The document provides specifications for two pipe fitting installation tools:
1) The IT100 is for 3" pipe fittings and has minimum pipe insertion depths of 120mm and distances to cut points for forward installation of 324mm.
2) The IT400 is for 4" pipe fittings and has minimum pipe insertion depths of 140mm and distances to cut points for forward installation of 332mm.
3) Both tools require a minimum of 16mm space between fittings.
The document provides specifications for two pipe fitting installation tools:
1) The IT100 is for 3" pipe fittings and has minimum pipe insertion depths of 120mm and distances to cut points for forward installation of 324mm.
2) The IT400 is for 4" pipe fittings and has minimum pipe insertion depths of 140mm and distances to cut points for forward installation of 332mm.
3) Both tools require a minimum of 16mm space between fittings.
The document provides specifications for two pipe fitting installation tools:
1) The IT100 is for 3" pipe fittings and has minimum pipe insertion depths of 120mm and distances to cut points for forward installation of 324mm.
2) The IT400 is for 4" pipe fittings and has minimum pipe insertion depths of 140mm and distances to cut points for forward installation of 332mm.
3) Both tools require a minimum of 16mm space between fittings.
MAS SS LTCS MAS LTCS A Space Between Fittings, Minimum 16 16 16 16 16 B Pipe Insertion Depth 120 120 120 140 140 C Length of Installed Lokring End, Nominal 87 87 87 100 100 D Pipe Spool Length Between Fittings, Minimum 250 278 256 288 286 E Distance to Cut Point for Forward Install 324 332 324 332 332 E Distance to Cut Point for Reverse Install* 148 185 148 172 172 F Minimum Spacing Between Parallel Pipes, Centre to Centre 180 178 178 204 204 Minimum Spacing between Parallel Pipes with Lokrings 189 191 189 216 212 G adjacent to each other, Centre to Centre H Tool Height 264 293 J Tool Width 261 286 K Tool Depth 268 432 Weight of Tool 27 KG 43 KG All Dimensions in mm. *Lokring Flanges and Tees can only be installed using the forward method