Professional Documents
Culture Documents
FR-18D System Update Procedure
FR-18D System Update Procedure
FR-18D System Update Procedure
Required Items
FR-18D
Computer
Update Data
Caution: Do not power off the FR-18D or remove the USB key during the
update. This can damage the instrument and may require it to be serviced.
DATAROM (folder)
a.rom
boot.img
PROGRAM.BIN
Startup
update
2. Connect the USB key to a computer and delete all other files on the key. Then,
copy the 6 items noted above to the root directory of the key.
3. With the power off, connect the USB key to the FR-18D.
4. Power on the FR-18D while holding down the Treble register 3 and Treble
register 4 buttons. Wait until all of the Treble Register (1-4) buttons light green.
Note: The update procedure takes about 35-45 seconds.
5. When the process has completed, power off the FR-18D and remove the USB
key.
6. With the FR-18D off, hold down treble registers [1] and [4] and then power on
the FR-18D.
7. Wait until treble registers [1] through [4] start flashing and then release
registers [1] and [4]. The FR-18D diatonic starts the initialization process. When
initialization is complete, the four treble registers stop flashing. The update is
complete.