Professional Documents
Culture Documents
Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Search
(http://www.shinjovalve.com/)
EMAIL US CALL US
sales@shinjovalve.com (mailto:sales@shinjovalve.com) 86-21-5620 6641 (tel:86-21-5620 6641)
Home (http://www.shinjovalve.com/)
/ NEWS & DATES (http://www.shinjovalve.com/news.html)
The ball valve is an essential device for regulating the flow of fluids- steam, gas, or oil in pipeline. It
is quarter-turn designs with a ball capable of rotating 90 degrees on its axis to either block or allow
the flow of fluid. These valves have a spherical disk design at the center, which rotates to regulate
the start-stop flow cycle. The disk often called the ball comes designed with a small protruding shaft
at the top and bottom which are mechanically supported. In this case, flow is controlled
Leave a messageby the x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 1/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
position of a hole in the center of the ball. For their versatility, Trunnion mounted ball valves are
useful in industries where such shut-off operation is required.
The Trunnion ball valves have adequate backing for the ball. The support is in shape similar to a
shaft, and it's called a trunnion. The Trunnion soaks up any additional pressure coming from the
flow, thereby lowering the pressure on the valve seat and the ball. Trunnion mounted ball valves find
their use in large-scale implementations that require low operating torque.
Trunnion valve is a device that controls the flow of fluids in pipelines by regulating the shut-off cycle.
It contains the elements necessary for enabling or disabling the flow of fluids through the pipe. It is
built to integrate pipe or tube sections to actualize this function.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 2/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
The Trunnion ball valves have a structure similar to the traditional ball valves seen around. The
difference it brings is that the ball valves have more mechanical anchors to support the ball. The ball
is given solid support from the two ends on its x-axis. It holds it in place and makes it very easy to
control.
In the trunnion mounted ball valve, the design comes with dismal tended shafts at its top and
bottom, which are mechanically supported. With this, it is made suitable for larger diameters and
higher pressure. In the Trunnion mounted design, the ball is kept in position by compressing the
seat rings at the two ends.
The ball, for its flexibility, enables a good measure of movement. While in use, it floats moderately
downstream towards the seat ring to make a sealing. If the loads on the floating ball are much
higher, the seat rings won't be able to give the needed support to the ball. This is when the power of
the trunnion comes in. In a trunnion design, the seat rings are the parts floating against the
traditional design where the ball floats.
Body
The valve's body is the casing that holds it in place and offers support to the interior of the ball valve.
The material for this design can be made of different products depending on the type of application it
is used for. Some of the commonly used materials are carbon steel, low-temperature carbon steel,
stainless steel, duplex, Inconel, and super duplex.
Ball
This is a sphere ball shaped disk through which it rotates to stop or start flow in a solid rotational
motion. It is connected to the Trunnion at one end and the stem at the other end. The ball is fixed in
a position while it rotates. The trunnion ball valve's seats are often in contact with this ball, which
reduces the torque.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 3/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Seat
The seat of the Trunnion ball valve is a design feature that surrounds the ball. When the actuator
gets turned on, the seats keep the ball tightly in place, blocking off access. There are two types i.e.
metal or soft (Teflon). This makes it move in the direction of the ball.
Trunnion
There is an extra shaft in the trunnion ball valve that grips the ball in position from beneath. This
simple shaft is the Trunnion. Its function is to keep the ball firmly attached. Sometimes, the Trunnion
is an extension of the spherical ball, whereas, in other trunnion-mounted ball valves, it is attached to
the spherical ball disk via welded joints.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 4/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Stem
The stem of the trunnion ball valve helps connect the ball and the actuator together. It is connected
to the ball an additional shaft that helps secures the ball in place. Also, it regulates the ball's
movement. Trunnion-mounted ball valves have strengthened anti-blowout stems, which is why they
are able to handle pressurized and intense temperatures without causing any damage.
Injection
Injection fittings are designed in the seat and stem area. When sealing is compromised, and
leakage is caused, the grease can be injected via a sealant injection fitting. The injected sealant
functions as a partial seal to stop further leakage.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 5/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
However, it must be noted that the sealant injection fittings are for emergency purposes only.
The trunnion ball valve is designed by API6D or API608, and conforms to industry required
standards such as ASME B16.5, ASME B16.34 and ASME B16.10. They are built to be fire resistant
according to API 607.
