Professional Documents
Culture Documents
B.O.Q Girls Hostel
B.O.Q Girls Hostel
B.O.Q Girls Hostel
Q
OF
GIRL'S HOSTEL- II (1 NO.)
FOR
PROPOSED NATIONAL LAW UNIVERSITY ORISSA
AT NARAJ, CUTTACK
CONSULTANT :
Page 1
ABSTRACT COST
TOTAL Rs.
Page 2
B.O.Q OF GIRL'S HOSTEL-II (1 NO.)
FOR PROPOSED NATIONAL LAW UNIVERSITY ORISSA AT NARAJ, CUTTACK
CIVIL WORKS
Page 3
Sl.No. Description Unit Qty. Rate Amount
5 Dismantling Brick work in cement mortar
incluiding T & P and scaffolding wherever
necessary, sorting the dismentled material ,
disposal of unserviceable material and stacking
the serviceable material with all lifts and lead of
1000 meters as per direction of Engineer-in-
Charge.. Cum. 140
Rate in figure:
Rate in word:
7 ANTI-TERMITE TREATMENT :
Page 4
Sl.No. Description Unit Qty. Rate Amount
(d) Junctions of wall and floor shall be treated by
making 30 mm wide 30 mm deep channels at
the junction. Holes are made in the channel at
150 mm apart up to ground level with crow bar
then chemical emulsion is poured. At the rate of
7.5 litres per sqm. of vertical wall or column
surface.
Page 5
Sl.No. Description Unit Qty. Rate Amount
10 Providing lifting, hoisting and laying reinforced
cement concrete to all type of concreting work to
base of columns and footing, columns, beams,
plinth band, lintels, chajja, shaft, fins, roof slabs,
balconies, stair cases, parapets, window wills,
lofts, railing, jally, copping or in places as shown
in the drawing or as directed with 20 mm and
down graded size black hard crusher broken
chips of approved quality from approved quarry
including mixing and vibro compacting to proper
shape and size, level and plumbs and finishing
the exposed surfaces smooth (if required
providing plaster with cement mortar (1:4)
wherever necessary without any extra cost)
scaffolding, including, watering and curing the
required period, including cost of all materials,
labour, conveyance, loading and unloading,
royalties, sundries, tools and plants, etc.,
complete as per direction of the Engineer-in-
charge including cost of all materials and labour.
M-25 Grade Concrete in Foundation and Plinth. Cum. 604.34
Rate in figure:
Rate in word:
Page 6
Sl.No. Description Unit Qty. Rate Amount
12 Providing & laying 40 mm thick damp-proof
course to all masonry works as per
specifications in 1:2:4 with 12.5 mm and
downsized aggregates the DPC shall be laid in
two layers of 20 mm thick each etc. complete
as per specification, drawings and as directed
by Engineer-in-charge. Sqm. 168
Rate in figure:
Rate in word:
13 PILE WORK
Page 7
Sl.No. Description Unit Qty. Rate Amount
15 Vertical load (downward/uplift) and lateral load
testing of piles in accordance with IS 2911 (Part
IV) including installation of loading platform and
preparation of pile head or construction of test
cap and dismantling of test cap after test etc.
complete as per specification and the direction
of Engineer-in-charge.
