Professional Documents
Culture Documents
Technical Bulletin - DP02-2014 DP Joystic Responce When Controller Uptime Exceeds 250 Days
Technical Bulletin - DP02-2014 DP Joystic Responce When Controller Uptime Exceeds 250 Days
Technical Bulletin - DP02-2014 DP Joystic Responce When Controller Uptime Exceeds 250 Days
This bulletin is relevant for, and distributed to clients having a Kongsberg Maritime
DP, PM or Joystick system with the following product identification and software version:
Note! Full Auto positioning is not affected. The problem is only experienced in manual DP
Joystick mode or in mixed Joystick/Auto modes when any of the surge, sway or yaw axis are
controlled by using the joystick.
Corrective action
To overcome this problem KM recommends the following when operations allow for it:
The SDP and K-Pos systems with software versions 6.1.0 or higher allow the user to
access the uptime in the Equipment view, and also to print a report page containing the
uptime of all controllers. For SDP systems starting in Software version 5.0.3 and below the
controller uptime is not available in the equipment view, and a regular reset of the DP
controllers is therefore recommended for these systems.
Please see the attached procedure for how to access uptime information and to reset the
DP controllers.
Kongsberg Maritime can schedule for the SDP / K-Pos DP software to be updated during
next ordinary software service visit onboard.
For further information and/or support please contact Kongsberg Maritime, Global
Customer Support: Tel: + 47 33 03 24 07, e-mail: km.support@kongsberg.com
Yours faithfully,
Vice President
Global Customer Support Offshore
KONGSBERG MARITIME AS