Professional Documents
Culture Documents
DR - Mohamed Sameh Abdalghany Salem: Qualifications
DR - Mohamed Sameh Abdalghany Salem: Qualifications
contact_mail
mohamedsameh@mans.edu.eg Director of Documents- Hydraulic Machines LAb
DoB : 05/08/1986
Mansoura University-Faculty of Engineering-Mechanical Power Engineering
insert_drive_file
Researches 21
Qualifications holds PhD in Mission internal in 2020 in the specialty of Chemical And
school Petrochemicals Engineering from Egypt-Japan University of Science and Technology
on Egypt
holds M.A. in Mission internal in 2016 in the specialty of Mechanical Power
Engineering from Mansoura University - Faculty of Engineering on Egypt
holds Bachelor with degree excellent with Honor grade in Mission internal in 2008
in the specialty of Mechanical Power Engineering from Mansoura University -
Faculty of Engineering on Egypt
Job grades Lecturer on 2020-03-29
layers Assistant Lecturer on 2016-06-26
Demonstrator on 2009-05-09
Administrative Director of Documents- Hydraulic Machines LAb from 2021-12-01
personScientific
positions FABLAB director- Faculty of Engineering- Mansoura University from 2021-06-15
1. Investigating the performance characteristics of low concentrated photovoltaic systems
library_booksresearches utilizing a beam splitting device under variable cutoff wavelengths (2022)
Kandil A.A.,Awad M.M.,Sultan G.I.,Salem M.S.
Renewable Energy (196) ,375-389
2. Year-long energy analysis of building brick filled with phase change materials (2022)
Elmarghany M.R.,Radwan A.,Shouman M.A.,Khater A.A.,Salem M.S.,Abdelrehim O.
Journal of Energy Storage (50)
3. Electrospinning of polyvinylidene fluoride membranes: Effect of membrane
composition and fabrication conditions (2022)
Zeitoun Z.,El-Shazly A.H.,Nosier S.,Elmarghany M.R.,Salem M.S.,Taha M.M.
Egyptian Journal of Chemistry (65) ,41-50
4. Solid desiccant-based dehumidification systems: A critical review on configurations,
techniques, and current trends (2022)
Abd-Elhady M.M.,Salem M.S.,Hamed A.M.,El-Sharkawy I.I.
International Journal of Refrigeration (133) ,337-352
5. Thermal analysis of a hybrid high concentrator photovoltaic/membrane distillation
system for isolated coastal regions (2021)
Rabie M.,Ali A.Y.M.,Abo-Zahhad E.M.,Elqady H.I.,Elkady M.F.,Ookawara S.,El-
Shazly A.H.,Salem M.S.,Radwan A.
Solar Energy (215) ,220-239
6. Modeling of an integrated air gap membrane distillation unit utilizing a flat plate solar
collector (2020)
Rabie M.,Salem M.S.,Ali A.Y.M.,El-Shazly A.H.,Elkady M.F.,Ookawara S.
Energy Reports (6) ,1591-1596
7. Performance evaluation and kinetic analysis of photocatalytic membrane reactor in
wastewater treatment (2020)
Zeitoun Z.,El-Shazly A.H.,Nosier S.,Elmarghany M.R.,Salem M.S.,Taha M.M.
Membranes (10) ,1-18
8. Developing an optimum design of the double layer microchannel heat sink for high
speed CPUs (2020)
Radwan A.,Abo-Zahhad E.M.,Abdelrehim O.,El-Shazly A.H.,Ookawara S.,Awad
M.M.,El-Kady M.F.,Elmarghany M.R.,Salem M.S.,Shouman M.A.
ASME 2020 18th International Conference on Nanochannels, Microchannels, and
Minichannels, ICNMM 2020, collocated with the ASME 2020 Heat Transfer Summer
Conference and the ASME 2020 Fluids Engineering Division Summer Meeting
9. A hepatic sinusoids-based microreactor for photocatalytic degradation of methylene
blue by titanium dioxide (2020)
Shouman M.A.,El-Shazly A.H.,Salem M.S.,Elmarghany M.R.,Abo-Zahhad
E.M.,Elkady M.F.,Sabry M.N.,Radwan A.
ASME 2020 18th International Conference on Nanochannels, Microchannels, and
Minichannels, ICNMM 2020, collocated with the ASME 2020 Heat Transfer Summer
Conference and the ASME 2020 Fluids Engineering Division Summer Meeting
10. Four compartments stepwise varied width microchannels cooling approach for densely-
packed module of concentration photovoltaics (2020)
Abo-Zahhad E.M.,El-Shazly A.H.,Ookawara S.,El-Kady M.F.,Ali A.Y.M.,Elqady
H.I.,Elmarghany M.R.,Salem M.S.,Shouman M.A.,Radwan A.