Routine test Per test 3
Rate in figure:
Rate in word:
Page 8
Sl.No. Description Unit Qty. Rate Amount
19 Providing, laying & binding of M.S. round /
deformed / tor steel reinforcement bars of
required diameters for straightening, cutting to
size, bending, and binding the grills, lifting and
placing in position at all heights & locations as
per design complete including cost of bars, cost
of binding wires 22 gauge, labour, conveyance,
loading and unloading, taxes, royalties,
sundries, tools and plants upto floor five level,
etc. complete as per the direction of the
Engineer-in-charge.(linear measurement will be
taken and quantity will be calculated on
standard weight of bars for all heights). Qntl. 4421.09
Rate in figure:
Rate in word:
Page 9
Sl.No. Description Unit Qty. Rate Amount
(e) Tripple stage centering and shuttering for roof
slabs, balconies and projections above 7200
mm and upto 10800 mm height. Sqm. 375.4
Rate in figure:
Rate in word:
Page 10
Sl.No. Description Unit Qty. Rate Amount
23 K.B. brick masonry work using (250 mm x 120
mm x 80 mm) with tolerance of size K.B. bricks
having crushing strength not less than 75 kg /
sqcm, mix (1 cement : 6 sands) in 250 mm thick
wall, immersing the bricks for minimum 6 hrs in
water before use, with all necessary projection,
splay cutting, circular moulding, corbelling, etc.,
including cost of all materials, labour,
conveyance, loading and unloading, taxes,
royalties, scaffolding, watering, curing, sundries,
tools and plants etc. upto floor five level, as per
the direction of the Engineer-in-charge in
superstructure. Cum. 1748.71
Rate in figure:
Rate in word:
Page 11
Sl.No. Description Unit Qty. Rate Amount
Page 12
Sl.No. Description Unit Qty. Rate Amount
32 Providing weather drip nosing of size 40 mm x
12 mm deep in cement mortar proportion 1 : 3. Mtr. 22.45
Rate in figure:
Rate in word:
Page 13
Sl.No. Description Unit Qty. Rate Amount
37 Extra for supplying and mixing approved quality
concrete admixture as per manufacturer's
specification in all kind of concrete work at any
location as per approved make. The admixture
shall be based on the design mix of cement
which shall be carried out by the contractor prior
to start of work. KG. 7454.72
Rate in figure:
Rate in word:
Page 14
Sl.No. Description Unit Qty. Rate Amount
41 Supplying, fabricating and fixing MS grills
madeup with M.S. square bar / round bar / flat
as per design and drawing including applying
two coat enamel paint over a coat of red oxide
primer and fixing the same to wooden door and
window frames as per requirement and direction
of Engineer-in-charge. Qntl. 218.27
Rate in figure:
Rate in word:
42 DOOR FRAME:
Page 15
Sl.No. Description Unit Qty. Rate Amount
Providing, fixing of stainless steel railing using
304 grade 18 gauge 50 mm dia, 25 mm dia, S.S.
pipes, 75 mm dia, S.S. Ball and 50 mm dia, S.S.
cap including cutting the pipes into length as per
design and jointing the pieces using electrode
welding fixing the frame in position including
grinding the welded section joints to obtain
smooth joints and finally polishing the joints to
complete the railing work all complete as per
design. 12 mm thick clear glass with etching
design should also be provided in between the
stair rail with the help of stainless knob and
screw etc. all complete and as per the direction
of Engineer-in-charge. Rmt. 157.42
Rate in figure:
Rate in word:
Page 16
Sl.No. Description Unit Qty. Rate Amount
(a) Doongri marble, Abu white marble, Baroda
green marble. Base rate- 700.00/- to 800/-per
sqm. Sqm. 216.99
Rate in figure:
Rate in word:
Page 17
Sl.No. Description Unit Qty. Rate Amount
Supplying, fitting and fixing nano polished
double charged vitrified tile in floors of size 600
mm x 600 mm of approved make with water
absorption less than 0.08% and conforming to
IS : 15622 of approved make, in all colours and
shades, laid on 20 mm thick cement mortar 1:4
(1 cement : 4 coarse sand), including grouting
the joints with white cement and matching
pigments etc., complete.including cost of all
materials, labour, T&P etc. required for the work
Basic Price -Base rate- 1550.00/- to 1650/-per
sqm. Sqm. 5354.64
Rate in figure:
Rate in word:
52 GRANITE CLADDING :
Page 18
Sl.No. Description Unit Qty. Rate Amount
Providing 18 mm thick approved quality & shade
polished granite slabs, and cutting to required
size laid over 20 mm thick under layer of cement
mortar (1:3) to masonry or concrete surfaces in
skirting, dado, risers and treads of steps,
counters, edtges / facias complete (screwing on
vertical surfaces if requied) to proper level and
joints filled with cement mixed with oxide
matching colour in requied proportion, washed,
acid cleaned, including cost of all materials,
labour, conveyance, taxes, royalties, scafflding,
watering, curing, sundries, tools and plants, etc.,
complete as per the direction of the Engineer-in-
charge. Base rate- 3700.00/- to 3800/-per sqm. Sqm. 101
Rate in figure:
Rate in word:
53 GRANITE FLOORING :
Page 19
Sl.No. Description Unit Qty. Rate Amount
55 Providing flooring with 300 x 300 x 25 mm PCC
Designer's Tiles of approved make , design and
shade set over 20 mm thick cement mortar (1:3)
mix joint panted with pigment to match the
shade of the tiles, laid in panels or in patterns
with necessary levelling course in floor, dado,
risers and treads of steps, pathways etc.
