Professional Documents
Culture Documents
ProWall EX
ProWall EX
ProWall EX
34 32 30
W W
C-Stud Cross Section U-Track Cross Section
*For economical Partition Metalprofile, size 50, 65, 75 mm, we suggest PlusWall Partition 0.40 mm thickness (no. 26)
ProWall Partition Metalprofile
Elephant Brand
Features
Strong & safe : Manufactured from high quality, certified cold-rolled
galvanized steel of 0.52 mm gauge by Thai Standard
863-2532. Specially designed profile
increases system strength.
Easy & Fast Installation : Easier and faster installation than traditional systems,
modern manufacturing technique ensures high
manufacturing precision.
* Corrosion is one of the main factors affecting suspended ceiling safety since metal profiles are not seen
after completion of ceiling work. There is no warning of insecure ceiling. All Metal Profiles, Elephant Brand,
gain a corrosion-resistant with minimum (zinc coat) galvanizing of 220 g/sgm (Z22), which is thicker than
80% of similar profiles in the market (120-180 g/sqm, Z12 – Z18). The corrosion test can only be made in
the laboratory, but we can hold an easy comparison by putting 2 types of metal profile into salt water and
measure how long they become rusty.
ProWall Partition Metalprofile
Elephant Brand
Uniqueness of ProWall Partition Metalprofile, Elephant Brand
20 CM.
ë Arrow printed at every 20 cm. along the metal
profile length, easy to install
Component of ProWall
Partition System
Elephant U Track
1. Elephant C-Stud
2. Elephant U-Track
3. Elephant Truss Head Screw 10 mm.
4. Elephant Gypsum Board 12 mm.,
15 mm., or 18 mm.
Elephant C Stud
Elephant U Track
Variety of application
ë Apply for a box stud by putting 2 C-Lines ë Tailor-made partition is available for ordering e.g.
together in order to enhance more strength tailor made length C-line or a thicker metal C-Line
of partition.
200 mm.
200 mm.
1 m. - 6 m.
Putting 2 C-Lines together
Elephant C Stud
Plug
ProWall Partition Metalprofile
Elephant Brand
Installation Method
3 Insert ProWall C-Stud into ProWall U-Track, then twist to lock at every 60 cm. intervals (In order to allow
adjustment when fixing plasterboard, C- Stud should not be screw fixed to U-Track). No need to install
Cross Runner except in door frame or built-in furniture area.
4 Fix plasterboard to partition with Drywall Screws at 5 Plaster the plasterboard joints with Elephant brand
every 30 cm. intervals at the middle of board and EasyPlas120 according to compound instructions.
at 20 cm. intervals at the edge of board
ProWall Partition Metalprofile
Elephant Brand
General Installation
Magic Bead MP001, TrimTex, Square Standard Bead
Elephant Brand SB001, TrimTex,
Elephant Brand
Gypsum Board 12 mm., 15 mm., or 18 mm.,
Elephant Brand Square Bead MP001, Trimtex,
Elephant Brand
Elephant C-Stud Magic Bead MP001,
TrimTex, Elephant Brand
Pro Wall Angle,
Elephant Brand
Pro C-Line (no.24),
Elephant Brand
Gypsum Board 9 mm.,
Elephant Brand
Magic Bead
10 Shadow Bead MP001, TrimTex, L Bead OB00L, TrimTex,
OB00S, TrimTex, Elephant Brand Elephant Brand
Elephant Brand Elephant C-Stud
Partition - Partition
Elephant C-Stud
Gypsum Board 12 mm., 15 mm.,
Expansion Bolt 6 mm., or 18 mm., Elephant Brand
Elephant Brand Elephant U-Track
L Bead OB00L, TrimTex, L Bead OB00L, TrimTex,
Elephant Brand Elephant Brand
Sealant
Elephant C-Stud Elephant C-Stud
Specification
Wall & Partition Metal Profile - Elephant Brand
Use Elephant Gypsum Board 12 mm., 15 mm., or 18 mm.,
Gypsum Board 12mm., 15 mm., or 18 mm.,
Elephant Brand size 1200x2400 mm.
ë Standard Board for interior general using, certified by
Elephant C-Stud
TIS 219-2524, ASTM C 36, BS 1230
ë FireBloc for fire-resistance property, certified by ASTM
E 119, BS 476 Part 22
Sealant Use ProWall Partition Metalprofile Elephant Brand certified
L Bead OB00L, TrimTex, by TIS 863-2532. Material made form Hot Dip Zinc-Coated
Elephant Brand
Steel (SGCC) complying with TIS 50-2538 and JIS G 3302.
Expansion Bolt 6 mm.,
C-Line 0.52 mm. thickness (TCT: Total Coated Thickness),
Elephant Brand with Zinc Coating amount 220 g/SqM (Z22), variable size of
C Stud and U Track: ProWall C50 & U52, ProWall C64 &
U66, ProWall C74 & U76 and ProWall C92 & U94. Fixing
Partition - Floor with Elephant Truss Head Screw 10 mm. and accessories
following standard of
The Siam Gypsum Industry (Saraburi) Co., Ltd.
ProWall Partition Metalprofile
Installation Suggestions Elephant Brand
ë When screwing at the edge of the board, start screwing from ë When screwing at the middle of the board, screwing
the outer of the C-Stud then the inner in order to avoid the closest to the C-Stud body
bending the stud.
Screwing at the middle of
the board
Right screwing direction
ë When installing the first board, screw at the edge (position 1
Right screwing direction and 2) then install the board on the opposite side by screwing
at its edge (position 3) and at the middle (position 4), then
screwing at the middle of the first board (position 5).
3 4
Q&A
1. Why C and U stud have a range of width? How to choose?
ë Variety width of C & U Stud offered so that you can choose the one that fits to the size of door frame and window
(which have many sizes). Moreover, the stud that wider and thicker can support a higher partition.
2. How many methods to fix the gypsum board to the stud partition? Which method is the most efficient?
ë Now there are 3 methods, which are
1) Riveting. The most popular method since it uses the same equipment of fixing aluminum stud. But riveting makes too many
steps which consumes time. Moreover, it is less strong than screwing and crimper.
2) Screwing. Faster and stronger but could be a little more expensive than other method.
3) Crimper. Easiest and fastest, still economy since it does not require any other accessories. But this method could be difficult
if work on a thick metal stud.
3. Is it possible to use screw for fixing the gypsum board to the stud for fixing the studs together?
ë No. It is not recommended using screw for fixing gypsum board to the stud for fixing the studs together because it is designed
to have leaned base in order to catch the gypsum board firmly. But it could loosen if fixing between studs. We suggest using
screw for studs only to fix the studs together.
PlusWall