
wood powder reinforced polymer matrix
hybrid composite.
30 Analysis of mechanical properties of Vinay Kumar 2017
high density polyethylene, fly ash and
carbon nanotube reinforced hybrid
composite.
31 Synthesis and characterization of K.P. Yadav 2017
mechanical properties of composite
material high density polyethelne and
activated carbon.
32 Synthesis and analysis of mechanical Girdhrilalyadav 2017
and tribological behavior of
al5083/nano sic particulate composite
for engineering application.
33 Development and analysis of epoxy/ AnshulRawat 2017
nano sic and kevlar fiber reinforced
hybrid nano composite.
34 Tribological behavior and mechanical Ashish Kumar 2017
properties analysis of dual phase
AISI1015 steel for engineering
applications.
35 Synthesis and dry sliding behaviour of Ashish Kumar Singh 2017
LM24-TiB₂ reinforced particulate
composite subjected to T6 heat
treatment.
36 Development and testing of epoxy Gyatriprasad 2017
matrix, reinforced with nanoSiO2
andkevlar fiber hybrid.
37 Effect of TiC particles on the Utkarsh Pandey 2017
mechanical properties and
microstructure of aluminium alloy metal
matrix composites (MMCs).
5|Page
38 Optimization of milling parameters of Atul Shukla 2017
aluminium alloy B4C composites using
TOPSIS method.
39 Heat treatment of aluminum alloy Sanjay singh 2017
composites
6|Page
53 Analysis of mechanical properties and Aman Kumar 2019
microsture properties of Al 7075
Al2O3/Gr hybrid composites for different
sectors.
Publications:
I. International Journals: No 105
2022
Ashish Kumar 1, Ravindra Singh Rana 1, Rajesh Purohit 1, Kuldeep K. Saxena 2,*, Jinyang Xu 3,* and Vinayak Malik
4,5 “ Metallographic Study and Sliding Wear Optimization of Nano Si3N4 Reinforced High-Strength Al Metal
Matrix Composites” Lubricants 2022, 10, 202. https://doi.org/10.3390/lubricants10090202 page 1-24
Ashish Kumar Singh, Sanjay Soni, Ravindra Singh Rana, “Sliding wear response of ultrasonic-assisted
stir-squeeze cast Al-Zn(-Mg) alloy/ZrO2p composite: Wear mechanism and subsurface deformation.”
Surface Topography: Metrology and Properties, (2022). [IOP Publishing, SCIE, Q2, IF 2.038]
Ashish Kumar Singh, Sanjay Soni, Ravindra Singh Rana, “Mechanical and sliding wear behavior of
stir-squeeze cast and T6 heat-treated AA7068-ZrO2p composite.” Composite Interfaces[Taylor &
Francis, SCIE, Q2, IF 2.952] [Accepted on 04 May 2022]
Ashish Kumar Singh, Sanjay Soni, Ravindra Singh Rana, “Wear mechanism maps for stir-squeeze cast
AA7068 alloy/ZrO2p composite in accordance with normal load versus sliding speed diagram.”
Transactions of Indian Institute of Metals [Springer, SCIE, Q2, IF 1.499][Accepted on 03 June 2022]
Ashish Kumar, R.S. Rana, Rajesh, Purohit “Microstructure Evolution, Mechanical Properties, and
Fractography of AA7068/ Si3N4 Nanocomposite Fabricated thorough ultrasonic-assisted Stir Casting.
Material research express IOP SCIE Published 2022
Ashish Kumar, R.S. Rana, Rajesh Purohit, “Investigation of wear and friction characteristic of Al/
(Si3N4)npNano Composites under As-cast and Heat-treated conditions”. Journal of Process Mechanical
Engineering:Part E SAGE, SCIE Accepted, 2022
Ashish Kumar, R.S. Rana, Rajesh purohit Modeling of dry conditioned sliding wear and friction behavior
of Heat-treated Silicon nitride strengthened Al metal matrix nanocomposites., Indian journal of Engineering
and material science, CSIR-NISCAIR, SCI
Ashish Kumar, Ravindra Singh Rana, Rajesh Purohit, Kuldeep K Saxena, Atul kumar, Anurag Namdev
“Optimization of dry sliding wear behavior of Si3N4 and graphite reinforced Al-Zn-Mg-Cu
composites using Taguchi method, Journal of Materials Research and Technology, SCIE, Accepted
8|Page
2021:
Ashish Kumar Singh , Sanjay Soni, and Ravindra Singh Rana “Microstructure evolution, mechanical
behavior, and fracture analysis of ultrasonic-assisted stirsqueeze cast high strength
AA7068/ZrO2p/Grp composite under thermal aging” Taylor and Francis, PARTICULATE SCIENCE
AND TECHNOLOGY https://doi.org/10.1080/02726351.2021.1958398 pp 1-21, Q2 ISSN 02726351
Jayahari Lade, Kalluri Nagachary, Kuldeep K. Saxena, Kaliappan seeniappan & Ravindra Singh Rana
“Mechanical Characterisation and Study of Nickel Based super alloy 718 at Subzero Temperatures”,
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES Accepted 06 Jun 2021, Published
online: 20 Jul 2021 pp 1-16 Q3, ISSN 2374068X
Ashish Kumar, Ravindra Singh Rana & Rajesh Purohit “Tribological Analysis and Characterization of
Zinc Rich Al/Si3N4 Composites Fabricated Via Ultrasonic Assisted Stir Casting Technique”
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES
https://doi.org/10.1080/2374068X.2021.1959111Accepted 14 July 2021 pp 1-14 Q3 2374068X
Bipin Kumar and R. S. RanaAssessment of Low and High-Speed Impact Resistant Behavior of Basalt Fiber
Based Hybrid Polymer Composites for Defence and Automotive Applications: A Review AJ Journal
2020:
Ashish Kumar Singh1, *, Sanjay Soni 2
, R. S. Rana3 “A Critical Review on Synthesis of Aluminium
Metallic Composites through Stir Casting: Challenges and Opportunities” Advanced Engineering
Materials, Vol 22, issue 10, 2020, 2000322(1-29) wiley Q1, ISSN 14381656,
Ruma Arora Soni1 , K. Sudhakar1 and R.S. Rana3“Influence of Temperature and Light Intensity on the
Growth Performance of Spirulina platensis” International Journal on Emerging Technologies 10(2): 19-
22(2019) Q4 ISSN 09758364
Ashish Kumar, Ravindra Singh Rana& Rajesh Puroh “Effect of stirrer design on microstructure of
MWCNT and Al alloy by stir casting process” Advances in Materials and Processing Technologies
Taylor &Frances, vol 6, issue 2, pp 320-327, feb 2020. Q3, ISSN 2374068X
R. S. Rana, Archana Nigrawal, Saraswati Rana & Rajesh Purohi “Design and development of epoxy
hybrid composite gears for low-powered application” Advances in Materials and Processing
Technologies Taylor &Frances, vol 6, issue 2, pp 328-337, feb 2020. Q3, ISSN 2374068X
2019
9|Page
Abhay Agrawal, and R. S. Rana “Theoretical and experimental performance evaluation of single-slope
single-basin solar still with multiple V-shaped floating wicks” Heliyon Elsevier Heliyon 5 (2019) e01525.
