This document provides a checklist for inspecting full body harnesses used at the AMNS Expansion Project in Hazira, Surat. The checklist includes 5 categories to inspect: [1] hardwares for damage or defects, [2] webbings for cuts or frays, [3] stitching for pulled or cut stitches, [4] lanyards for similar hardware and rope issues, and [5] anchoring hooks for cracks, corrosion, or locking problems. Inspectors are to note any issues found and provide an overall acceptance or rejection assessment.
This document provides a checklist for inspecting full body harnesses used at the AMNS Expansion Project in Hazira, Surat. The checklist includes 5 categories to inspect: [1] hardwares for damage or defects, [2] webbings for cuts or frays, [3] stitching for pulled or cut stitches, [4] lanyards for similar hardware and rope issues, and [5] anchoring hooks for cracks, corrosion, or locking problems. Inspectors are to note any issues found and provide an overall acceptance or rejection assessment.
This document provides a checklist for inspecting full body harnesses used at the AMNS Expansion Project in Hazira, Surat. The checklist includes 5 categories to inspect: [1] hardwares for damage or defects, [2] webbings for cuts or frays, [3] stitching for pulled or cut stitches, [4] lanyards for similar hardware and rope issues, and [5] anchoring hooks for cracks, corrosion, or locking problems. Inspectors are to note any issues found and provide an overall acceptance or rejection assessment.
Description Of Check Points Remark. S.No Hard wares - (D-Rings, Buckles, Back Pad) Any damage, distortion, sharp 1 edges, burrs, cracks and corrosion Webbings – Any cuts, burns, tears, abrasion, frays, excessive soiling and 2 discoloration.
3 Stitching – Any pulled or cut stitches.
Lanyards (Double) a) Hard wares - (D-Rings) Any damage, distortion, sharp edges, burrs, cracks 1 and corrosion 2 c) Stitching – Any pulled or cut stitches d) Synthetic rope – Any pulled or cut yarns, burns, abrasion, knots, excessive 3 soiling and discoloration Anchoring Hook a) Hard wares – (D-Rings) Any damage, distortion, sharp edges, burrs, cracks 1 and corrosion b) Physical damage – Any cracks, sharp edges, deformities and locking 2 operation 3 c) Excessive corrosion – Any corrosion which effects the operation 4 d) Fasteners – Any corrosion, tightness, damage or distortion. 5 RESULT (A: ACCEPTED ,R : REJECTED ) Contractor's Company Client's Representative Representative Representative