Professional Documents
Culture Documents
B17-40 and 41 - BASP - Brgs
B17-40 and 41 - BASP - Brgs
IMPERIAL
Shaft Part D
Description Wt. A B C
Size No. Min. Max.
1/2 006001 P2B-BASP-008 0.8 1-1/4 3-3/4 1 2-3/4 3
5/8 006004 P2B-BASP-010 1.1
1-1/2 4-1/4 1-1/8 3-1/8 3-3/8
3/4 006007 P2B-BASP-012 1.0
7/8 006010 P2B-BASP-014 1.9
15/16 006013 P2B-BASP-015 1.8 2 4-3/4 1-1/2 3-1/2 3-3/4
Sleeve Bearings
B17-40
SELECTION/DIMENSIONS
IMPERIAL
Sleeve Bearings - Babbitted
1/2” THRU 3-15/16” SPLIT BABBITTED JOURNAL BEARINGS
UNIFIED SAF
Mono Blocks and
Plummer Blocks
Shaft F Grease Cups #
G H J M
Size Bolt Pipe Tap No. Req’d Size
1/2 5/16 1/2 23/64 1-15/32 3/4 1/8 1 0
5/8
5/16 1/2 1/2 1-23/32 7/8 1/8 1 0
3/4
7/8
15/16 3/8 9/16 9/16 2 1 1/8 1 0
Sleeve Bearings
1
1-1/16
1-1/8
7/16 5/8 5/8 2-7/16 1-1/4 1/8 1 0
1-3/16
1-1/4
1-5/16
1-3/8
9/16 11/16 3/4 2-3/4 1-3/8 1/4 1 0
1-7/16
1-1/2
1-5/8
SLEEVOIL
1-11/16 9/16 25/32 13/16 3-1/16 1-1/2 1/4 1 0
1-3/4
1-15/16
11/16 13/16 15/16 3-1/2 1-3/4 1/4 1 0
2
2-3/16
11/16 1 1 3-13/16 1-7/8 3/8 1 2
2-1/4
2-7/16
11/16 1 1-1/8 4-1/4 2-1/8 3/8 1 2
2-1/2
Take-Up Frames
2-11/16 13/16 1-1/8 1-3/16 4-9/16 2-1/4 3/8 1 2
2-15/16
13/16 1-1/8 1-5/16 5 2-1/2 3/8 1 2
3
3-7/16 15/16 1-3/8 1-1/2 5-3/4 2-7/8 1/2 1 3
3-15/16 1 1-1/2 1-5/8 6-7/16 3-1/8 1/2 1 3
# Grease cups or pressure fittings may be obtained thru our distributors; one required per bearing.
See page B17-34 for grease fitting and reducer bushing part numbers
Note: All blocks have 2 base bolts and 2 cap bolts. Housings are split.
♦ No Published Metric Dimensions For This Product
Engineering
B17-41