doi: 10.1016/j.heliyon.2019. e01525, Q1, ISSN 24058440
Ruma Arora Soni , K. Sudhakar, R.S. Rana “Comparative study on the growth performance of
Spirulina platensis on modifying culture media” Energy Reports Elsevier 5 (2019) 327–336, Q1 ISSN
23524847
2018
Abhay Agrawal and R.S. Rana “An experimental investigation of single sloped basin type spherical
floating jute cloth absorbers solar still”,International Journal of Mechanical Engineering and Technology
(IJMET) Volume 9, Issue 6, June 2018, pp. 122–130, Q3, ISSN 09766340
Abhayagrawal&R. S. Rana“Compare the experimental performance of v-shaped black cotton and jute
cloth floating wicks solar stills in indian climatic condition” international journal of mechanical and
production engineering research and development (ijmperd) issn(p): 2249-6890; issn(e): 2249-8001 vol. 8,
issue 1 feb 2018, 923-932 Q3 ISSN 22496890
Anurag Shukla1, Sanjay Soni2, R.S.Rana3, Alok Singh4 “A Review on Effect of Heat Treatment on
Mechanical Behaviour of Fly ash Reinforced Al-Si Composite” Materials Today: Proceedings 5 (2018)
6426–6432
Saraswati Rana1a, NitishGuptaband R.S. Ranac “ Removal of Organic pollutant with the use of Rotating
Biological Contactor” Materials Today: Proceedings 5 (2018) 4218–4224
Priti Mishra P.M.Mishraand R.S. Ranac “Effect of Rice Husk ash Reinforcements on Mechanical
properties of Aluminium alloy (LM6) Matrix Composites” Materials Today: Proceedings 5 (2018) 6018–
6022
Amit Suhane Rajesh purohit and R.S.Rana “Prospects of Torsion Differential in Four Wheel Drive
Automobile Transmission System” Materials Today: Proceedings 5 (2018) 4036–4045
Abhay Agrawal R. S. Rana Pankaj K. Srivastava “Application of jute cloth (natural fibre) to enhance
the distillate output in solar distillation systems Materials Today: Proceedings 5 (2018) 4893–4902
10 | P a g e
Rajesh purohit and R.S.Rana “Characterization and evaluation of Mechanical behaviour of Epoxy-
CNT-Bamboo hybrid composite”.MaterialsToday: Proceedings 5 (2018) 3971–3980
2017
S. Rana*, R.S. Rana S. Suresh “Studies of biosorption kinetics of phenol by orange peel and tea waste”,
Digest Journal of Nanomaterials and Biostructures Vol. 12, No. 2, April - June 2017, p. 579 – 588 Q4 ISSN
18423582
Abhay Agrawal a, R.S. Rana , Pankaj K. Srivastava“Heat transfer coefficients and productivity of a
single slope single basin solar still in Indian climatic condition: Experimental and theoretical
comparison” Resource-Efficient Technologies 3 (2017) 466–482
Ashish kumre, R S Rana, Rajesh Purohit“Review on mechanical property of sisal glass fiber reinforced
polymer composites”, Material Today Journal 4 (2017) 3466–3476
Rajesh Purohit, PramodSahu, R.S. Rana,VishalParashar and Sankalp Sharma, “Analysis of Mechanical
Properties of Fiber Glass-Epoxy-Fly Ash Composites,”,Material Today Journal 4(2017) 3102–3109
AtulShuklaa, Pankaj Agarwalb, R.S. Ranac and Rajesh Purohitd “Applications of TOPSIS Algorithm on
various Manufacturing Processes: A Review Material Today Journal, 4 (2017) 5320–5329\
R.S. Rana1, Siddarth Patel2, Saraswati Rana3 and Rajesh Purohit4 “Properties Analysis of waste activated
carbon water filter cartridge particulate reinforced metal matrix composite”. Material Today Journal4
(2017) 5435–5444
R. S. Rana 1Ashish kumre2, Saraswati Rana3, and Rajesh Purohit4 “Characterization of Properties of
epoxy sisal / Glass Fiber Reinforced hybrid composite.Material Today Journal, Materials Today:
Proceedings 4 (2017) 5445–5451
Rajesh purohit and R.S.Rana “Development of Ni-Ti shape memory alloy through Noval powder
metallurgy route and effect of rolling on their properties” Material Today Journal, Materials Today:
Proceedings 4 (2017) 5330–5335
Anisha Christy, Rajesh Purohit, R. S. Rana , Swadesh Kumar SinghdandSaraswati Rana “Development
and Analysis of Epoxy/nano SiO2 Polymer Matrix Composite fabricated by Ultrasonic Vibration
assisted Processing”, Material Today Journal Materials Today: Proceedings 4 (2017) 2748–2754
11 | P a g e
Sumit Kumar Tiwari, Sanjay Soni, R.S. Rana, Alok Singh “Effect of Aging on mechanical behaviour
ofADC12-Fly Ash particulate composite”, Material Today Journal 4 (2017) 3513–3524
Dinesh Patidar and R.S.Rana“Effect of B4C particle reinforcement on the various properties of
aluminium matrix composites: a survey paper”,Material Today Journal 4 (2017) 2981–2988
Sumit Kumar Tiwari, Sanjay Soni, R. S. Rana,.Alok Singh “Effect of Heat Treatment on Mechanical
Properties of Aluminium alloy-Fly ash Metal Matrix Composite”, Material Today Journal 4 (2017)
3458–3465
Utkarshpandey, 1Pankaj Agarwal Rajesh purohit, R S Rana, Swadesh kumar Singh“Effect of TiC particles
on the mechanical properties of aluminium alloy metal matrix composites (MMCs). A Review”
Material Today JournalMaterials Today: Proceedings 4 (2017) 5452–5460
R. S. Rana, R.K.Dwivedi and Rajesh Purohit“Effect of variation of low cost reinforcement on natural
frequency Of polyester resin glass fibre hybrid composites”, Material Today Journal 4 (2017) 3451–
3457
Keshavsingh, R.S. Rana, Anjaney Pandey “Fabrication and Mechanical properties characterization of
aluminium alloy LM24/B4C composites” Materials Today: Proceedings 4 (2017) 701–708
G. Hemath Kumar1, Babu Vishwanath1, Rajesh Purohit2, R. S. Rana and Saurabh Singh Rajpurohitc
“Mechanical Behaviour Of Friction Stir Welding On Aluminium Based Composite Material”
Materials Today: Proceedings 4 (2017) 5336–5343
Rajesh Purohita, C. S. Vermab, R. S. Ranaa, R. K. Dwivedia, Rashmi Dwivedia and Deepen Banoriyaa
“Optimization of Process Parameters of Shot Peening Using ABQUS” Materials Today: Proceedings 4
(2017) 2119–2128