including cost of all materials, labour,
conveyance, taxes, royalties, scaffolding,
watering, curing, sundries, tools and plants etc.
complete as per the direction of the Engineer-in-
charge. Base rate- 1000/- to 1100/-per sqm. Sqm. 422.85
Rate in figure:
Rate in word:
56 WATER PROOFING:
Page 20
Sl.No. Description Unit Qty. Rate Amount
(ii) Supply and application of with approved make
water proofing primer followed by two coats of
with approved make water proofing between
two coat in sandwich systemor equivalent –
ready to use acrylic based , cementitious,glass
fibre reinforced elasticliquid applied waterproof
coating onto the prepared surface in a
continuous film on the floor of the sunken area,
taking the coating over the vertical surfaces on
to the floor and over the coving on to the wall
(before tiling) to at least 900mm above the final
finished floor level. The coating shall also be
continued on to the inner surfaces of the pipe
penetration holes.
Two coats shall be applied in right angle to each
other.Chemical Base Part A: liquid polymer and
additive, Part B: portland cement with selected
aggregate and additive. Layer Thickness 1.5
mm – 2.0 mm average Water Vapour
Resistance 3 g /m2 / day, Density Fresh slurry
density: ~ 2.00 kg/l at +27ºC Tensile Strength ~
4.56 N/mm2 after 14 days exposure (According
to ASTM D 2370) Bond Strength 2.0 N/mm2
.After PCC a coat of approved make water
proofing mixed with cement (1:2) to be applied
before tile installation.all complete and including
cost of all materials, labour, conveyance,
loading and unloading., taxes, royalties,
scaffolding, watering, curing, sundries, tools and
plants, etc., as per the direction of the Engineer-
in-charge.. Sqm. 383.4
Rate in figure:
Rate in word:
Page 21
Sl.No. Description Unit Qty. Rate Amount
(iii) Providing and filling the annular gap between
pipe periphery and concrete with non shrink with
approved make water proofing ; sealing the joint
mouths with with approved make water proofing
component, a moisture insensitive epoxy putty in
a continuous,10mm thick gasket around the
pipes to a width of approximately 15mm.all
complete and including cost of all materials,
labour, conveyance, loading and unloading.,
taxes, royalties, scaffolding, watering, curing,
sundries, tools and plants, etc., as per the
direction of the Engineer-in-charge. Nos. 584
Rate in figure:
Rate in word:
(b) EXTERNAL WATER PROOFING:
Supplying & applying one coat with approved
make external water proofing @5kg with white
cement/50kg bag and water to the external wall
of the painting(weathercoat) area followed by
two coat of with approved make weather coat
paint.all complete and including cost of all
materials, labour, conveyance, loading and
unloading., taxes, royalties, scaffolding,
watering, curing, sundries, tools and plants, etc.,
as per the direction of the Engineer-in-charge. Sqm. 11745.13
Rate in figure:
Rate in word:
(c) LIFT PIT WATER PROOFING:
(i) Providing & cleaning of RCC wall & floor surface
to remove dust and adhering particle completely
.Cutting the construction joint mouth
20mmx20mm deep andsealing the same by
using with approved make water proofing.Single
component high strength polymer modified
repair mortar.Supply and apply of non shring
expanding admixure of approved make and
cement slurry(1%by weight of cement) by
pressure grouting on inside wall and floor after
28days using 12mm dia 75mm long GI nozzles
1.5m C/C in the concrete. Extra nozzle are to be
provided along with construction joint.
etc.,complete as per the direction of the
Engineer-in-charge. Sqm. 20
Rate in figure:
Rate in word:
Page 22
Sl.No. Description Unit Qty. Rate Amount
(ii) Supply and application of with approved make
water proofing primer followed by two coats of
approved make water prrofing between two
coat in sandwich system – ready to use acrylic
based , cementitious,glass fibre reinforced
elastic liquid applied waterproof coating onto
the prepared surface in a continuous film on the
floor of the sunken area, taking the coating over
the vertical surfaces on to the floor and over the
coving on to the wall (before tiling) to at least
900mm above the final finished floor level. The
coating shall also be continued on to the inner
surfaces of the pipe penetration holes.
