Professional Documents
Culture Documents
TN526D V1 LUST ServoC E0
TN526D V1 LUST ServoC E0
Version 0.0
November, 2008
◎Revision Record
Revision Date Content Owner
www.cermate.com
TND526-E0
Preface
This tech note introduces how to connect LUST ServoC controller with PanelMaster
HMI.
Page 2 of 9
www.cermate.com
TND526-E0
Page 3 of 9
www.cermate.com
TND526-E0
(d) When you link with the LUST controller, please set the User Level to: Develop Engineer (6).
(Initial Password is “678”)
(e) At this moment, please enter “Extras --- Parameter Editor” and set the RS485 value as “1”
to enable the RS485 communication.
Page 4 of 9
www.cermate.com
TND526-E0
NOTE:
If you enable the RS485 communication, the USB port will not be linking with
TXD + 1 5 DATA+
TXD - 6 4 DATA-
GND 5 3 GND
9 DC +24V
6 DC 0V
Page 5 of 9
www.cermate.com
TND526-E0
TXD + 1 5 DATA+
TXD - 4 4 DATA-
GND 5 3 GND
9 DC +24V
6 DC 0V
NOTE:
If you wish to use the RS485 to link with the HMI, the X5 connector meeds to
Page 6 of 9
www.cermate.com
TND526-E0
Series】
Page 7 of 9
www.cermate.com
TND526-E0
Word Devices:
~Thank You~
Page 8 of 9
www.cermate.com
TND526-E0
Phone: +86-21-51758590~2
FAX : +86-21-51758589
E-mail: service01.sh@cermate.com
Phone: +86-755-83562179,
FAX : +86-755-83562294
E-mail: sa-cermate@cermate.com
Page 9 of 9
www.cermate.com