Gaurav Bajpai, Rajesh Purohit, R. S. Rana , Saurabh Singh Rajpurohit and Ajeet Rana “Investigation and
Testing of Mechanical Properties of Al-Nano SiC Composites through Cold Isostatic Compaction
Chamber”,”,Material Today Journal, Impact factor: 6.191, ISSN:1772-7061(Elsevier) 4 (2017) 2723–2732
C. S. Verma, Rajesh Purohit ,R. S. Rana2 and H. Mohit“Mechanical Properties of Bamboo Laminates
with other composites”, Material Today Journal4 (2017) 3380–3386
Rahul Shrivastava, Amit Telang, R. S Rana and Rajesh Purohit, “ Mechanical properties of Coir/ Glass
Fiber Epoxy Resin Hybrid Composite”, Material Today Journal 4 (2017) 3477–3483presented
12 | P a g e
Anubhav Shiva and Rajesh Purohit, R. S. Rana and Dinesh Kumar Koli “Noise and Vibration Emissions
of Railway Bridges”, ”, Material Today Journal 4 (2017) 3745–3753
2016
Ruma Arora Soni*, K. Sudhakar and R.S. Rana “Biophotovoltaics and Biohydrogen through artificial
photosynthesis: an overview International Journal of Environment and Sustainable Development, Vol. 15,
No. 3, 2016 313-325
Rajesh Purohit1, C. M. Krishna1,R. S. Rana2, Vikas Kumar3, Krishan Kumar patel3 “Optimization of
electric discharge machining parameters for al–3 weight % nanosicp
composites using copper electrode” Indian Journal of Engineering 408-414
Ruma Arora Soni1, K. Sudhakar2* and R. S. Rana3 “Sustainable biomass production from microalgae
for food, feed and biofuels: An integrated approach” Bioscience Biotechnology Research
Communications 9(4): 729-736 (2016)
2015
Rohit Kumar Gupta, Rajesh Purohit, R.S. Rana, Shelar Dipak, Ashutosh Mishra “A Review On Green
And Sustainable Manufacturing & Their Impact on Social, Economical, Environmental Prospects”,
International Journal on Applications in Science, Engineering & Technology Volume.1, Issue.1, 2015, pp.8-
12
Govind yadav1,Ravindra Singh Rana1, Abhay Agrawal2“A short review on advance manufacturing
technologies”International Journal on Applications in Science, Engineering & Technology Volume.1,
Issue.1, 2015, pp.18-22
Rohit Kumar Gupta*A.Saraogi, Rajesh Purohit, R. S. Rana“A Study on Focused Ion Beam Sources and
theirApplications A Study on Focused Ion Beam Sources and their
Applications”International Journal on Applications in Science, Engineering & Technology
Volume.1, Issue.1, 2015, pp.1-7
13 | P a g e
Govind Yadav1,a*, R. S. Rana2,b, R. K. Dwivedi3.c, Ankur Tiwari “Development and analysis of
automotive component using aluminium alloy nano silicon carbide composite”Applied Mechanics and
Materials Vols. 813-814 (2015) pp 257-262 Q4
Govind Yadav1, R. S. Rana2, R. K. Dwivedi “Development and Analysis of Connecting Rod Using
Aluminium Alloy Micro Silicon Carbide Composite” International Journal of Science and Research
(IJSR)ISSN (Online): 2319-7064Index Copernicus Value (2013): 6.14 | Impact Factor (2013): 4.438
Volume 4 Issue 3, March 2015
Abhay Agrawal, R.S.Rana“Ground water distillation by basin type solar still for different basin water
depth under the climatic condition of Rewa” International journal of engineering research and
applications volume 5 issue 12 2015.AbhayAgrawal et al. Int. Journal of Engineering Research and
Applications ISSN: 2248-9622, Vol. 5, Issue 12, (Part - 3) December 2015, pp.183-190
Vishwanath Prasad1, V K Soni2, R.S. Rana3, Anuj Singh Baghel4,Ankur Tiwari5, Govind Yadav
“Optimization of Mechanical Properties and Wear Parameters of Al alloy-B4C Composite Using
Taguchi Technique: A Review” International Journal of Science and Research (IJSR)ISSN (Online): 2319-
7064Index Copernicus Value (2013): 6.14 | Impact Factor (2013): 4.438 Volume 4 Issue 3, March 2015
Vishwanath Prasad1, V K Soni2, R S Rana3, Anuj Singh Baghel4,Ankur Tiwari5, Govind Yadav6 A
Review on Optimization of Friction and Wear Parameters (Al alloy-B4C) Composite Using Taguchi
Technique International Journal of Science and Research (IJSR)Volume 4 Issue 3, March 2015
Rahul Shrivastava1, Anisha Christy2, Amit Telang3 and R. S. Rana4 “Effect of chemical treatment and
curing parameters on mechanical properties of natural fiber reinforced polymer matrix composites-a
review” International Journal of Engineering Research and Applications ISSN : 2248-9622, Vol. 5, Issue 6,
( Part -1) June 2015, pp.70-75
Anuj Singh Baghel1, Vishwanath Prasad2, Ankur Tiwari3, Govind yadav4, Vilas warudkar5, R S Rana6
“The Effect of Heat Treatment on Mechanical Properties of ADC12-Sic Metal Matrix Composite: A
Review”International Journal of Science and Research (IJSR)ISSN (Online): 2319-7064Index Copernicus
Value (2013): 6.14 | Impact Factor (2013): 4.438
R. S. Ranaa, Rajesh Purohitb V.K.Sonic and S.Dasd “Characterization of Mechanical Properties and
Microstructure of Aluminium Alloy-SiC Composites” Material Today Journal, 2 ( 2015 ) 1149 – 1156
R. S. Ranaa, Rajesh Purohitb V.K.Sonic and S.Dasd “Development and Wear Analysis of Al- Nano SiC
Composite Automotive Cam”Material Today Journal, 2 ( 2015 ) 3586 – 3592
Krishnkant Sahu1, R.S. Rana2, Rajesh Purohit2, Dinesh K Koli2, Saurabh Singh Rajpurohit3 and Mayuresh
Singh2“Wear behavior and micro-structural study of Al/Al2O3 Nanocomposites before and after heat
treatment” Materials Today: Proceedings 2 ( 2015 ) 1892 – 1900
14 | P a g e
Mayuresh singha, R.S. Ranab, Rajesh Purohitc, krishnkant sahud “Development and Analysis of Al Matrix
Nano Composites fabricated by ultrasonic assisted Squeeze casting process” Material Today Journal, 2
(2015)3697 – 3703
Rajesh Purohit1, R.S. Rana1, R.K. Dwivedi1, Deepen Banoriya1 and Swadesh Kumar
Singh2“Optimization of electric discharge machining of M2 tool steel using grey relational