Two coats shall be applied in right angle to each
other.Chemical Base Part A: liquid polymer and
additive, Part B: portland cement with selected
aggregate and additive. Layer Thickness 1.5
mm – 2.0 mm average Water Vapour
Resistance 3 g /m2 / day, Density Fresh slurry
density: ~ 2.00 kg/l at +27ºC Tensile Strength ~
4.56 N/mm2 after 14 days exposure (According
to ASTM D 2370) Bond Strength 2.0 N/mm2
.After PCC a coat of approved make water
proofing component mixed with cement (1:2) to
be applied before tile installation and including
cost of all materials, labour, conveyance,
loading and unloading., taxes, royalties,
scaffolding, watering, curing, sundries, tools and
plants, etc., as per the direction of the Engineer-
in-charge. Sqm. 20
Rate in figure:
Rate in word:
Page 23
Sl.No. Description Unit Qty. Rate Amount
(i) Providing of cleaning of concrete surface to
remove dust, oil, grease including removal of
existing loose paint / coating,and cement
laitance with compressed air ,5% solution of
Sodium Hypochloride and using waterjet
including all material,labour,tools and tackles
complete.plugging the outlets,ponding test to be
done from soffit for primary repair.Repairing
surface irregularities,damaged concrete in base
slab,if any,with an acrylic polymer,of approved
make water proofing modified repair mortar
including a cost of bonding agent of the same
with cement slurry inclding all
material,labour,tool and taxes complete.as per
the direction of the Engineer-in-charge. Sqm. 2168.6
Rate in figure:
Rate in word:
Page 24
Sl.No. Description Unit Qty. Rate Amount
(iii) Supplying and applying an acrylic based
cementitous bond coat of with approved make
water proofing , the area shall be laid (in slope
min 1:100) with 50 mm avg( at the drain mouth)
thick concrete screed admixed with the
waterproofing compound,ensuring that the
screed gently slopes towards the drain pipes.
The concrete screed should be cast in panels of
3mx 3m maintaining 10mmx10mm groove and
keeping the same filled with PU based flexible
sealant, with approved make water proofing
.The rate inclusive of
material,labour,transport.etc.,complete as per
the direction of the Engineer-in-charge. Sqm. 2168.6
Rate in figure:
Rate in word:
Page 25
Sl.No. Description Unit Qty. Rate Amount
The structural members shall be framed as per
design and fixed to the R.C.C. member using
stainless steel rowl plugs and steel screws. The
job is inclusive of providing all materials,
fabrication, erection and filling of all gaps upto
Page 26
Sl.No. Description Unit Qty. Rate Amount
59 POLY CARBON SHEET ROOFING:
Supplying and fixing of 8 mm thick multi-wall
clear ploy carbon sheet over M.S. trusses
including all necessary bolting cutting the sheet
into sizes and finally fixing the same as second
floor height with all necessary staging required
for fixing the sheet in position and finally filling
the joints with weather silicon sea-lant to make
the joint leak proof all complete as per direction
of Engineer-in-charge. The rate is inclusive of all
labour, material, T&P, staging, royalities, taxes,
lead, lift and wastage etc. Sqm. 66.69
Rate in figure:
Rate in word:
60 EXPANSION JOINT:
Total: -
Rate in figure:
Rate in word:
Page 27
Sl.No. Description Unit Qty. Rate Amount
P.H. WORKS
Page 28
Sl.No. Description Unit Qty. Rate Amount
Rate in word:
Page 29
Sl.No. Description Unit Qty. Rate Amount
65 Constructing masonry chamber 30x30x50 cm
inside, in brick work in cement mortar 1:4 (1
cement :4coarse sand) for stop cock, with C.I.
surface box 100x100x75 mm (inside) with
hinged cover fixed in cement concrete slab 1:2:4
mix (1 cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size), i/c necessary
excavation, foundation concrete 1:5:10 ( 1
cement : 5 fine sand : 10 graded stone
aggregate 40 mm nominal size) and inside
plastering with cement mortar 1:3 (1 cement : 3
coarse sand)12 mm thick, finished with a
floating coat of neat cement complete as per
standard design: No. 26
Rate in figure:
Rate in word:
Page 30
Sl.No. Description Unit Qty. Rate Amount
B.O.Q FOR SANITARY INSTALLATION
Page 31
Sl.No. Description Unit Qty. Rate Amount
(a) 100 mm dia. weight not less than 100 gms. No. 111
Base Rate :- (Rs- 80.00 - Rs- 90.00)
Rate in figure:
Rate in word:
Page 32
Sl.No. Description Unit Qty. Rate Amount
79 Providing and fixing C.P. two way brass bib cock
confirming to IS : 8931 of approved make with
15 mm nominal bore.
