Professional Documents
Culture Documents
AT-3046 To 3054
AT-3046 To 3054
Near Raj Petrol P mp, Opp, Shitala Mata Temple, N.H. 27, Shapar (VeravaQ,Dist. Rajkot.
P . No. : 02827253310, Email: alpha.lab11@gmail.com CERTIFICATE NO.: TC-7752
NABL ACCREDITED LABORATORY
METALLURGICAL LABORATORY As per ISO flEG : 17025 - 2017
Result:
Final Gauge Length (mm)
Final Diameter (mm)
Tensile Load / Break Load (N)
Tensile Strength (MJ=la)
Yield Load (N)
Yield Stress (MPa)
Elongation % : 43.920
Reduction in Area % : 60.190
Fracture :WG.L.
Remark:
~
N. D. Patil (OM) I G. P. Kalariya (TM)
~
Tested By Reviewed & Authorized By Witnessed By
Tenns & Conditions:
(1) Sample is not drawn by ALS. This result is related only to e sample tested.
(2) This certificate shall not be reproduced, except in full, with ut the written approval of ALS.
(3) If balance material is available after testing, tt will be retai ed for 15 days maximum. If customer wants to retain tt for one month from this date. he has to inform in writtng or he can collect the same.
(4) While ALS has made their best endeavors to provide ace rate and reliable informationALS is not responsible for any financial liability due to any act of omission or error made.
(5) • Information provided by customer.
N. O.
4i2
, Patil (OM) 1 G. P. Kalariya (TM)
Tested By Reviewed & Authorized By Witnessed By
Terms& Conditions:
(1) Sample is not drawn by ALS. This result is related only to ",e sample tested.
(2) This certificate shall not be reproduced, except in full, withput the written approval of ALS.
(3) If balance material is available after testing, it will be ret,i ed for 15 days maximum. If customer wants to retain it for one month from this date, he has to infonn in writing or he can collect the same.
(4) WhileALS has made their best endeavorsto provide a rate and reliable information.ALS is not responsiblefor any financial liabilitydue to any act of omissionor error made.
(5) , Information provided by customer.
~
N. D. Patil (OM) / G. P. Kalariya (TM)
~
Tested By Reviewed & Authorized By Witnessed By
Terms & Conditions :
(1) Sample is not drawn by ALS. This result is related only to ",e sample tested.
(2) This certificate shall not be reproduced, except in full, withput the written approval of ALS.
(3) If balance material is available after testing, it will be retai ed for 15days maximum. If customer wants to retain it for one month from this date, he has to inform in wrlting or he can collect the same.
(4) While ALS has made their best endeavors to provide ace rate and reliable information. ALS is not responsible for any financial liability due to any act of omission or error made.
(5) • Information provided by customer.
370-21
m
m
Initial Gauge Length
Initial Area : 121.9 1 rnm-
Result:
Final Gauge Length (mm)
Final Diameter (mm)
Tensile Load / Break Load (N)
Tensile Strength (MPa)
Yield Load (N)
Yield Stress (MPa)
Elongation % : 46 620
Reduction in Area % : 55627
Fracture :WG.L.
Remark:
4
. N. D. Patil (QM) / G. P. Kalariya (TM)
Tested By Reviewed & Authorized By Witnessed By
Terms& Conditions:
(1) Sample is not drawn by ALS. This result is related only to
(2) This certificate shall not be reproduced, except in full with t the written approval of ALS.
(3) If balance material is available after testing, ITwill be retai ed for 15 days maximum If customer wants to retain it for one month from this date, he has to inform in writing or he can collect the same.
(4) While ALS has made their best endeavorsto providea rate and reliable information ALS is not responsiblefor any financial liability due to any act of omissionor error made.
(5) • Information provided by customer.
~
N. D. Patil (OM) I G. P. Kalariya (TM)
~
Tested By Reviewed & Authorized By Witnessed By
Terms & Conditions:
(1) Sample is not drawn by ALS. This result is related only to e sample tested.