analysisMaterials Today: Proceedings 2 (2015) 3378 – 3387
Mayuresh singha, R.S. Ranab, Rajesh Purohitc, krishnkant sahud “Development and Analysis of Al Matrix
Nano Composites fabricated by ultrasonic assisted Squeeze casting process” Material Today Journal, 2
(2015)3697 – 3703
Shobhit Jain1, R.S. Rana2, PrabhashJain3 , “Study of microstructure and mechanical properties of AL-
Cu metal matrix reinforced with B4C particles composite” International research journal of engineering
and technology, vol.2 issue 6 sep 2016
Abhay Agrawal, R.S.Rana “A short review on solar water distillation for getting fresh water in rural
area”,International journal of current engineering and scientific research (IJCESR) Volume III Issue I 2016,
also presented in international conference on Futuristic trends in engineering, science, humanities and
technology(FTESHT 23-24 jan2016) IPS college Gwalior
Abhay Agrawal, R.S.Rana“Ground water distillation by basin type solar still for different basin water
depth under the climatic condition of Rewa” International journal of engineering research and
applications volume 5 issue 12 2015.
Krishnkant Sahu1,R.S. Rana2 Rajesh Purohit3 “A study of dry sliding wear behaviour of Al6061-Al2O3
Nano Composites”, Journal of Advanced Engineering Research ISSN: 2393-8447,Volume 2, Issue 1, 2015,
pp.11-16
2014
Sunil Sharma, Saraswti Rana, Ravindra Singh Rana1 “Properties and application of commercial
magnetorheological fluid – A review” International journal of advanced engineering and research
developmentvolume 1, issue 12, 2014, pp 124-128
R. S. Rana*, Rajesh Purohit*, Sanjay Soni and S. Das** “Comparison of Mechanical Properties and
Microstructure of Aluminum alloy Micron and Nano SiC Composites fabricated by Ultrasonic
Vibration”International journal of advanced engineering and research development,Volume 1,Issue 12,
December -2014, pp135-146
Alok Singh, Sanjay Soni, R. S. Rana “Performance analysis of natural draft wet cooling tower at
optimized injection height” International Journal of Mechanical and Production Engineering, ISSN: 2320-
2092, Volume- 2, Issue-10, Oct.-2014 1-5 Q3
15 | P a g e
Rajesh Purohita, KuldeepPurohitb, Saraswati Rana, R. S. Ranaa and Vivek Patel“Carbon NanoTubes and
their Growth methods”Procedia Material Science Journal 6 ( 2014 ) 716 – 728
Ravindra Singh Rana, Rajesh Purohit, Anil kumar Sharma, Saraswati Rana “Optimization of Wear
Performance of AA 5083/10 wt. % SiCp Composites Using Taguchi Method
Procedia Materials Science 6 ( 2014 ) 503 – 511
Rajesh Purohit, Dinesh K. Koli,R.S.Rana, Siddarth Chaudhary “Fabrication and Testing of Al-Al2O3
Nano composites” International Journal of Frontier in Technology, Vol 1 sep 2014, pp 29-33
2013
R. S. Rana, Rajesh Purohit and S. Das “Fabrication and Testing of Ultrasonically Assisted Stir Cast AA
5083-SiCp Composites”,International Journal of Engineering Research and Applications, Vol. 3, Issue 5,
Sep-Oct 2013, pp.386-393
R. S. Rana, Rajesh Purohit and S. Das “Tribologicalbehaviour of AA 5083/Micron and Nano SiC
composites fabricated by ultrasonic assisted stir casting process”,International Journal of Scientific and
Research Publication, volume 3, issue 9 September pp 1-7 2013
2012
R. S. Rana, Rajesh Purohit, and S Das “Reviews on the Influences of Alloying Elements on the
Microstructure and Mechanical Properties of Aluminum Alloys and Aluminum Alloy
Composites”,International Journal of Scientific and Research Publications, Volume 2, Issue 6, June 2012
pp 1-7
Rajesh Purohit*, R. S. Rana and C. S. Verma “Fabrication of Al-SiCp Composites through Powder
Metallurgy Process and Testing of Properties”, International Journal of Engineering Research and
Application ,Volume 2 issuse 3 may-june 2012 pp 420-437
Ravindra Singh Rana, Rajesh Purohit, Alok Singh “Design and stress analysis of Watt and porter
governor”International Journal of Scientific and Research Publication ,Volume 2 issue 6 June 2012 pp 1-6
R. S. Rana and Rajesh Purohit“Effect of Magnesium Enhancement on Mechanical property and Wear
Behaviour of LM6 Alloy”,International Journal of Scientific and Engineering Research, Volume 3 issue 7
july 2012 pp 1-5
Rajesh Purohit Dinesh Kumar Koli, R. S. Rana“ Development and Characterization of Al Nano Al2O3
Composites”International Journal of Advanced Material Science(ISSN 2231-1211)Volume 4, Number 1,
2013 page 145-155 (Also presented in National conference on Nano Materials, Karunys University,
Coimbatore, 3-4 December 2012)
16 | P a g e
1.International conferences: 47
2021:
Tanya Buddia, , R.S. Ranab“Fabrication and finite element analysis of two wheeler connecting rod
using reinforced aluminum matrix composites Al7068 and Si3N4” Materials Today: Proceedings,
44(2021). 2471-2477
R.S. Ranaa , Tanya Buddib, , Rajesh Purohit, “Effect of SiC reinforcement on the mechanical properties
of Kevlar fiber based hybrid epoxy composites” Materials Today: Proceedings, 44(2021) 2478-2481
Rajesh Purohit ⇑ , R.S. Rana, Vinod Yadav, Ramnarayan Singh, Shubham Kushwaha “Magnetic abrasive
finishing of non-magnetic materials (Al 6061) using flexible magnetic brush Material”s Today:
Proceedings Volume 44, Part 1, 2021, Pages 2205-221
Ashish Singh Sanjay soni, R.S.rana“Recent Trends on Furnace Design and Stirrer Blade Geometry
used in Stir Caster: A Focused Review” International Conference on Advancement in Materials,
Manufacturing and Energy Engineering (ICAMME-2021), 18th – 20th February, 2021 Organized by
Department of Materials and Metallurgical Engineering in association with Department of Mechanical
Engineering & Energy Centre Maulana Azad National Institute of Technology, Bhopal
