When selecting materials, several factors must be considered:
1. Cost of the material, environmental impact, chemical and physical properties, mechanical attributes, and the producing company.
2. Materials must then be tested using techniques like hardness tests, strength tests, impact tests, fluoroscopy, and testing machines to analyze quality and standards.
3. Cost is an important economic factor, but the selection must also consider quality and reliability of the materials.
When selecting materials, several factors must be considered:
1. Cost of the material, environmental impact, chemical and physical properties, mechanical attributes, and the producing company.
2. Materials must then be tested using techniques like hardness tests, strength tests, impact tests, fluoroscopy, and testing machines to analyze quality and standards.
3. Cost is an important economic factor, but the selection must also consider quality and reliability of the materials.
When selecting materials, several factors must be considered:
1. Cost of the material, environmental impact, chemical and physical properties, mechanical attributes, and the producing company.
2. Materials must then be tested using techniques like hardness tests, strength tests, impact tests, fluoroscopy, and testing machines to analyze quality and standards.
3. Cost is an important economic factor, but the selection must also consider quality and reliability of the materials.
ability to choose the materials using the following considerations:
• Cost of the material – is the amount of purchasing the materials, it may differ from one supplier to another even if the specifications are the same.
• Environmental consideration – anything that leads to the pollution of soil,water and air, especially its energy consumption impact. At the end of ICT hardware use, recycling, disposal, like e-waste this would be used in landfills and would provide impact and effect to the environment.
• Chemical properties – is a material properties evident during the time of its use will show chemical reaction.
• Physical properties – the identifiable and unique aspect of a material most particularly its basic capabilities.
• Mechanical attributes – the physical properties that any material exhibits when applied with forces, such as elasticity, tensile strength, elongation, hardness and fatigue limit.
• Company producing the material – the business name provides identity to the business and the product ut produces, especially when the enterprise produces unique and amazing products.
2. Testing of Material – this will help analyze the quality and standards of materials using the following techniques:
• Hardness tester – any device that checks the hardness of a material by measuring the durability of such material.
• Comprehensive strength test – it is more of mechanical test that measures the maximum amount of comprehensive load a material can bear before such material breaks.
• Impact test – is used to observe the mechanics how the material exhibit when it experience shook and such material immediately deform.
• Flouroscope – is an imaging machine which uses X-rays to determined the interior characterics of an object.
• Testing machine – a universal tester for materials for testing tensile strength and compressive strength of materials.
• Creep test – is subjecting the material to high temperature progressive deformation at constant stress test or ability to alter its form after such test has been taken.
3. Cost of material – the amount when buying or selecting the materials for specific project. Though this is economical in the selection process, the amount must consider also the quality and reliability of materials.
Activity 1: Directions: Re-arrange the letters to form the correct word mentioned in the definitions.
N I O T C E L E S - is the ability to choose materials using various factors.
Answer: __________