5. Typical Material
The Trunnion ball valve is accessible in forged or cast body materials (split or monoblock). Forged
structures are often used for valves of high-pressure and larger bore sizes.
5.1 Typical materials for trunnion mounted ball valve design include:
A. Body/Closures-- F304L, A105, A182 F304, F316, F51, F316L, F53, A350 LF2, LF3, Inconel,
Monel, Hastelloy( Forging), A351 CF3, A351 CF8, A216 WCB, A351 CF3M, A351 CF8M, A890 4A/
5A, A352 LCC/ LCB (Casting).
B. Ball- CS+ENP, F304L, F316, A182 F304, F316L, F51, CS+TCC, CS+N i60, F53.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 6/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
C. Seat retainer- A182 F304, CS+ENP, F304L, F316, F51, F53, F316L, CS+N i55, CS+TCC.
PTFE: Virgin PTFE is by far the most commonly used sealing material of exceptional quality. It has
attributes suitable for most services. It's of outstanding chemical resistance across the valve and
also has low friction coefficient.
RPTFE: RPTFE (known as Reinforced PTFE) is usually created by adding 15 percent of fiberglass
to virgin PTFE. It has improved pressure-temperature capabilities than the virgin PTFE and comes
with enhanced wear resistance. It is effective against deformation when on load.
PCTFE: PCTFE is a chlorotrifluoroethylene homopolymer with high tensile stress and have a low
deformation when on load.
Nylon 6: Nylon is a rising seat material for Valves of Class 600. It is extremely robust and can be
useful in oil, air, and other media. It is appropriate for strong oxidizing agents.
Devlon: Devlon is a strong molecular weight polyamide especially suited to high temperature and
pressure applications in the gas and oil industry. In addition, it is a minimal moisture absorption
material.
PPL: PPL( Polyparaphenylene) is an exceptional seat material which has a low coefficient of friction.
It can withstand extreme pressure and also temperature resistant.
TFM: TFM (modified PTFE) is an improved chemical-modified PTFE design with improved
properties whilst retaining the proven benefits of conventional PTFE.
Metal: Metal (typically stellite) seats are employed in situations of hydraulic shock, flashing abrasive
media, and in extreme situations.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 7/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
NBR Buna-N: NBR Buna-N (NBR) is a durable and all-purpose polymer of hard water, oil, solvent,
and hydraulic fluids.
HNBR: HNBR (Hydrogenated NBR) can be compared to NBR in terms of media stability but comes
with much better oxidation and heat stability.
Viton: Viton (fluorocarbon) is an elastomer of fluorocarbons that is compliant with a wide variety of
chemical Substances. It produces strong performance in mineral acids, chlorinated hydrocarbons,
salt solutions, and petroleum oil.
EPDM: EPDM has good resistance to abrasion and tear, with outstanding chemical resistance to a
range of alkaline and acids. This is susceptible to oil, strong acids, and strong alkaline and should
not be applied in compressed airlines.
FVMQ Fluorosilcione: FVMQ Fluorosilcione is a fluorinated side-chain silicone polymer chain for
better oil resistance. The physical and mechanical properties closely mimic those of silicone.
These and many more some of the typical materials used for the design of the trunnion ball valve.
There are many features of the trunnion mounted ball valve. Among the major ones are:.
Emergency Seal.
For a trunnion mounted ball valve, it is designed to have a sealant injection at the seat and the stem.
In the event of a failed seal, a temporary emergency seal could be achieved via injection sealants.
Antic Static.
For the reason that the stem and the ball of a trunnion ball valve are suspended on non-metallic
parts, there is the likelihood of a static charge building up on the stem/ball. For this, an antistatic ball
and metal spring are included in the design to retain the metal-to-metal contact
Leave awithin the rotating
message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 8/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
stem or ball and the valve body that helps to ground the charges to the design's valve body.
The stem of the trunnion valve is made with a shoulder at the end of the bottom. It is secured by the
filling box in the event that the stem in certain working conditions mistakenly blows out. There are
various designs for this.
Fire-safe design.
The trunnion ball valve design is tested and certified fire-safe, thus preventing fire spread and
prevent environmental pollution. The product is tested and found to be in accordance with API 607
or API 6FA.