(2) This certificate shall not be reproduced, except in full with ut the written approval of ALS.
(3) If balanoe material is available after testing, it will be retai ed for 15 days maximum If customer wants to retain it for one month from this date, he has to inform in writing or he can collect the same.
(4) WhileALS has madetheir best endeavorsto providea rate and reliableinformationALS is not responsiblefor any financiatriebilitydue to any act of omissionor error made.
(5) • Information provided by customer.
Result:
Final Gauge Length (mm) : 7:;:.64
Final Diameter (mm) : 7. 2
Tensile Load I Break Load (N) : 81040
Tensile Strength (MFla) : 6~4.8;
Yield Load (N)
: 6!640
Yield Stress (MPa) : 5 0.42
Elongation % : 4 .280
Reduction in Area % : 6 .175
Fracture :WG.L.
Remark:
~
N. D. Patil (OM) I G. P. Kalariya (TM)
~
Tested By Reviewed & Authorized By Witnessed By
Terms& Conditions:
(1) Sample is not drawn by ALS. This result is related only te the sample tested.
(2) This certificate shall not be reproduced, except in full, wit rout the written approval of ALS.
(3) If balance material is available after testing, it will be retai ed for 15 days maximum. If customer wants to retain it for one month from this date, he has to inform in writing or he can collect the same.
(4) While ALS has made their best endeavors to provide ace rate and reliable information ALS is not responsible for any financial liability due to any act of omission or error made.
(5) • Information provided by customer.
Result:
Final Gauge Length (mm)
Final Diameter (mm)
Tensile Load / Break Load (N)
Tensile Strength (MFla)
Yield Load (N)
Yield Stress (MPa)
Elongation %
Reduction in Area %
Fracture
Remark:
~
~, N. D. Patil (OM) 1 G. P. Kalariya (TM)
Tested By Reviewed & Authorized By Witnessed By
Terms & Oonditions:
(1) Sample is not drawn by ALS. This result is related only t the sample tested.
(2) This certificate shall not be reproduced, except in full, wit out the written approval of ALS.
(3) If balance malerial is available after testing, it will be retai ed for 15 days maximum. If customer wants to retain rt for one month from this date. he has to inform in writing or he can collect the same.
(4) While ALS has made their best endeavors to provide a rate and reliable information. ALS is not responsible tor any financial liability due to any act of omission or error made.
(5) • Information provided by customer.
Near Raj Petrol Pu~p, Opp. Shitala Mata Te~ple, N.H. 27, Shapar.(Veraval), Dist. Rajkot.
P . No. : 02827253310, Email: alpha.lab11@gmall.com CERTIFICATE NO.: TC-7752
NABL ACCREDITED LABORATORY
METALLURGICAL LABORATORY As per ISO flEC : 17025 - 2017
: ASTM 370-21
:8.72m
: 35.00 m
Initial Area : 59.743 rnm-
Result:
Final Gauge Length (mm)
Final Diameter (mm)
Tensile Load I Break Load (N)
Tensile Strength (MPa)
Yield Load (N)
Yield Stress (MPa)
Elongation % : 35457
Reduction in Area % : 59.344
Fracture :WG.L.
Remark:
... ~
N. D. Pat1l(QM) I G. P. Kalariya (TM)
~
Tested By Reviewed & Authorized By Witnessed By
Terms & Conditions:
(1) Sample is not drawn by ALS. This result is related only to the sample tested
(2) This certificate shall not be reproduced. except in full. wi out the written approval of ALS.
(3) If balance material is available after testing, it will be retai ed for 15 days maximum If customer wants to retain it for one month from this date. he has to inform in writing or he can collect the same.
(4) While ALS has made their best endeavors to provide a rate and reliable information ALS is not responsible for any financial liability due to any act of omission or error made.
(5) * Information provided by customer.
.. ~