Professional Documents
Culture Documents
PROJECT REPORT - Docx Bbit20
PROJECT REPORT - Docx Bbit20
PROJECT REPORT - Docx Bbit20
BACKGROUND OF CLIENT:
a) Name of organization:
The name of the organization is ” ”. We designed a network for IT department of
USA.
b) Location of organization:
The It department have a server room, faculty room, a computer lab that
accommodate almost twenty PCs, an IT lab with almost thirty computers, admin
office and HOD room.
It is located in Lahore, Punjab.
USA is an educational institute. IT department of USA have 80-100 computers
INTRO:
>MINAHIL WORK<
DESIGNED NETWORK:
These are all the devices (connecting and computing) and the wires that are used in
the network in order to make our network useful and in the working form in order
to achieve our desired goal from the network.
Task #03: Task 3: IP addressing Scheme:
IP ADDRESSES:
GW stands for the Default Gateway and DNS stands for the Domain
Name System IP address. So, the GW, DNS, Host name of the devices and IPv4 of
the devices are as follow:
ROUTER1: Host:
IP Address:
SWITCH1: Host:
GW: 192.168.1.254
SWITCH2: Host:
GW:
SWITCH0: Host:
GW:
SWITCH3: Host:
GW:
LAN: 192.168.1.0/24
LAN: 192.168.3.0/24
WAN: 10.0.0.4/30
(This above IP address is of Serial ports
between the both routers.)
WAN: 10.0.0.0/30
(This above IP address is of Gig ports
between the both routers.)
CONFIGURATION:
After adding all the devices and the wires in the network, we then
configure each device in the network in order to turn the connection between each
device in the network on.
ROUTER0 Network: In this, we used two Local Area NETWORKS
(LAN) which are connected to the router0. In that two LANs, each LAN has
one switch which is connected to the routers.
Switch1 is connected with the Router1 by the Gig0/1 port. Both of
these switches have 2 routers which are connected by the Ethernet ports to
the switches. Switch 2 then is connected with the Router1 by using the
Gig0/2 port and router0 is using Gig0/0 port.
Server is added in order to send emails in the Router1 network from one
device to another. We added all the PCs names and passwords in the email
option of the server (in the services tab). All the PCs also was configured in
order to connect to the server. We added the server DNS address in the PCs
email configuration option along with the PCs name and the passwords that
we added in the server. Same process is done with the Tablet, Mobile and
Laptop which is connected with the Repeater via internet.
All the PCs in the Router0 Network are in the Static Interface and all the
PCS in the Router1 Network are in the DHCP Interface.
Switch0 and Switch3 in the Router1 Network are connecter with each other
using Gig0/2 ports from both sides (means both switches are using the same
port).
In the end, Router0 Network and Router1 Network are connected with
each other using Gig0/1 ports and also with Serial 0/0/0 ports from both
sides in order to transfer message from one network to another and also to
ping with each other.
>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Prices
Router (2)
Rs 57,456 [Rs. 114,912]
A router is a device that communicates between the internet and the
devices in your home that connect to the internet. As its name
implies, it “routes” traffic between the devices and the internet.
3 switches
24-port= Rs 20,500 [Rs 61,500]
A switch is used in a wired network to connect to other devices
using Ethernet cables. The switch allows each connected device to
communicate to the other device 1 server
>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<
1 access point
Rs 3322
An access point connects to a wired router, switch, or hub via an
Ethernet cable, and projects a Wi-Fi signal to a designated area
>>>>>>>>>>>><<<<<<<<<<<<<<<<<<.
6 server
Rs 55,000 [Rs 330,000]
The server is the computer that is providing information or services
to the other computers.
PCs (18 PCs)
PC= Rs 59,160 [ Rs 1,064,880]
Printers (3)
Rs= 35,500 [Rs 106,500]
WORKING:
Working of the network is that we can send message from any PC of the
one router network to another router network pc. We can also send emails in the
router1 network from one computer to another. But we can not send email from
router1 network device to the router0 network device. But if we modify the
network a little we can also send emails between both router network devices.