The body configuration features tell how a ball valve can be used and the ease of repairs and
maintenance. Based on these parameters, three types of trunnion ball valves will be examined:.
This type of design is also referred to as the split body trunnion mounted ball valve. It assembles its
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 9/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
ball from the side. They are often made out of forged metal. In this design, the body is often divided
into three or two pieces that are joined together like extensions. A piece of the body is most often
bigger than the rest of the design. This larger piece holds the stuffing that winds around the ball and
the ball itself. For this design, they are easily repairable and can be inspected as the smaller piece
can be pulled out to access the valve.
Advantages.
They offer the advantage of reliable performance, compact envelope, and a cost-effective solution.
Disadvantages.
This trunnion valve is a unique design that assembles the ball from the top. They are mostly made
from casting metal.
The ball valve is designed with a removable bonnet cover atop the ball valve. The interior parts can
be accessed easily by removing the bonnet. The valves are easy to disassemble and assemble.
The maintenance and repair of the trunnion ball valve can easily be done by pulling it out from the
pipeline.
Advantages.
It is lightweight design.
Disadvantages.
Possess poor regulating and throttling capabilities due to its design for shutoff and not flow
modulation.
It is prone to cavitation.
This design is mainly an application for the transmission of gas in buried pipelines. They are larger
sizes of about up to 60 inches. They have medium pressure classes as much as ASME 900 psi. The
RAM material for the design can either be centrifugal casting or forgings. They are made of a variety
of materials, including martensitic SS and carbon steels. The valves major technical features include
anti-blowout stem and a valve seat design accessible in three various design patterns of:.
DPE (Double Piston Effect): here, the seat may be energized by either upstream pressure or via
body cavity pressure.
SPE (Single Piston Effect): In this design, the seat can be energized by upstream pressure and no
other.
DUAL (SPE upstream and DPE downstream): It combines the two-seat designs described above. A
double blockade can be guaranteed in case of failure of seat sealing.
Advantages.
Disadvantages.
A bore in a ball valve is the hole present in the ball's center. There are two types of this design for
trunnion ball valves based bore size.
In the case of full bore trunnion ball valves design, the diameter of the bore aligns with the
connected pipeline. When the valve gets opened, the medium could flow with no hindrance from the
bore. They are useful in areas or plants where pigging is needed.
Advantages.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 11/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Disadvantages.
A reduced bore valve is a design that has a bore size lesser than the connected pipeline's diameter.
The flow path of the channel is limited and results in greater energy loss. They are applicable to the
gas and oil industry.
Advantages.
Disadvantage.
A ball valve comprises two styles of the seat, soft seated, and the metal seated. Soft seat trunnion
ball valves are seated using a thermoplastic material such as PTFE and Devlon. Metal seated ball
valves make use of metals as seat material like Inconel and Hastelloy. The type of ball valve seat
has its own feature and thus has its own advantages and disadvantages.
Soft seats are typically constructed of thermoplastic substances such as PTFE. They are great for
environments where chemical compatibility is necessary and the environment where the tightest
seal is essential.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 12/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Nevertheless, soft seats should not be used in dirty or abrasive liquids. Under such conditions, soft
seats may break down, leading the valve to leakage.
Advantages
Disadvantages
The main difference between metal seated valves as against the soft seated trunnion ball valves is
its ability to survive high temperatures and harsh service conditions. They can withstand severe
hydraulic shock, flashing, abrasive process fluid, and higher temperatures up to and above 1,000 °
F. They are also suitable for use in high corrosion or erosion applications.
Advantages
Disadvantages
Heavy design
The valve body of a trunnion ball valve can have one or more pieces joined together through welded
joints. There are two kinds of trunnion ball valves based on its number of pieces.
This valve comes with two pieces of the casing that are attached to each other via threaded
connections. One piece of the casing can be easily opened to reach the valve for repair or cleaning.
However, the valve must be separated from the pipeline; then, the covering can be installed.
The three-piece trunnion ball valves are a step ahead of its two-piece version. They've got three bits
of the casing that are bolted together. You should remove one section to access the inside of the
valve for maintenance and repair. However, there is no need to disconnect the valve from its
pipeline to remove it for maintenance.