Pankaj Sonkusare1, Dr. Pankaj Agarwal2, Dr. SK Dhakad3, Dr. Ravindra S Rana4"A review paper: Brief
discussion on power generation by the use of various technologies from bio-renewable resources”,
international conference in technology, innovation in mechanical engineering (TIME 2021), SIRT
Gandhinagar
Pankaj Sonkusare1, Dr. Pankaj Agarwal2, Dr. SK Dhakad3, Dr. Ravindra S Rana4“A review paper: study
of various renewable resources polymer and different types of nano composite materials”, international
conference in technology, innovation in mechanical engineering (TIME 2021), SIRT Gandhinagar
Ashish Kumar, Rajesh purohit, R.S. Rana, Krishan Kumar Patel “Design, application and performance
analysis of kinetic energy recuperation system for pedal cycle” international conference on mechanical
engineering and managerial applications for productivity enhancement and marketability [mmpm 2021]
15th-16th September 2021
17 | P a g e
ArchanaNigrawal and R.S. Rana “Flax and banana fiber based poly vinyl alcohol biodegradable
composites” ” international conference on mechanical engineering and managerial applications for
productivity enhancement and marketability [mmpm 2021] 15th-16th September 2021
Krishan Kumar Patel, Harishchandrapatel, Deepen Banoriya Ravindra Sing Rana, Rajesh Purohit “Self-
actuating smart shape memory polymer nanocomposite materials” ” international conference on
mechanical engineering and managerial applications for productivity enhancement and marketability
[mmpm 2021] 15th-16th September 2021
Bipin Kumar, R.S. Rana, and SaraswatiRana “Epoxy based self-healing materials loaded with natural
drying oil: a future prospective” ” international conference on mechanical engineering and managerial
applications for productivity enhancement and marketability [mmpm 2021] 15th-16th September 2021
R.S. Rana, Bipin Kumar, Saraswati Rana “Optimization of Milling Parameters for LM24- Composite
using Genetic Algorithm” ” international conference on mechanical engineering and managerial
applications for productivity enhancement and marketability [mmpm 2021] 15th-16th September 2021
Ashish Kumar, R.S. Rana, Anurag Namdev, “Martensitic phase formation and its Tribological
behaviour of low carbon steel” ” international conference on mechanical engineering and managerial
applications for productivity enhancement and marketability [mmpm 2021] 15th-16th September 2021
ArchanaNigrawal, Dr. R.S. Rana and Dr.Saraswati Rana “Hybrid Natural fibre Reinforced PVA (Poly
Vinyl Alcohol) composites and their Mechanical properties” ” international conference on mechanical
engineering and managerial applications for productivity enhancement and marketability [mmpm 2021]
15th-16th September 2021
Ashish Kumar, Dr.R.S.Rana, Dr. Rajesh Purohit “A Review of Mechanical and TribologicalBehavior of
Stir Cast AA7XXX Metal matrix composites” ” international conference on mechanical engineering and
18 | P a g e
managerial applications for productivity enhancement and marketability [mmpm 2021] 15th-16th September
2021
Vishal Kumar Sen, Dr. Sanjay Soni, Dr. R. S. Rana, Ashish Kumar Singh “Synthesis and wear behavior
of al-7075 hybrid metal matrix particle composite” ” international conference on mechanical engineering
and managerial applications for productivity enhancement and marketability [mmpm 2021] 15th-16th
September 2021
SumitVerma, Dr. R.S Rana “Modelling and Simulation of automotive bumper component made by
polymer composite materials” ” international conference on mechanical engineering and managerial
applications for productivity enhancement and marketability [mmpm 2021] 15th-16th September 2021
Dr. Rajesh Purohit, L. Moushmi, ShubhamKushwaha, MMU Qureshi and R. S. Rana “An overview on the
fabrication of aluminum metal matrix nano composites”
AdarshChaurasiya, Dr. R.S. Rana, Ashish Kumar “Synthesis and characterization of epoxy-based basalt
fibre using filler materials polymer composite manufactured through hand layup” ” international
conference on mechanical engineering and managerial applications for productivity enhancement and
marketability [mmpm 2021] 15th-16th September 2021
Gaurav Bajpai, Rajesh Purohit, Pradeep Kumar Yadav and R. S. Rana “Recent Studies on Inter Laminar
Shear Strength of Glass Fiber Reinforced Polymer Composites” ” international conference on
mechanical engineering and managerial applications for productivity enhancement and marketability
[mmpm 2021] 15th-16th September 2021
Ashish Kumar, Ravindra Singh Rana, Rajesh Purohit “A review: Fabrication methods and tensile
behaviour of Aluminium Metal Matrix nanocomposites” ” international conference on mechanical
engineering and managerial applications for productivity enhancement and marketability [mmpm 2021]
15th-16th September 2021
2020:
R.S. Ranaa, , Saraswati Ranab , Archana Nigrawalc , Bipin kumara , Ashish kumara “Preparation and
mechanical properties evaluation of polyvinyl alcohol and banana fibres composite”Materials Today:
Proceedings, 26(2020). 3145-3147
19 | P a g e
Ashish kumar, R.S. Rana, Rajesh Purohit “Synthesis & analysis of mechanical and tribological
behaviour of silicon carbide and graphite reinforced aluminium alloy hybrid composites”, Materials
Today: Proceedings, 26(2020). 3152-3156
2019:
Ashish Kumar,Rishabh Kumar, V.K.Soni, L Jayahari, R. S. Rana, and Rajesh Purohit, “Optimization of
Wear and Friction Parameters of (LM24/B_4C) composite”, 9th International Conference on Material
Processing and Characterization, 8-10 March, 2019, Gokaraju Rangaraju Institute of Engineering and
Technology, Hyderabad, Materials Today: Proceedings (Elsevier), ISSN: 2214-7853.
