Download as pdf or txt
Download as pdf or txt
You are on page 1of 5

3/16/22, 8:18 PM CE Elective 4 Prelim exam

CE Elective 4 Prelim exam


*Required

1. Email *

2. Name: *

3. Long term detrimental effects can rapidly increase the pre-stressing forces 5 points
and could result in unexpected failure. *

Mark only one oval.

True

False

4. Long term properties can be classified in terms of ____ and _____. (use small 5 points
caps and don't use comma on your answer, use a single space only) *

5. Compressive strength of concrete can be obtained up to _______. (in psi 5 points

units)

6. How many days are needed for the concrete to be cured according to the 5 points

ACI code. *

https://docs.google.com/forms/d/1NmPzvUTMhsxNOD3Odf8br566Ow9ILYDhy1DLyhFQ4Bc/edit 1/5
3/16/22, 8:18 PM CE Elective 4 Prelim exam

7. The design f’c should be the average cylinder strength, but rather the 5 points
minimum conceivable cylinder strength. *

Mark only one oval.

True

False

8. Compressive strength of concrete is relatively low. * 5 points

Mark only one oval.

True

False

9. Most common tension testing methods for concrete are _____ and _____. (use 5 points
small caps and don't use comma on your answer, use a single space only) *

10. Lightweight concrete has lower tensile strength than normal weight 5 points
concrete. *

Mark only one oval.

True

False

https://docs.google.com/forms/d/1NmPzvUTMhsxNOD3Odf8br566Ow9ILYDhy1DLyhFQ4Bc/edit 2/5
3/16/22, 8:18 PM CE Elective 4 Prelim exam

11. Control of a structural design by shear strength is significant in all cases, 5 points

since shear stresses must ordinarily be limited to continually lower values. *

Mark only one oval.

True

False

12. The lower the strength of concrete, the higher the failure strain. * 5 points

Mark only one oval.

True

False

For questions number 11, 12, and 13.

https://docs.google.com/forms/d/1NmPzvUTMhsxNOD3Odf8br566Ow9ILYDhy1DLyhFQ4Bc/edit 3/5
3/16/22, 8:18 PM CE Elective 4 Prelim exam

13. 11. * 5 points

14. 12. * 5 points

15. 13. * 5 points

16. Maximum stone aggregate size (in mm.) to achieve 20,000 psi concrete 5 points
compressive strength. *

17. The effective modulus of concrete is directly proportional to the _____ of 5 points

concrete. *

18. Creep ration is inversely proportional to _____. * 5 points

19. ________ should impart the properties of low water content, good flow, 5 points

minimum bleed, and expansion if desired. *

https://docs.google.com/forms/d/1NmPzvUTMhsxNOD3Odf8br566Ow9ILYDhy1DLyhFQ4Bc/edit 4/5
3/16/22, 8:18 PM CE Elective 4 Prelim exam

20. ____________ should be formed with no constrictions which would tend to 5 points

block the passage of grout. *

21. _____________ involves the development of hoop or hugging compressive 5 points


stresses on a cylindrical containment vessels. *

22. Reduction of the prestressing steel are due to corrosion can drastically 5 points
reduce the __________ of the prestressed section. *

This content is neither created nor endorsed by Google.

 Forms

https://docs.google.com/forms/d/1NmPzvUTMhsxNOD3Odf8br566Ow9ILYDhy1DLyhFQ4Bc/edit 5/5

You might also like