Professional Documents
Culture Documents
Moto Racer 3 - LZM Ang
Moto Racer 3 - LZM Ang
Moto Racer 3 - LZM Ang
-----------------
Important note: the CD of the game must imperatively be inserted in the CD drive
before launching Moto Racer 3.
- If you experience problems with performance during the game you can modify the
settings of the menu which can be accessed during a race by selecting Options, then
Display. The following settings will then be displayed:
You will now see an improvement in performance according to the settings you have
changed.
- If you experience any problems getting the game to run, you should check that you
have installed the correct version of the drivers for your video card. To do this,
you need to go to the website of your video card manufacturer and download the
latest official drivers. If the problem continues, you should go to the website of
the graphics chipset manufacturer for your card. You should also refer to the
information supplied by the manufacturers.
If you experience problems with Moto Racer 3's operation or performance, you can
also try the following command line options:
You can enable these options by creating a shortcut from the Moto Racer 3
application (mr3.exe) located in the directory 'Program Files\motoracer3' and by
adding the command line(s) at the very end of the "Target" field (located in the
shortcut Properties window).
- If you are intending to run the game under Windows 2000 you are strongly
recommended to install at least Windows 2000 Service pack 1, as well as the
suitable drivers for your system card.
- If the game does not start properly, check whether you have enough free space
available on your hard disk.
Configuring joysticks/joypads:
-----------------------------------
Ctrl + J : Switch from Config 1 to Config 2, then to Config 3 and lastly to Config
4
(Bt=Button)
Config 1
--------
Right/Left : Direction
Bt 1 : Acceleration
Bt 2 : Turbo
Bt 3 : Brake
Bt 4 : Higher gear
Bt 5 : Lower gear
Bt 6 : Horn
Config 2
--------
Right/Left : Direction
Bt 1 : Acceleration
Bt 4 : Brake
Bt 10 : Turbo
Bt 8 : Higher gear
Bt 7 : Lower gear
Bt 2 : Horn
Config 3
--------
Analog Right/Left : Direction
Analog Up : Acceleration
Bt 2 : Turbo
Analog Down : Brake
Bt 4 : Higher gear
Bt 5 : Lower gear
Bt 6 : Horn
Config 4
--------
Analog Right/Left : Direction
Analog Up : Acceleration
Analog Down : Brake
Bt 10 : Turbo
Bt 8 : Higher gear
Bt 7 : Lower gear
Bt 2 : Horn
______________________________________PATCH_&_ADDONS_______________________________
_____________
Apart from providing more extensive support for video cards and small
configurations,
the MR3 patch v1.1 can also offer you:
Freestyle mode can be played from start to finish using the joystick,
all the combinations will be updated on our site.
For those keen on the view from inside, racing bikes now have a built-in digital
speedometer.
Simpler procedures for creating future bonuses, race tracks and bikes.
Support for Intel SSE (Pentium� 3) and SSE2 (Pentium� 4) instruction sets.