Archana Nigrawal, Tanya Buddi, R .S. Rana, Rajesh Purohit, “Development of Epoxy/ Nano SiO2
composites and their Mechanical Studies”, 9th International Conference on Material Processing and
Characterization, 8-10 March, 2019, Gokaraju Rangaraju Institute of Engineering and Technology,
Hyderabad, Materials Today: Proceedings (Elsevier), ISSN: 2214-7853.
R.S.Rana and ved ashok malviys“Comparative experimental study of single slope single basin solar
still”, international conference on advanced in power generation from renewable energy sources 11-12 feb
2019 banswara india.
2015
Ruma Arora Soni, K.sudhakar and R.S.Rana “The optimization of biohydrogen production by algae
from biofuel synthesis" Ist international conference on recent advances in bio - energy research - ICRABR -
2015.
Ruma Arora Soni, K.sudhakar and R.S.Rana"Overview of Nano structured Biophotovoltaics for
generating hydrogen and electricity from photosynthesis" 2nd international conference on Bioenergy,
Environment and sustainable Technologies "- BEST- 2015
2014
20 | P a g e
KrishakantSahuRajesh Purohit and R. S. Rana,“Advances in Hydroforming processes”,International
conference MANIT Bhopal (IC MEETS 2014) January 29-31, 2014
Sunil Sharma and Ravindra Singh Rana“Comparative analysis of metals used as catalyst in Catalytic
convertor: A review”,International conference MANIT Bhopal (IC MEETS 2014) January 29-31, 2014
Ravindra Singh Rana, Rajesh Purohit and S. Das “Tribologicalbehaviour of AA 5083/ Nano SiC
composites fabricated by ultrasonic assisted stir casting process”,International conference MANIT
Bhopal (IC MEETS 2014) January 29-31, 2014
Dr. Aloksingh, Dr. Sanjay soni and Dr. R.S.Rana“Performance analysis of natural draft wet cooling
tower at optimized injection height”, Forth IRF International Conference(IRAJ Research forum)Goa 13th
July 2014
Pawankumar, Dr. Sanjay Soni, Dr. R.S.Rana and Dr.AlokSingh “Mechanical behaviour and dry sliding
wear responce of Al-Si-SiC particulate composites, Forth IRF International Conference(IRAJ Research
forum)Goa 13th July 2014
Krishnkant sahu1*, R.S. Rana2**, Rajesh Purohit3** and Dinesh Kumar Koli2*,”A study of dry sliding wear
behaviour of Al6061-Al2O3 Nano Composites”International Conference On Industrial, Mechanical and
Production Engineering: Advancements and Current TrendsDepartment of Mechanical Engineering,
MANIT, BhopalNovember 27-29, 2014
Govind yadav1, Supriya Kabra2, Ravindra Singh Rana3, Abhay Agrawal4“A short review on advance
manufacturing technologiesInternational Conference On Industrial, Mechanical and Production
Engineering: Advancements and Current TrendsDepartment of Mechanical Engineering, MANIT, Bhopal
November 27-29, 2014
Shelar Dipak 1, R. K. Gupta1, R. S. Rana 2, Rajesh Purohit “A review of micro machining technologies:
micro millingInternational Conference On Industrial, Mechanical and Production Engineering:
Advancements and Current TrendsDepartment of Mechanical Engineering, MANIT, Bhopal November 27-
29, 2014
R K Gupta1, R S Rana2 “Green and sustainable manufacturing, their effect on social, economical,
environment–a review”International Conference On Industrial, Mechanical and Production Engineering:
Advancements and Current TrendsDepartment of Mechanical Engineering, MANIT, Bhopal November 27-
29, 2014
R K Gupta1, R S Rana and Rajesh Purohit “Ion beam focusing” International Conference On Industrial,
Mechanical and Production Engineering: Advancements and Current TrendsDepartment of Mechanical
Engineering, MANIT, Bhopal November 27-29, 2014
2013
21 | P a g e
1.R. S. Rana, Rajesh Purohit and S.Das “A Review on Fabrication and Characterization of Aluminum
Matrix Nano SiC Composites”, 4thInternational Conference on Recent Advances in Composite Materials
Feb.18-21 2013 Goa India.
2.Alok Singh, R.S. Rana“Effect of Alloying Elements on the Microstructure and Mechanical
Properties of Aluminum Alloys Composites,4thInternational Conference on Recent Advances in
Composite Materials Feb.18-21 2013 Goa India
IV.National conferences:
National conference: 18
R.S.Rana, Saraswati Rana and Bipin Kumar “ Effect of Adding TiB2 in Aluminum alloy on impact
strength of composites,
R.S.Rana, Archana Nigarwal, Saraswati Rana “Mechanical properties of wood powder composites”.
