Professional Documents
Culture Documents
XLPE Cable-Current Rating - Electrical Notes & Articles
XLPE Cable-Current Rating - Electrical Notes & Articles
UN-ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 1/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
ARMOURED CABLE
UN-ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 3/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 4/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
UN-ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 5/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
1.1 KV Three CORE AL/COPPER COND., PVC INSULATED CABLES As per IS:1554 (Part-I)
ARMOURED CABLE
UN-ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 6/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
1.1 KV Three & Half CORE AL/COPPER COND,XLPE INSULATED As per IS:7098(Part-I)
ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 7/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
1.1 KV Four CORE AL/COPPER COND,XLPE INSULATED CABLES As per IS:7098 (Part-I)
UN-ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 8/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
4cX 120 41 225 185 258 285 240 330 11.28 17.16
4cX 150 45 255 210 294 315 270 375 14.10 21.45
4cX 185 50 285 235 339 355 300 435 17.39 26.46
4cX 240 56 325 270 402 410 350 510 22.56 34.32
4cX 300 63 370 305 461 460 390 590 28.20 42.90
4cX 400 70 435 350 542 520 440 670 37.60 57.20
4cX 500 79 481 405 624 580 480 750 47.00 71.50
4cX 630 88 537 470 723 680 575 875 59.22 90.09
1.1 KV Four CORE AL/COPPER COND,XLPE INSULATED CABLES As per IS:7098 (Part-I)
ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 9/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
4cX 300 68 370 305 460 460 390 590 28.20 42.90
4cX 400 76 435 350 542 520 440 670 37.60 57.20
4cX 500 86 481 405 624 580 480 750 47.00 71.50
4cX 630 94 537 470 723 680 575 875 59.22 90.09
About these ads (http://en.wordpress.com/about-
these-ads/)
About Jignesh.Parmar
Jignesh Parmar has completed his B.E(Electrical) from Gujarat University. He has more than 11 years
experience in Power Transmission-Power Distribution-Electrical energy theft detection-Electrical
Maintenance-Electrical Projects(Planning-Designing-coordination-Execution). He is Presently associate
with one of the leading business group as a Assistant Manager at Ahmedabad,India. He is Freelancer
Programmer of Advance Excel and design useful Excel Sheets of Electrical Engineering as per
IS,NEC,IEC,IEEE codes. He is technical Author for "Electrical Mirror" and "Electrical India"
Magazines. He is Technical Blogger and Familiar with English, Hindi, Gujarati, French languages. He
wants to Share his experience & knowledge and help technical enthusiasts to find suitable solutions and
updating themselves on various Engineering Topics.
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 10/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Reply
Jignesh.Parmar says:
May 24, 2011 at 4:02 pm
I have already given in XLPE, PVC Cable section
Reply
senthil kumar says:
November 20, 2012 at 6:33 am
Hai good morning, You have done a good job. it’s very useful to me. Thank you
Arul says:
December 17, 2012 at 9:53 am
Ur information is very useful thank you
Reply
p.vadivel says:
August 10, 2011 at 3:08 pm
dear sir,
ratinng cable size of 300kva to 450kva trasformer.
Reply
shafeeq says:
August 16, 2011 at 10:12 pm
dear sir,
thanks.can you please give details of selecting UPS and generators rating.
Reply
Ramchandra B Damle says:
October 12, 2011 at 4:25 am
Dear Sir
Will you please furnish me short time ratings of HT XLPE insulated cables e. g. 10% for XXX Hrs.,
20% for XXX Hrs. and so on ?
Reply
SHAMAUN HAKIM says:
October 26, 2011 at 1:52 am
Can a 10 guage XPLE insulated copper wire used as leads for oil immersed CTs withstand around
90 deg C continously in transformer oil? What is the compatability of XPLE wire with transformer
oil? What is the specific density of XLPE insulation?
Reply
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 11/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Reply
paulson says:
November 25, 2011 at 11:09 am
can you tell me the voltage drop calcultaion of 11KV XLPE cable around 600m long
Reply
Jignesh.Parmar says:
November 27, 2011 at 3:51 pm
Use Excel Base Program to Calculate LT-MV-HT Cable from “Electrical Tool” Page of This Blog
DOWNLOAD:
Reply
paulson says:
November 30, 2011 at 6:40 am
Mr Jignesh,
I heard that above 630A we should use ACB ,but MCCB’s are available till 1600A.
So can you tell me from which rating we have to go for ACB and VCB
Thanking you,
Paulson
karuppanasamy says:
January 7, 2014 at 3:50 pm
i am engaged in arecanut leaf plate manufacturing activity which need heaters with die of
8000 watts.what specification of power cable can i put.