ASME 2020 18th International Conference on Nanochannels, Microchannels, and
Minichannels, ICNMM 2020, collocated with the ASME 2020 Heat Transfer Summer
Conference and the ASME 2020 Fluids Engineering Division Summer Meeting
11. Effect of cell design on the thermal performance of direct contact membrane distillation
system utilizing a nanocomposite membrane (2020)
Elmarghany M.R.,El-Shazly A.H.,Radwan A.,Abo-Zahhad E.M.,Nady N.,Sabry
M.N.,Shouman M.A.,Salem M.S.
ASME 2020 Heat Transfer Summer Conference, HT 2020, collocated with the ASME
2020 Fluids Engineering Division Summer Meeting and the ASME 2020 18th
International Conference on Nanochannels, Microchannels, and Minichannels
12. Triple-layer nanocomposite membrane prepared by electrospinning based on modified
PES with carbon nanotubes for membrane distillation applications (2020)
Elmarghany M.,El-Shazly A.,Rajabzadeh S.,Salem M.,Shouman M.,Sabry
M.,Matsuyama H.,Nady N.
Membranes (10)
13. Development of Janus membrane with controllable asymmetric wettability for highly-
efficient oil/water emulsions separation (2020)
Yuqing - Lin,Mohamed S. - Salem,Lei - Zhang,Qin - Shen,Ahmed H. - El-
shazly,Norhan - Nady,Hideto - Matsuyama
Journal of Membrane Science (606) ,118141 -
14. PES/PVDF blend membrane and its composite with graphene nanoplates: Preparation,
characterization, and water desalination via membrane distillation (2019)
Salem M.,El-Shazly A.,Nady N.,Elmarghany M.,Sabry M.
Desalination and Water Treatment (166) ,9-23
15. Effect of adding functionalized graphene on the performance of PVDF membrane in
direct contact membrane distillation (2019)
Salem M.S.,El-Shazly A.H.,Elmarghany M.R.,Sabry M.N.,Nady N.
Key Engineering Materials (801 KEM) ,337-342
16. Novel membrane suitable for membrane distillation: Effect of mixed nanofillers on the
membrane performance (2019)
Elmarghany M.R.,El-Shazly A.H.,Salem M.S.,Sabry M.N.,Nady N.
Key Engineering Materials (801 KEM) ,325-330
17. 3D numerical investigation on commercial PTFE membranes for membrane
distillation: Effect of inlet conditions on heat and mass transfer (2019)
Dr.Mohamed Sameh Abdalghany Salem,Ahmed Elshazly,Norhan Nady,Dr.Mohamed
Ragab Elmarghany Abokhalil,Dr.Mahmoud Abdelghany Elsaeed Shouman,Mohamed
Nabil Saad El Din Sabry
Case Studies in Thermal Engineering (Vol. 13) ,100396
18. Thermal analysis evaluation of direct contact membrane distillation system (2019)
Dr.Mohamed Ragab Elmarghany Abokhalil,Ahmed Elshazly,Dr.Mohamed Sameh
Abdalghany Salem,Mohamed Nabil Saad El Din Sabry,Norhan Nady
Case Studies in Thermal Engineering (Vol. 13) ,100377
19. Shape optimization of an innovative hepatic sinusoids-based micromixer (2019)
Dr.Mahmoud Abdelghany Elsaeed Shouman,Ahmed Elshazly,Marwa
Elkady,Dr.Mohamed Sameh Abdalghany Salem,Dr.Mohamed Ragab Elmarghany
Abokhalil,Mohamed-Nabil Sabry
Chemical Engineering and Processing-Process Intensification (Vol. 146) ,107684
20. Key parameters affecting concentration ratio of a solar concentrator based on lenslens
beam generator configuration (2014)
Tawfik M.,Salem M.
43rd ASES National Solar Conference 2014, SOLAR 2014, Including the 39th
National Passive Solar Conference and the 2nd Meeting of Young and Emerging
Professionals in Renewable Energy (1) ,95-101
21. Analysis and Performance of Solar Concentrating-Tracking System (2010)
M Salem M Tawfik A Hamed
Teaching teaching Computer-aided Mechanical drawing in the Mansoura University - Faculty of
menu_book
experiences Engineering from 2022 to 2022
teaching Power Plants Engineering in the Mansoura University - Faculty of
Engineering from 2022 to 2022
teaching Desalination in the Mansoura University - Faculty of Engineering from 2021
to 2022
teaching Thermodynamics 1 in the Mansoura University - Faculty of Engineering
from 2021 to 2022
teaching Renewable Energy in the Mansoura University - Faculty of Engineering from
2021 to 2022
teaching Programmimg with C Language in the Mansoura University - Faculty of
Engineering from 2020 to 2022
teaching Operations Research in the Mansoura University - Faculty of Engineering
from 2020 to 2022
teaching three-D modeling of heat transfer and fluid flow in the Mansoura University -
Faculty of Engineering from 2020 to 2022