Saraswati Rana, R.S.Rana and shailendra Dwivedi “A study on Mechanical Behavior of Exopy fiber
reinforced hybrid composites”,
R.S.Rana, Shailendra Dwivedi, Saraswati Rana “Effect of Particle size and weight percentage on
properties of polymer matrix composites.
2016
Neeraj Patel, Tarun Gupta and R.S.Rana, “Design and development of CVT casing of an ATV to
increase its efficiency and life” National conference on Emanate Treands in mechanical and Allied
Engineering Science CDGL indore 2016.
Saraswati Rana1, Neeraj Patel2, Tarun Gupta3, Ajeet Rana4 R.S.Rana5“Development and Analysis of
Epoxy/Glass Fibre Composites”NC JNCT Bhopal 21-22 April 2017
Saraswati Rana1 Ajeet Rana2 R.S.Rana3“Impact of sustainable and green production on social,
economical, and environmental area- a review”NC JNCT Bhopal 21-22 April 2017
2015
Vishwanath Prasad1, V K Soni2, R S Rana3, Anuj Singh Baghel4,Ankur Tiwari5, Govind Yadav6 “A
Review on Optimization of Friction and WearParameters (Al alloy-B4C) Composite Using
TaguchiTechnique”NCKITE Raipur,10 April 2015
22 | P a g e
Abhishek Singh Bhadouria (1)𝑎 , R.k.Dwivedi (2)𝑏 , Ravindra Singh Rana (𝟑)𝒄 , Rajankumar (4)𝑑 “A
Review: Use of Supply Chain Management in Inventory Models Multiple- Supplier” NCKITE Raipur,
10 April 2015
Anuj Singh Baghel1, Vishwanath Prasad2,Ankur Tiwari3, Govind yadav4,Vilas warudkar5,R S Rana6 “The
effect of heat treatment on mechanical properties of ADC12-SiC metal matrix composite: A
Review’’NCKITE Raipur,10 April 2015.
2013
Yagyesh Vyas, Rajesh purohit, Dinesh kumarkoli and R.S.Rana“Fabrication and Analysis of Al-Al2o3
Nano composites Connecting Rod for Automotive Application”National Conference on Frontiers in
Mechanical Engineering (FAME 2013) 29-31 August 2013 (MANIT)
Pundrik Dubey Rajesh Purohit, and R. S. Rana“Automotive application of aluminum matrix composite
materials- an overview”National Conference on Frontiers in Mechanical Engineering (FAME 2013) 29-31
August 2013 (MANIT)
2006
SPS Rajput,P Mishra ,Juned Raheem, R.S.Rana“Information and Communication technology for rural
development”National Seminar on Rural Technologies Bhopal 4-5 march 2006
P MishraSPS RajputAlok Singh,R.S. Rana “IT for rural development –an Innovative
approach”National Seminar on Rural Technologies Bhopal 4-5 march 2006
Ruma Arora Sonia*, R.S. Ranab and SS Godara Characterisation tools and techniques for nanomaterials
and nanocomposites, Nanomaterials and Nanocomposites Characterization, Processing, and Applications CRC
Press Taylor and Frances 2021
Ashish Kumar Singh, Sanjay Soni, Ravindra Singh Rana, “Recent Trends on Furnace Design and
Stirrer Blade Geometry Used in Stir Caster: A Focused Review.” Advancement in Materials,
Manufacturing and Energy Engineering, Vol. I (2022): 147-159.[Springer, SCOPUS, Book Chapter]
23 | P a g e
S. S. Godara1*, Vinay Swami2and R. S. Rana3* Study of Plant based Fibers and Resins in Composites,
for book “Plant and Animal Based Composites” Published by water de Gruyter GmbH, Germany 2021
BOOKS PUBLISHED: 02
Proceeding:
RESEARCH PROJECTS/CONSULTANCY
1. Research Projects:
2- CONSULTANCY
6 Fabrication and Dr Rajesh 29500/- Ajay Bharwaj SSBT college 01/11/201 Completed
testing of Metal Purohit of Engineering and 9 to
Matrix Technology Jalgaon 27/07/202
composites Dr R.S.Rana 1
Dr Raman
Nateriya
25 | P a g e
materials
16. Third party Dr. Sarvesh 1,18,000/ Hyva India Pvt. agency 27/12/202 Ongoing
inspection at Rajput, - 2
factorylocated Dr.R.S. Rana
in Mumbai for
the equipment
17. Chemical and Dr. 50000/- M/s bansal contruction pvt 12/01/202 Ongoing
Physical Sunndarlal +18%GS ltd Bhopal 2
analysis of Iron pal,Dr. R.S. T
TMT grade Rana
FE5000 D of
26 | P a g e
various
diameter
27 | P a g e
Conference Organized: 08
Programme Details
S. Programme Tile Duration Organizing
No. Organization
From To
1 5th International conference on March 12, March 13, GRIET institute,
Materials processing and 2016 2016 Hyderabad and MANIT
Characterisation (ICMPC 2016) Bhopal. Worked as a joint
secretary in the
conference
2 7th International conference on March 17, March 19, GRIET institute,
Materials processing and 2017 2017 Hyderabad and MANIT
Characterisation (ICMPC 2016) Bhopal. Worked as a joint
secretary in the
conference
3 8th International conference on March 16, March 18, GRIET institute,
Materials processing and 2018 2018 Hyderabad and MANIT
Characterisation (ICMPC 2018) Bhopal. Worked as a joint
secretary in the
conference
4 9th International conference on March 8, March 10, GRIET institute,
Materials processing and 2019 2019 Hyderabad and MANIT
Characterisation (ICMPC 2019) Bhopal. Worked as a joint
secretary in the
conference
5 10th International conference on 21 feb 2020 23 feb 2020 GLA Mathura
Materials processing and
Characterisation (ICMPC 2020)
6 12th International conference 6 oct 2021 09 oct 2021 NITTTR Chandighar
28 | P a g e
on Materials processing and
Characterization (ICMPC 2020)
7 International conference on 15th sep 2021 16th Sept MANIT Bhopal
mechanical engineering and 2021
managerial applications for
productivity enhancement and
marketability [mmpm 2021]
29 | P a g e
MANIT Bhopal
9. Recent Trends in Industrial and 30 June -12 July 2008 MHRD-AICTE Sponsored,
Production Engineering Department of Applied
Mechanics MANIT Bhopal
30 | P a g e
Trends in Renewable Energy 2012 Engineering MANIT
18. ISTE workshop on Engineering 26th Nov 06 Dec, 2013 Indian Institute of
Mechanics). Technology Bombay under
the National Mission on
Education through ICT
(MHRD
19. Workshop on Tribology: Saturday 6th 6th July 2013 Tribology Society of India
Machine, Materials and July 2013 Bhopal Chapter and
Maintenance. AMPRI Bhopal
22. A short term training programme 2 May 6May 2016 Chemical Deptt. MANIT
on frontiers of material science
and technology
23. Recent trends in solar and wind 20June 24 June 2016 Mechanical deptt. MANIT
energy
24. Performance Management & 12Dec 16 December National Productivity
Knowledge management council Jaipur (GOA)
2016
25. National Seminar on Rural 4March 5 march 2006 organised by Vijnana
Technologies Bharti MP Bhopal
31 | P a g e
National conference on Frontiers 29August 31 August organized by Department
27.