Reply
Jignesh.Parmar says:
December 8, 2011 at 5:18 pm
This Topic is already covered.Read Electrical Notes Carefully
Reply
nirav shah says:
August 14, 2013 at 3:13 pm
Dear Jignesh, I am nirav shah from hyderabad. i would like to know what is the difference
between current carrying capacity for xlpe insulated single core copper flexible cables for AC
and Dc applications. Benchmark being single core 240sqmm which can carry upto 550amps
in AC application.
Udaikiran says:
January 18, 2012 at 7:51 am
Dear Sir,
Details furnished by you are excellent.Sir, i need to buy the unlock version .Did you published any
books on cable sizing,busbar calculation, breaker designing etc?My maid id is
udai_kiran1983@yahoo.com
Reply
randy addae junior says:
October 17, 2012 at 9:53 am
please can i get a copy of your book in ghana?
Reply
ramkewal says:
January 29, 2012 at 7:06 pm
sir, i read to this cable size and current rating chart it is very use full for us so i request u please send
this chart in my Email
RAMKEWAL
Reply
ramkewal says:
January 29, 2012 at 7:09 pm
i will be hope full with this chart
Thank you.
RAMKEWAL
Reply
Ronald Mutambiranwa says:
February 1, 2012 at 1:27 pm
Reply
Babji Duvva says:
March 22, 2012 at 10:57 am
can you please provid me for the current rating for 1C X 185 SQ MM copper cables
Reply
Jignesh.Parmar says:
March 22, 2012 at 3:48 pm
It is already Given on the following Post
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/
Reply
Babji says:
March 23, 2012 at 4:01 am
sorry i want the current carrying capacity in DC power( 750 V, and 440 V )
Thank you.
nmr says:
April 1, 2012 at 11:56 am
11kv/433v TFP-1000 kva/500kva/750kva the fl currents on LT side are 1333.3/1000/666.6 amps.
what is size of 4 core xlpe alluminium is used pl tell me.
Reply
Jignesh.Parmar says:
April 1, 2012 at 12:33 pm
Download Excel base Sheet to decide Cable Size from “EXCEL TOOL” page.
To decide Cable Size We need two important Data
(1) Load
(2)Distance.
Reply
vamsi says:
August 22, 2012 at 7:17 am
this chart about cables is nice but give us some information about OH cables, and underground
cables .
Reply
d s negi says:
October 5, 2012 at 9:22 am
WHAT IS THE BIS – IS CODE FOR 11 KV CROSS ARMOURED CABLE
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 14/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Reply
Azad Anupam says:
October 16, 2012 at 2:26 pm
Very useful….
Reply
Mohammed says:
November 1, 2012 at 4:54 pm
Dear Jignesh,
Your cable selection table is very helpful. But i’ve a question to clarify? how do we determine the
cable current capacity of cables running in parallel? for example if my breaker is rated at 1000A,
what size of cable conductor should be terminating at the terminals per phase, can i terminate 2 x
1c x 400 per phase or how do we decide the conductor sizing? as i understand there is a derating
factor of cables when connected in parallel? may be you can ellaborate further and may be send me
details on the cable sizing formulation and other useful data on my email : manjarwalla@gmail.com
Reply
Jignesh.Parmar says:
November 1, 2012 at 5:03 pm
Use Equation
% Voltage Drop:=(1.732 X (Full Load Current)X(RCosØ+j SinØ)XLengthX100) / Line Voltage X
No of Run X 1000.
Here No of Run cable is Either 1,2 or more in parallel.
You can also use “Cable Design” sheet of the Excel Tool Page of this Blog
Reply
Mohammed says:
November 1, 2012 at 5:55 pm
Dear Jignesh,
Thank you for your prompt reply. I’ve also gone through your cable design excel
sheet,wonderful program. On the cable design program how do you determine the starting
and running cos and sin thetha? do you have any thumb rule for calculating the cable runs
in a faster way? for example if my full load current is 1000A as incomer or any feeder load
connected to my panel. As from the program i’ve to input the the respective KW to attain
nearest full load current before i can get the runs of cables?
B.R.Suryawanshi says:
November 3, 2012 at 8:10 am
Dear Sir,
Plz.tel me this XLPE cables can we use 100% loading? for How much length cables are de rated?
Thanks.
Reply
Jignesh.Parmar says:
November 3, 2012 at 5:03 pm
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 15/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
this Rating is as per Standard Cable Catalog and IS. Cable Rating never indicate derating factor.
Because Derating Factor depends upon Your Application.