Page 33
Sl.No. Description Unit Qty. Rate Amount
Page 34
Sl.No. Description Unit Qty. Rate Amount
(i) Towel rail 600 mm No. 60
Base Rate :- (Rs- 1,350.00 - Rs- 1450.00)
Rate in figure:
Rate in word:
Page 35
Sl.No. Description Unit Qty. Rate Amount
92 Providing and fixing pedestal wash basin with
32 mm C.P. Brass waste of standard pattern, 32
mm diameter C.P. Bottle trap and unions
complete including cutting and making good the
walls wherever required. All C.P. brass waste
and bottle trap of approved make. No. 7
Base Rate :- (Rs- 4,000.00 - Rs- 5,000.00)
Rate in figure:
Rate in word:
Total : -
Rate in figure:
Rate in word:
Page 36
Sl.No. Description Unit Qty. Rate Amount
95 Providing and fixing on wall face Unplasticised-
PVC (SWR) moulded fitting / accessories for U-
PVC (SWR) pipes confirming to IS : 13592 Type-
A including jointing with seal ring confirming to
IS : 5382 leaving 10 mm gap for thermal
expansion.
Rate in figure:
Rate in word:
Page 37
Sl.No. Description Unit Qty. Rate Amount
Rate in figure:
Rate in word:
(k) Single T with door 110 mm dia U-PVC (SWR) No. 130
Rate in figure:
Rate in word:
Page 38
Sl.No. Description Unit Qty. Rate Amount
99 Constructing brick masonry manhole with 45
class designation bricks in cement mortar 1:4 (1
cement :4 coarse sand) R.C.C. top slab with
1:2:4 mix (1 cement : 2 coarse sand : 4 graded
stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1 cement : 4
coarse sand : 8 graded stone aggregate 40 mm
nominal size) inside plastering 12 mm thick with
cement mortar 1:3 (1 cement : 3 coarse sand)
finished with a floating coat of neat cement and
making channels in cement concrete 1:2:4 (1
cement : 2 coarse sand : 4 graded stone
aggregate 20 mm nominal size) finished with a
floating coat of neat cement complete as per
standard design:
Inside size 90 x 80 cm and upto 145 cm deep
including C.I. Cover with frame (Medium duty)
500 mm internal diameter total weight of cover
and frame to be not less than 116 kg (weight of
cover 58 kg and weight of frame 58 kg.) No. 15
Rate in figure:
Rate in word:
Page 39
Sl.No. Description Unit Qty. Rate Amount
ELECTRICAL WORKS
Page 40
Sl.No. Description Unit Qty. Rate Amount
102 Supply of all required materials and recessed
wiring to 2/3 pin clip-in modular type 5 Amp plug
socket points with 2 (1 x 2.5 sq.mm.) PVC
insulated 1100 V grade stranded single core
FRLS copper wire run inside 19 mm PVC
Conduit (14 S.W.G) pipe laid concealed in
surface wall / ceiling along with 1 (1 x 1.0
sq.mm) PVC insulated FRLS copper wire as
earth continuity conductor and complete in all
respect including 5 pin 5 A sockets, switches,
plates, boxes and cover as specified and
making good to the damages caused and
complete with all respect as per the direction of
Engineer-in-charge / Consultant.
Page 41
Sl.No. Description Unit Qty. Rate Amount
(ii) Recessed wiring with 2 (1 x 4 sqmm) + 1 x (1 x
2.5 sqmm) copper wire from LDB to individual
16 Amp. Socket & A.C. Point. Mtr. 5063
Rate in figure:
Rate in word:
Incoming :
400amp four pole change over.- 1 set
400 Amp TPN SFU with HRC cartridge link Fuse
- 3 set.
RYB LED Type Indication lamp assembly - Set -
1
4 x 500 Amp Electrolytic copper busbar - 1 Set.
Page 42
Sl.No. Description Unit Qty. Rate Amount
0-500 Volt Voltmeter - 1 Set.
0-500 Amp. Ammeter- 1 Set.
