Professional Documents
Culture Documents
Uvbl 210
Uvbl 210
2 Measurement of lamp intensity at 15" from the >1000 micro-W/cm² 2200 micro -W/cm² 0% 2200 micro -W/cm²
standards sensor after energizing for 5 minutes.
Remarks : This equipment is a non-adjustable testing device. This equipment is assigned in DSI.
Statement Of Traceability :
All standards used for calibration/verification are traceable to National Institute of Standards and Technology (N.I.S.T.) or other international/national standards. Its
calibration is carried out by either an ISO/IEC 17025: 2005 accredited calibration laboratory, or have been derived from accepted values/physical constants, or have
been derived by ratio/documented calibration techniques. All calibration performed are in compliance with SIGS Operating Procedures Manual, OPM Tier - II (ISO
9001: 2008)
This certified that the above mentioned measuring / test ( with the above mentioned serial number ) has been calibrated and is found to be acceptable for use in
measurement / verification of product dimensions to verify product conformance to drawings / specifications / customer requirements and national / international
standards / specs.
page 1 / 1