It is depend upon Type of Laying Cable –
=In Air,Land, at 0.500mt depth at 1 meter depth,
=Air-Land Temperature,
=in bundle,=In separate,Distance between two Cable, etc.
If Cable Rating is 100 Amp It may be 80 Amp or 90 Amp or 100 Amp depend upon Laying of
cable.
Reply
A. A. Mahadik says:
November 22, 2012 at 7:13 pm
Pl. send me LT cable current carrying capacity charts
Reply
Jignesh.Parmar says:
November 23, 2012 at 2:05 pm
Already available on this Blog . Please Refer Post of “PVC Flexible Wire Rating”
I have already Put Cable/Wire Rating Starting from 430V to 66KV (Earthed/Unearthed Cable)
Reply
lal bahadur chand says:
December 19, 2012 at 7:35 pm
Varry importent for me this. Site
Reply
shine says:
February 26, 2013 at 12:23 pm
Good work, its very useful
Reply
hariharan.v says:
March 7, 2013 at 6:44 pm
sir,if i have 7.5kw unit then how can i select cable for that unit with out using chart.give me that
formula for me.
Reply
Jignesh.Parmar says:
March 8, 2013 at 2:12 pm
Use Cable Size Program of this Blog. (Formula is given in the Program)
Reply
zahid says:
March 10, 2013 at 12:22 pm
well done sir you have a great job and sacrifices for Electrical Engineering.
Reply
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 16/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Hareesh R says:
April 20, 2013 at 7:53 am
Hi,
I really appreciate your effort to share consolidated information..
Reply
sulaimant says:
May 3, 2013 at 6:33 pm
dear
sir/madem
pleas send me cebel formula for given voltag and
also send me cabel and amp tebal
Reply
Jignesh.Parmar says:
May 4, 2013 at 2:40 pm
Download Cable selection Program from this Blog..here You can find Formulas and Table
also…
Reply
Jayaprakash.N says:
May 22, 2013 at 4:34 pm
It is very useful informations… Gr8
Reply
Ribhu Gaur says:
May 23, 2013 at 7:39 am
what is the thumb rule for above calcualtions..? please share the formula for approximate current
ratings in 1.1 kv XLPE cables .
Reply
kuruvilla says:
June 26, 2013 at 9:38 am
Mr. Jignesh, can you please tell me what size of cable is required for solar installation. My panel
rating is Isc=8.5 A, Voc=36.5 V. I’m using two series panels in 3 arrays, basically an 2×3 system.
Thanks. Length one way will be 30 feet from panels to inverter.
Reply
Nasir says:
July 9, 2013 at 5:43 pm
400 volt,528 amp and insulation xlpe ,cable size required
Reply
vinod pol says:
August 1, 2013 at 10:08 am
hiii sir, thanx for this information but sir pls tell me the formula or any thumb rule for calculating of
cable/wire size as per given load…..
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 17/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Reply
Abdul Guffar says:
August 23, 2013 at 10:51 am
Thank you for this cable selection chart. Do u have any information about conductor,s DC current
carrying capacity .Please mail me sir, Thank u.
Reply
prabhakar says:
August 29, 2013 at 5:45 am
sir
can u tell me the formula how to calculate the cable sizes corresponding amps..
Reply
mintu kumar pandit says:
September 22, 2013 at 8:15 am
why use mastic tape for 11 kv cable joint,please tell me sir.
Reply
Mintu Kumar Pandit says:
September 24, 2013 at 5:24 pm
Dear sir,
what is the function of cable fillers ? please reply.
Reply
Mintu Kumar Pandit says:
September 24, 2013 at 7:18 pm
sir ,
difference between round shape cable and delta shape cable please me understand
Reply
mintu kumar pandit says:
October 4, 2013 at 10:41 am
whats type of 11kv spout ?
Reply
Anees Mustafa says:
October 4, 2013 at 1:18 pm
electrical infrastructure construction Q&A for exp houseing scheme what are requrment of
houesing scheme of all utlates and what are gape electrical serviese between water ,sewg,gas
and other serviese in under ground
krishnamurthy says:
November 2, 2013 at 2:11 pm
How to measure currenraings of armed & unarmed cables
Reply
krishnamurthy says:
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 18/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Reply
Anil Thomas says:
November 16, 2013 at 7:48 am
I want to know that whats the current carrying capacity for 4 runs of 3.5 core 400 Sq.mm
Al. armoured XLPE cable in ground . How it can be calculate. ( please send a copy of tables
if any )
which means if 3.5 core 400sq.mm cable carries 370 amps in ground and when it is 2 runs it
will not be double of 370. it will less than double. how it will calculate ???