3 Phase Digital Energy meter - 1 No.
Out going :
160 Amp TPN SFU - 2 No.
125 Amp TPN SFU - 4 No.
63 Amp TPN SFU - 1 No.
32 Amp TPN SFU - 5 No. Set 1
Rate in figure:
Rate in word:
Incoming
160 Amp TPN SFU with HRC cartridge link Fuse
- 3 set.
RYB LED Type Indication lamp assembly - Set -
1
4 x 300 Amp Electrolytic copper busbar - 1 Set.
Out going
40 Amp TPN MCB - 5 No.
63 Amp TPN MCB - 5 No. Set 1
Rate in figure:
Rate in word:
Incoming
160 Amp TPN SFU with HRC cartridge link Fuse
- 3 set.
RYB LED Type Indication lamp assembly - Set -
1
4 x 300 Amp Electrolytic copper busbar - 1 Set.
Out going
40 Amp TPN MCB - 6 No.
63 Amp TPN MCB - 2 No. Set 3
Rate in figure:
Rate in word:
Incoming
63 Amp TPN MCB - 1 No.
RYB LED Type Indication lamp assembly - Set -
1
Page 43
Sl.No. Description Unit Qty. Rate Amount
4 x 100 Amp Electrolytic copper busbar - 1 Set.
Out going
32 Amp DP MCB - 6 No. Set 1
Rate in figure:
Rate in word:
Incoming :
63 Amp. TPN MCB (overload, short ckt and
earth leakage protection(30mA)). - 1 No.
Outgoing :
25 Amp. SP MCB - 12 Nos. Set. 11
Rate in figure:
Rate in word:
Page 44
Sl.No. Description Unit Qty. Rate Amount
107 Supply and fixing of A.C. point wiring with 16
SWG sheet steel DB with 1p 20A MCB and
industrial plug socket unit) for Air conditioning
system and complete with all respect as per the
Engineer-in-charge or Consultant. No. 11
Rate in figure:
Rate in word:
Page 45
Sl.No. Description Unit Qty. Rate Amount
Rate in word:
112 EARTHING
113
3meter Electrode chemical earthing with 58mm
G.I galvanized electrode and 25x3mm G.I inner
Strip with 50x6mm copper connecting terminal
with 2bags of BFC (50kg)
No. 4
Rate in figure:
Rate in word:
Page 46
Sl.No. Description Unit Qty. Rate Amount
* EXTERNAL ELECTRICAL WORKS : (Sec. - A)
114 Supply of all required material and laying,
testing, commissioning of following sizes 1.1 KV
grade PVC insulated armored aluminium power
cable excavation of cable trench of 750 mm
deep in all kinds of soil, 150 mm thick and filling,
brick covering, back filling etc. including laying in
pre-laid Hume pipe/G.I. Pi;e and fixing only of
cable channel support as supplied and painted
with red oxide and aluminium paint including
supply of cleats, supports, fasteners and
accessories etc. properly clamping of cable and
complete with all respect as per the instruction
of Enginner-in-charge or Consultant.
Page 47
Sl.No. Description Unit Qty. Rate Amount
(e) 4 x 35 sqmm Ar. AL cable. Set. 2
Rate in figure:
Rate in word:
Page 48
Sl.No. Description Unit Qty. Rate Amount
Page 49
Sl.No. Description Unit Qty. Rate Amount
c 3C x 2.5 Sq. mm copper armoured for push
button station Rmts 35
Rate in figure:
Rate in word:
Page 50
Sl.No. Description Unit Qty. Rate Amount
b 25 mm dia Nos 2
Rate in figure:
Rate in word:
Page 51
Sl.No. Description Unit Qty. Rate Amount
B HYDRANT SYSTEM
1 Supplying, installing, testing and commissioning
of G.I. Pipes confirming to IS 1239 Pt -1 Heavy
grade(C class) with painting, suitable type of
supports like, anchor fasteners, bolts nuts,
clamps, "U" bolts, malleable specials such as
Reducers.Tees, elbows, flanges. Including
cutting, Welding, fixing in / on walls, ceiling by
using suitable supports etc. complete. structural
supports are measured as seperate line item
etc. complete.as per direction of Engineer-in-
charge.
a 100mm nominal dia Rmt 70
Rate in figure:
Rate in word:
Page 52
Sl.No. Description Unit Qty. Rate Amount
Page 53
Sl.No. Description Unit Qty. Rate Amount
C CIVIL WORKS
TOTAL(A+B+C)
Rate in figure:
Rate in word:
Page 54