Professional Documents
Culture Documents
2ar-Fe Engine Control System - Throttle Body - On-Vehicle Inspection (2011 Rav4)
2ar-Fe Engine Control System - Throttle Body - On-Vehicle Inspection (2011 Rav4)
ON-VEHICLE INSPECTION
1. CHECK THROTTLE BODY ASSEMBLY
(a) Check the throttle control motor operating sounds.
(2) When pressing the accelerator pedal, check the operating sound of the running motor. Make sure that
no friction noises are emitted from the motor.
(4) Enter the following menus: Powertrain / Engine and ECT / Data List / All Data / Throttle Sensor
Position.
(5) Depress the accelerator pedal. When the throttle valve is fully opened, check that the value of "Throttle
Sensor Position" is within the specification.
NOTICE:
When checking the standard throttle valve opening percentage, make sure the shift lever is in N.
If the percentage is less than 60%, replace the throttle body assembly.
1 of 1 11/20/2011 8:34 AM