Jignesh.Parmar says:
November 16, 2013 at 5:10 pm
You are mixing two different topic ..
(1) If we laid cable in ground,air or trench it’s current capacity will be decrease due to
surrounding temp.
(2) If we laid cable in group / single it’s current capacity will be decrease those effect called
“derating factor of cable..
You find in Electrical Tool page.
If we run two cable for same phase obviously it’s capacity would be double…
KRISHNAMURTHY says:
November 17, 2013 at 1:57 pm
How to measure capacitance&inductance in A.P.Transco meters and send formula of
KW&KVAR&KVA.
Reply
bj vijay says:
November 15, 2013 at 4:12 pm
Hai …
Reply
John says:
November 18, 2013 at 10:02 am
Dear Sir,
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 19/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
My doubt might sound silly to you, but I just wanted to clarify it. From the given cable ampacity
ratings in the tables above, how can we calculate the maximum power rating for the respective
multi-core cables.
Thank you.
Reply
Jignesh.Parmar says:
November 18, 2013 at 2:38 pm
Given Rating are single and Multi core cable..
Reply
John says:
November 18, 2013 at 5:50 pm
For example: for a 4 core 120 sqmm Aluminium conductor cable, what is the maximum
power capacity? Should we multiply the given ampacity with single phase voltage or 3
phase voltage to find out maximum load it can handle?
Jignesh.Parmar says:
November 21, 2013 at 5:26 pm
Use “Cable Size Calculation” sheet of this Blog
Regards,
Suresh Chaudhary
Reply
bikram kaushik says:
November 20, 2013 at 6:57 pm
there is no any power rating of cable.only current rating of cable are mentioned.power rating is
concerned to the equipment.
Reply
Shruthi says:
November 27, 2013 at 7:08 am
Dear Jignesh,
Sir what’s the formula to select the cables sizes for the particular current ratings?
Reply
Jignesh.Parmar says:
November 27, 2013 at 2:21 pm
Refer “Cable Size” Excel base program from “Electrical Tools” Page
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 20/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Reply
Masoud Bu-Arbyay says:
December 4, 2013 at 8:08 pm
You did good , its very useful
Reply
mohamed says:
December 10, 2013 at 7:58 pm
dear jignesh how to calculate the busbar size in 630amps breaker 3ph ?
Reply
Manoj Patil says:
February 10, 2014 at 1:52 pm
Dear Sir
Reply
sunil says:
February 13, 2014 at 7:12 am
Dear Sir,
Can you explain that the current rating you have mentioned in Ground ,Air, or duct is quite
opposite to what manufacture state in their product catalogue.
regards
Reply
Perumalkonar says:
February 21, 2014 at 8:27 am
how many runs of 3.5C 240 sq.mm al. conductor xlpe pvc insulted cables to be laid to supply to a
circuit which is maximum current draw is 800 A.
Reply
Jignesh.Parmar says:
February 21, 2014 at 5:44 pm
Distance !!!! Use Excel Cable Size Calculation sheet of this Blog..
Reply
shree raja says:
February 21, 2014 at 2:00 pm
Yes very use full.thank you.
Reply
venu says:
February 23, 2014 at 12:01 pm
Sir,
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 21/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
please let me know the current carrying capacity of 3C*2.5 sqmm copper cable in air.
Reply
karan says:
March 10, 2014 at 10:36 am
sir,
if i want to select power cable for 2o hp motor. and i am going to use 3 core alluminium cable.
then what will be the cable size?
Reply
brijmohan says:
April 25, 2014 at 12:40 pm
sir
3.5core 50 sqmm ki cabel par fes kitana amp legislative
Reply
manoj singh says:
April 15, 2014 at 7:58 am
sir,
if i want to select 50sq cable for 11kv. and i am going to use 3 core cable.
then what will be the cable size?
Reply
Fetsum Asayehegn says:
April 16, 2014 at 9:32 am
your table is very useful, thank you and I need the cable size of 22 kw, 3ph, 380volt for my deep
well pump motor at a deep distance of 300 metrrs
Thank you & best regards,
Fetsum
Reply
PETER BIBIN M J says:
July 23, 2014 at 5:38 am
thanks for this great cable chart…
Reply
Fadi says:
July 27, 2014 at 6:23 am
Hi
Can I know how many runs of single core 630 mm are required for a 1000 KVA transformer ?
Reply
Blog at WordPress.com.
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 22/23
8/20/2014 XLPE Cable-Current Rating | Electrical Notes & Articles
Follow
Powered by WordPress.com
http://electricalnotes.wordpress.com/2011/04/24/xlpe-cable-current-rating/ 23/23