in Mechanical Engineering of Mechanical Engineering
2013
(FIME-2013) MANIT Bhopal
30. Forth IRF International 13th July 13th July 2014 Goa
Conference (IRAJ Research 2014
forum)
Awards:
Guest of Honour: Preside as the guest of honour, 7th sepetmber 2020, VIT Jaipur
TIQIP-III FDP Nanomaterials and its applications in science and Technology 7-9 September 2020,
Vivekanad Institute of Technology Jaipur
Details of Patents
1.
Expert lecture/BOS Member/Conference session chaired/ Journal reviewer/ UPSC members/etc.
Delivered one expert lecture on Nanotechnology and Nanomaterials on 30 December 2015 at
BHEL
Delivered one expert lecture on Nanotechnology on 06 May 2016 at BHEL
Delivered one expert lecture on “Nanotechnology and Nanomaterials and their Impact on Society”
on 12 May 2017 at BHEL
Delivered one expert lecture on “Nanotechnology and Nanomaterials” on 21 March 2017 at
GRIET
Delivered a expert lecture on development and analysis of nano composite for automotive
application in Nano micro bulk material processing and nanotechnology STTP hyderabad 20-26
2017 march
Delivered a expert lecture on nanotechnology and nanomaterial in BHEL Bhopal dated 12May
2017-05-19
Nanocomopites, 28th May, 2020, in Recent Advances in Materials characterization 23-28 May
2020
Expert Lecture on……….in FDP on composite Materials, 23-25th January 2020, TRUBA Institute
33 | P a g e
of Engineering and Informational Technology Bhopal
Processing of Advanced Materials. Dated 29/03/2019, STTP on Recent Advances and Industrial
Applications of Advanced Machining Processes, BIET Jhanshi
Expert talk on 21/12/2018, STTP Role of Nanocomposites in Science and Engineering RNSE-
2018, December 18-22, 2018
Advanced in Automobile Engineering, 14 Feb,2020, FDP AICTE-RGPV Sponsored, RJIT,
Tekanpur
Advances in Material Science and Manufacturing, 28Feb-2020, Expert Lecture in National
Conference Recent Advances in Manufacturing, Automobile and Thermal Engineering, SISTech-R
Latest treads in synthesis of NMMCs and NPMCs, Self finance online workshop on advancements
in Materials and Manufacturing systems (AMMS-2020, 13-17, August 2020
Introduction micro and Nanomachining-two day national webinar on Newer Machining Methods
on September, 25-26, 2020, Engineering College Banswara Rajastan
Simulation and Modelling of Advanced Materials for Automotive Industries " . ALAT FDP.
LNCT Bhopal 16 October 2020. Application of FEM & CFD for Solving Complex Engineering
Problems
Technical Session Chaired in International conference ICAST-2020 LPU Punjab, Recent Trends in
Industrial and Production Engineering, 6th November 2020
Technical Session Chaired in International conference ICAST-2020 LPU Punjab Recent Trends in
Industrial and Production Engineering, 7th November 2020
34 | P a g e
4 Institution of Engineers Fellow F1286370
Lab In charge of 2005 Till Date Lab work, administrative and training to students
Dynamics of machines
Lab
Member in 2008 Till Date All Academic work including syllabus revision.
Department UG and
PG committee
Co I/C May 2014 Till Lab work, administrative and training to students
Nanocomposite lab
Warden Boys hostel Oct. 2005 Sep.2009 All related work of Hostel
Advance Dynamics of Procurement of Latest machines worth 1,0000000 Rs.
Machine Lab
Coordinator M.Tech Jan 2005 2011 Revision of M.Tech Syllabus, Time Table and other
(Maintenance)course Academic Related works For M.Tech(Maintenance)
Program
Member of discipline 2016 2016 Discipline related administrative work
committee techno-
search
35 | P a g e
(A) Department level administration:
Member of Revision Scheme and syllabi for M. Tech industrial design (BOS)
Nanocomposites
Project work evaluation committee, lab related work of mechanisms of machines lab, nanocomposite lab,
major project coordinator
Appointment of Examiner for M Tech Thesis at RGTU Bhopal, 31/07/19, 03 thesis evaluated, Dr Prashant
Sharma was the internal examiner
Appointment of Judge for CBSE Regional level Science Exhibition held at International Public school
Bhopal, 25th and 26th November 2019
Appointed as M.Tech external examiner of my MTech student, Mr Prashant Kumar Vaishnav. RTU Kota,
30 September 2020
Recent Advance and industrial Applications of Advanced Machining Processes RAIAMP-2019, March 26-
30, 2020, STTP, BIET Jhanshi
36 | P a g e
National conference , Advisory committee, Futuristic in Mechanical Engineering FME-2019, MMM
University Gorakhpur
Expert Member of interview panel for the selection of technicians in MPCOST Bhopal
District Web Casting Coordinator in Loksabha election Nov. 2014
District Web Casting Coordinator in Vidhansabha election April 2018
Advisory Committee Member of ICMPC-VU-2016, Victoria Univ., Melbourne Active participation in
advisory committee06.12.2016, 07.12.2016
Subject Expert and member in UP Public service commission Prayagraj for the selection of lectures in
polytechnic colleges 2022
DECLARATION
I hereby, declare that I have read carefully and understood the above information and that all the entries in
this application form are true to the best of my knowledge and belief.
Associate Professor
MANIT Bhopal MP
37 | P a g e