Forged steel trunnion ball valves are made using a 'forging' process. Forging is based on thermal
energy being applied to solid steel blocks and then using mechanical forces to further process the
steel into a finished product. This method is used to produce extremely solid and hard-wearing
valves. SIO Forged Steel Valves, for example, are used in mining and mining processing, agriculture
and livestock handling, aeronautics, automotive industry, brickworks, stormwater plants, rendering
plants, asphalt plants, power and water industries, pharmaceuticals, chemical industry, cosmetics
industry and more.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 14/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Advantages
Disadvantage
Casting is a kind of molding by injection, pouring molten liquid metal into the prepared mold. After
refrigeration, it shapes castings. Technically, casting can be categorized into sand casting, pressure
casting, investment casting, shell casting, casting without a cavity, casting with low pressure, casting
with gravity, etc.
Valve casting means that the parts, including frame, and bonnet are cast. Unlike forging, casting
makes use of liquid metal to produce valves. Casting is effective in making valves with complex
sizes, patterns, and shapes.
Advantages
Disadvantages
The Trunnion ball valves are incredibly versatile. They are used in many different types of industries
because of their customizable characteristics. For example, the Trunnion Mounted Ball Valve
features O-rings and fire-safe stem packs that prevent leakage. It also comes with stainless steel
seal injection fittings for emergency stem or seat sealing. Trunnion mounted ball valves are widely
used in the chemical, petrochemical, oil and gas, LNG, and hydrocarbon Leave
industries.
a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 15/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
They are also used for a variety of applications, including skids such as turbine, compressor,
generator and separator, field gas, polymer, LNG, crude oil and industrial gas processing plants,
tank farms, automated process applications, hydrocarbon processing, and oil refinery feedstock
lines. Trunnion ball valves are suitable for large-scale, high-pressure, and compact, low-temperature
applications.
Steam service
It is important to keep Trunnion ball valves in optimal performance. This is why the maintenance of
all valves is vital. Maintenance of Trunnion ball valves make them available for use in the installation
for much longer.
Soft seated valves, while offering the advantages of a quarter turn, are only suitable for clean
service. As most of the service is not completely clean, there are maintenance options. As you will
see in the case of trunnion ball valves, the use of emergency sealant injection may often attract
debris to the seat to further damage it.
Flushing is Necessary
A flushing agent must be used for this reason to facilitate the cleaning. Continuous lubrication is
required in the moving parts to prevent rust and wear and tear.
The Trunnion mounted ball valve ensures that the sealant injection facilities have the correct internal
control valves and also ensures that the valve is fitted with body, ventilation and drain fittings,
packing injectors and lift lines, if necessary. For emergency sealant injection, the shot of synthetic
lubricants into the seat and seal area enables the leaking seat to be sealed in an emergency.
The soft seat inserts can be affected by just the slightest amount of pollutants trapped in the fabric.
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 16/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
As mentioned above, flushing agents should be used to remove grease from the seating area, as
this may cause more harm to the seat as more debris is attracted.
Construction debris left in the line will wreak havoc on soft seated valves as upstream parts will be
contaminated. It is recommended that the line be purged of nitrogen before turning a soft seated
valve. By injecting sealant into the seating area, the valve torque can be decreased by up to 40
percent, and many operators choose to retain the synthetic lubricant in the seating area for this.
Spraying is another maintenance method for Trunnion ball valve. Not spraying away impurities from
the seat of the valve will increase torque by 80%. This makes emergency shutdown and functional
valves a major problem.
Continuous inspection and repairs are necessary to keep a healthy operation in plants. As always,
consult an inline valve repair professional as there are various scenarios depending on the
operation, size, class & design of the system you are using.
Shinjo Company
Shinjo Company focuses on manufacturing valves and pumps, including ball valves, check valves, gate valves,
globe valves, butterfly valves, safety valves, hydraulic control valves, pressure reducing valves, needle valves,
cast steel valves and diaphragm pumps, split case pumps, centrifugal pumps, multistage pumps, submersible
pumps, etc.
Stay Connected
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 17/18
11/8/22, 5:50 PM Trunnion Ball Valve Detailed Introduction - Shinjo Valve
Latest News
Contact Us
Copyright © 2016 Shanghai Shinjo Pump & Valve Co., Ltd. All rights reserved
Leave a message x
www.shinjovalve.com/news/trunnion-ball-valve-detailed-introduction.html 18/18