Professional Documents
Culture Documents
Electro 1 E4 Construction of Basic-Lighting Circuit
Electro 1 E4 Construction of Basic-Lighting Circuit
Electro 1 E4 Construction of Basic-Lighting Circuit
Exercise No. 4
Document Practical Exercise # 1.4
Course Outcome CO6. Draw a simple electrical circuit diagram, construct, and test as per specification
Construct a simple lighting circuit consisting of bulbs, circuit breaker, switch, and power
Learning
supply and calculate the power consumption of the lighting circuit and identify the current
Outcomes
rating of the circuit breaker to be used.
In the electrical laboratory room and electronic control module the student must be able to:
-Construct a basic lighting circuit and calculate parameters such as power
Task consumption of the lighting circuit and identify the current rating of the
circuit
Safely perform the practical activity, following procedures as stated in the manufacturer’s
Students Action
manual and meeting the requirements as stated in the task
STCW A-III/1 F2.C1 Column 4
1. Operations are planned and carried out in accordance with the operating manuals,
Performance established rules and procedures to ensure safety of operations
Criteria 2. Electrical, electronic and control systems can be understood and explained with
drawings and instructions
(See attributes below)
Method of
Attribute Performance Criteria Performance Standard Complied Not Complied
Grading
Safety Wear the appropriate PPE Wears the correct set of Personal
(Personal Protective Protective Equipment:
Equipment) - Insulated Gloves
Compliance
- Eye protection
- Cover All
- Safety Shoes
Read the safety operating Read the manufacturer’s safety manual
manuals regarding the and operating information on Motor
Compliance
specifications of the power control Control Module and Power Electronic
module. Module.
Read the danger cautions, know the type
and magnitude of energy that the
Compliance
machine or equipment utilizes, and
understand the hazards.
Isolate the electrical power supply Ensure Power Circuit Breakers are
Compliance
Switched OFF
Procedure Prepare the electrical components for A.C
Lighting Circuit Construction:
Wiring
Diagram
Fig.
1.1.1 AC
Series
Lighting
Wiring
Diagram
AC Lighting
Parallel
Circuits
Table 1.1
Failure State: The examinee will be rated “FAILED” when any of the following is committed.
_________________________________ ________________________________
Signature over Printed Name of Instructor Signature over Printed Name of Student
Date: _________________ Date: _______________